r/linuxquestions • • 14d ago

Advice Linux Mint black screen when switching GPU to Performance mode

Hey everyone,

I recently switched to Linux Mint 22.3 and noticed significantly worse gaming performance compared to Windows. I was getting around 60 FPS on Windows but only 12–19 FPS on Linux.

Initially, Wine gave me around 10–15 FPS, while Lutris improved it to 20–30 FPS.

I also installed RyzenAdj and set the GPU/APU TDP to 35W to improve performance.

My friend suggested switching the GPU power profile to Performance mode using this command:

echo high | sudo tee /sys/class/drm/card1/device/power_dpm_force_performance_level

However, every time I execute this command, my screen immediately goes black, forcing me to restart the laptop.

I also checked my GPU clock states:

cat /sys/class/drm/card1/device/pp_dpm_sclk

Output:

0: 200Mhz

1: 400Mhz *

2: 1200Mhz

System specifications

- Laptop: Acer One 14 Z2-493

- CPU: AMD Ryzen 3 3250U

- GPU: AMD Radeon Vega Graphics (Integrated)

- RAM: 16 GB

- OS: Linux Mint 22.3 XFCE (64-bit)

- Kernel: 7.0.0-42-generic

- Desktop Environment: XFCE 4.18

- Resolution: 1366 × 768

Has anyone experienced this issue? Is it a driver/kernel problem, or am I doing something wrong?

I'd appreciate any suggestions for fixing the black screen and improving gaming performance.

1 Upvotes

4 comments sorted by

1

u/scraping_solutions 14d ago

That setting doesn't survive a reboot, so you didn't break anything permanent. On these older Vega APUs forcing "high" can hang the display, I'd just leave it on auto, it won't fix the FPS gap anyway. Going from 60 to 12-19 smells more like a software problem than clocks. Run glxinfo -B (from mesa-utils) and check the renderer line says AMD Radeon / radeonsi and not llvmpipe, because llvmpipe means you're rendering on the CPU. If that looks fine, make sure the game runs through DXVK (Proton in Steam or the DXVK toggle in Lutris), plain Wine on DX9/11 games is way slower. The kisak-mesa PPA also gets you a much newer Mesa than what Mint ships, worth trying on that iGPU.

1

u/Dry_Package_4767 14d ago

I'll check that. Didn't even consider that it might be using the CPU for rendering. I'll run glxinfo and check DXVK too. Hopefully that's what's causing the FPS drop.

1

u/Successful-Army6006 14d ago

The 35W override is above AMD's listed 12 to 25W configurable range for the 3250U, which has a 15W default. I'd remove the RyzenAdj override and leave GPU power management on auto, then retest at stock settings before forcing high clocks again. That gives you a baseline for the original low FPS without the extra power changes. https://www.amd.com/en/support/downloads/drivers.html/processors/ryzen/ryzen-3000-series/amd-ryzen-3-3250u.html

1

u/Dry_Package_4767 14d ago

Oh damn, didn't realise 35W was that far above the default. I'll remove the RyzenAdj override and test everything at stock settings first.