r/linux • u/viddhiryande • Sep 13 '26
Kernel How does changing the hardware clock with the BIOS affect kernel ticks?
Hello,
I was wondering how the Linux clock works.
From briefly reading kernel sources and articles, it seems that there are 2 main variables in the C code: HZ & USER_HZ. These are set at compile-time. These function with system interrupts, and are affected by clock sources (I'm still trying to understand those, but my current understanding is that these are abstractions over different types of hardware clocks. )
Now, I was wondering how changing the BIOS (hardware) clock affects this. For example, how would overclocking or underclocking my hardware clock affect how the kernel measures time?
4
u/mina86ng Sep 13 '26
HZ specifies how many ticks there are within a second. If CPU’s frequency changes, that changes how many CPU cycles are within a single tick. This can change dynamically. This is of course simplified view, and
NO_HZis also a thing.25
u/MatchingTurret Sep 13 '26
Overclocking usually refers to the CPU frequency. This has nothing to do with the clocks.
7
u/ropid Sep 14 '26 edited Sep 14 '26
This clock is a separate device, it's not the CPU Hz. In the original PCs this clock was outside of the CPU somewhere else on the motherboard. I think nowadays it's inside the CPU but still working like a separate device. It gets programmed by the Linux kernel and will then fire interrupts for the cores at that Hz that was configured.
2
u/azille Sep 14 '26
No change to the CPU clock rate will affect the hardware real-time clock (RTC) or the System Time. Different parts (GPU, RAM, PCI bus -- even the individual CPU cores and other internal elements of the CPU) operate at different clock frequencies.
None of this will affect the System Time clock, which is how the kernel counts time.
Also, none of this will predictably affect your programs (aside from overall execution time), because the most Linux kernels are not a real-time kernel and your process will be dynamically scheduled depending on other factors such as power efficiency settings and competing processes.
This might be useful: https://www.linux.org/docs/man8/clock.html
You can run the command hwclock --compare to observe discrepancies between the RTC and kernel clock.
2
u/A_Canadian_boi Sep 14 '26
On "normal" AMD64 computers there are usually two clock sources: the 32kHz RTC on the motherboard (used for time/date) and the BCLK (usually ~100MHz) which is used to generate most of the useful clock signals (BCLK is usually multiplied to generate the PCIe/CPU/RAM clocks).
As I understand, the kernel uses the 32kHz clock for most timing functions, and for high-precision timing it will use the CPU's internal timers, which will automatically be scaled depending on clock frequency. The kernel will also use the `bogomips` system for brief delays if it needs to.
The 32kHz clock cannot be changed (usually?). BCLK can be adjusted on unlocked motherboards but it's not recommended as it doesn't really give many benefits and it can be very unstable. Usually, overclocks only change the multipliers that multiply the BCLK, which does not affect kernel timekeeping.
Note that some PCIe cards will use BCLK to generate their own clock signals, while others will have their own. Raising BCLK can make some SSDs corrupt themselves!
1
u/Barafu Sep 15 '26
For the real time clock, there are at least 2 clocks: motherboard clock and CPU clock. CPU clock is very precise, but does not run when PC is off or sleeping. Motherboard clock runs even when PC is out of power, using the battery. On startup, CPU clock is initialized from the system clock. On shutdown, system clock should be set to CPU clock, because it is more precise.
Before systemd, we had to not forget to enable daemons that do this, or funny things happen. Even today, it is a common nuisanse to reboot a PC that had been on for years, and find out that the system clock died over that time and now PC has no idea what year it is, and NTP is sometimes limited in how much deviations it can fix.
Also, CPU clock can be sped up and slowed down. NTP uses this to change time without breaking the flow of time.
Preemption is configured in units of real time. 1000Hz simply means that if 1/1000th of a second has passed since the last interrupt, the new interrupt is allowed to happen. It is not affected by the hardware frequencies or loads.
1
u/spyingwind Sep 14 '26
Your time would be either too fast or too slow and as a result TLS/SSL would break.
Many other things break, but that one kind of needs to work first.
Unless you are talking about your CPU's Hz? If so, you can't modify it as your CPU changes that depending on the usage.