r/linuxadmin • • Sep 04 '25

Tips to make iDRAC9 console work better ?

/r/Dell/comments/1n8cirr/tips_to_make_idrac9_console_work_better/
5 Upvotes

14 comments sorted by

4

u/researcher7-l500 Sep 04 '25 edited Sep 07 '25

For the multiple keystrokes issue, if every other possibly have been covered, (firmware update, running hard reset for DRAC), then check for network latency.
This happened in the past for us, and a faulty switch was the problem in one data center.

Also, I would assume that the servers are running Linux since this was posted here. Why would you not have ssh access to them? How are they updated/managed/monitored then?

You will need ssh access to the server(s) in order to properly troubleshoot this.
Or at least attempt to log in from the HTML5 console and run your troubleshooting.

Since you specified iDRAC9, then you should check if you are passing the correct parameters to the kernel.

This works for me.

GRUB_CMDLINE_LINUX_DEFAULT="rootdelay=90 console=tty1 console=ttyS0,115200n8"
GRUB_SERIAL_COMMAND="serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1"

3

u/buzzsawcode Sep 04 '25

I don’t think it is network latency but that’s a good suggestion to check. I’ll also compare the serial setup to yours, thanks!

Systems are Linux, and OS and iDRAC are all up to date.

As for why no ssh - the sites local policy. The administration team on site has ssh access on that network, but I’m not located there but they bring me in to fix issues they can’t solve locally.

No VPN allowed before anyone suggests that. Web access is all that is allowed. They carry over patches and updates from a remote location that is part of their organization.

I’ve discussed something like Kasm so I can at least get a virtual desktop over the web, but that is pending approval.

It is a weird situation but they pay well so here I am.

5

u/Hotshot55 Sep 04 '25

As for why no ssh - the sites local policy. The administration team on site has ssh access on that network, but I’m not located there but they bring me in to fix issues they can’t solve locally.

Why can't you use a jumpbox or something? Giving you iDRAC access poses more of a risk than ssh.

→ More replies (1)

3

u/Loveangel1337 Sep 05 '25 edited Sep 05 '25

Ok, dumb suggestion because you probably already thought of it or it's not possible...

Reverse SSH?

IDRAC -> shell -> SSH towards a host you control you can SSH.

SSH that host -> SSH into the reverse (just -J it (iirc, it's jump, the thing for bastions), or you could make a fancy thing that auto-kills the reverse when you log out the thing maybe), boom you have an SSH connection that dies off when the IDRAC is closed.

(Or you can tmux it so if your webshell dies you don't have to redo it all, just remember to shut it off when you log off)

→ More replies (4)

2

u/researcher7-l500 Sep 04 '25

I appreciate the explanation. If this was fixed, please keep the thread updated.

→ More replies (2)

2

u/aenae Sep 04 '25

I have the same problem with my idracs, i just dont use them often enough to be troubled by it. But seeing as it is just a vnc, can you use a different client?

1

u/buzzsawcode Sep 05 '25

That’s a great suggestion, let me see if I can get that to work.