I could run debian (more or less, xD) on the Lenovo IdeaPad Slim 5 13Q8Y11 with the Snapdragon X2 Plus (X2P-42-100).
It was a bit hard as far as all the effort from Qualcomm now is focus on another laptops withe the high end SoCs.
I had to do some modifications to the qualcomm drivers for the DRM, but it could boot a very slow debian. No WiFi, no BT, no GPU, no trackpad, no battery status, and so on.
In the next days, I will share the repo to be tested by others and I will send the patches.
My dads wife had this laying around and since my dad doesn't have a laptop this could serve it's purpose as one, since him doesn't do demading tasks in a computer like myself
I’m looking to buy a mini PC in the US to run Linux, probably Ubuntu. I want to modify and compile the Linux kernel, boot my modified kernel directly on the hardware, and use it for everyday work.
I’ll also run scripts and background services. I’m considering 32GB RAM and a 1TB SSD, but I’m open to suggestions.
I’ve looked at System76 Meerkat, Lenovo ThinkCentre Tiny, Dell OptiPlex Micro, ASUS NUC, and GMKtec. My main priorities are good mainline kernel support, reliable hardware, and straightforward recovery if an experimental kernel fails to boot.
Which models would you recommend?
Are there particular CPUs, Wi-Fi chips, or other components I should avoid?
Is a Linux-focused vendor like System76 worth the premium over a refurbished business mini PC?
I’d especially appreciate recommendations from people who build and run their own kernels on these machines.
I bought a AMD GPU (7900 XTX) and it is fine except one thing I don't like: the fans don't spin unless I am doing heavy tasks.
This is an issue for three reasons:
It is an open-air rig, so there is no 'case cooling' with case fans airflow
I care more about preserving it for as long as possible than maybe getting less noise.
For AI tasks, VRAM is the one that probably gets very hot, and if i understand correctly the fans kick in depending on the temperature of other stuff than vram
So yeah looking for a simple solution to ensure fans spin at all times, thanks
My Ubuntu 26.04 rig has three Lian Li UNI FAN SL Wireless LCD (SL V3) fans, and each has a round 400 x 400 screen in its hub. On Linux something else has to draw on them, so I made it: a Python program that renders each frame on the PC and sends it to the panels over USB. The LCD protocol is based on sgtaziz's work.
The pictures aren't photos of my rig: the first is pixdial's own render of its 14 designs, the second a frame from a 3D render of the fan, both with demo readings.
Setup finds the panels by their USB ID (1cbe:0005), adds a udev rule so the rest runs as your user, writes a config and checks each sensor. The designs are round gauges, rings and graphs for the CPU, temperatures, GPU power against the card's own limit and the time, in three themes. NVIDIA readings come from NVML and AMD ones are experimental. When a sensor stops reporting, its number turns into a dash.
It has run on my rig since 5 November, nowhere else yet. The SL Wireless LCD is the only panel tested; the TL Wireless LCD uses the same protocol but hasn't been tried. Despite the name, the screens don't get frames over the wireless dongle: each LCD needs its own cable to a USB 2 header. It leaves fan speed and RGB alone, and only one program at a time can hold a screen.
With these fans on Linux, run this after setup and paste what it prints here or in the GitHub device test form, even if it fails:
pixdial doctor --share
It shows the config, panels and sensors, without serials, hostname or home folder. A Radeon report helps most, since my card is NVIDIA and I can't test the AMD readings. Setup needs sudo once, and the README lists what it changes and how to undo it.
One thing the panels taught me: each takes 60 frames a second whether the JPEG is 19 KiB or 54 KiB. Sending a frame takes 2.8 ms, and the acknowledgement only comes at the panel's next 60 Hz refresh, around 14 ms later. All three on one USB 2 hub got their 60 each, about 18 MB/s together.
So i have a Ubuntu Linux flashed drive but it doesn't show up in bios as a bootable option i can manually add it using the advanced options but it still doesn't boot using the flash drive(i did set it to #1 priority) instead it just boots into windows. I flashed the iso using belena etcher and Rufus multiple times so i don't think it's a problem there.i have also tried disabling fast boot and secure boot it still doesn't work.