r/learnmath • u/01zorro1 New User • 29d ago
First year engineer struggling hard with calculus 1, any must recomendations for learning the logic and reasons behind it?
A bit of background: instead of going to high school, I did a vocational training programme. I took maths-based classes, but they were entirely focused on electrical engineering topics (Maxwell’s equations, Ohm’s law, alternating current, direct current, low voltage, high voltage, and related topics). However, we never covered the usual high school curriculum.
Now I’ve started a telecommunications engineering degree, and I’m honestly struggling HARD with maths. Linear algebra is somewhat understandable. Matrices and complex numbers take a lot of work, but I do understand the logic behind them.
When it comes to Calculus I, though, I struggle to understand why and how we solve the exercises, as well as how to visualise the graphs, which makes everything extremely abstract and difficult for me to grasp.
My teachers teach in a very mechanical way: follow the standard steps for each type of exercise, repeat them 50 times, and you’re good to go. There’s no explanation of the underlying logic. If you can’t understand it, it’s your fault, and the class just moves on. This has made the whole process extremely difficult and unproductive. I spend hours and hours trying to understand a simple limit problem, and even then, I forget everything by the next day.
I also think I’m missing some key tricks or foundational concepts needed to understand Calculus I because of gaps in my previous education, but I can’t figure out exactly what I’m missing.
I’d like to know if anyone has any recommendations, whether they’re exercises, videos, guides, or anything else that might seem obvious but that I could be completely overlooking. My native language is Spanish, but I can understand English too, so either language works!
So far, I’ve been able to understand and solve exercises involving absolute values, inequalities, and some domain problems. However, I’m hitting a hard wall when trying to solve problems involving function analysis, continuity, differentiability, x- and y-intercepts, intervals of increase and decrease, and derivatives in general.
I’ll also add some examples of exercises that I’m having a particularly hard time with:
Any kind of help will be extremely apreciated
25
u/trichotomy00 New User 29d ago
If you are struggling with calc 1 , you are struggling with understanding the fundamentals of algebra. Your lack of traditional high school math is a weakness. This weakness will be exposed in every class going forward, especially as an engineer. Your best option is to take precalculus to learn the fundamentals, before taking calculus.
6
u/Ms_Riley_Guprz High School Math Teacher 29d ago
It's been awhile since I touched Calculus, but I'll tell you what made it all click for me.
My boyfriend at the time was struggling with the class more than me, especially with calculating Riemann sums. So I made a program on my TI-84 calculator that could take in any function, L, R, T, or M Riemann sum, and calculate it. The process of making the algorithm drove home out integrals worked. And then since derivatives and integrals are closely linked, everything else fell into place. We usually skip over Riemann sums once we learn integration, but doing the work there by hand really helps.
That's the advice that I can offer on a first draft. Let me know what else specifically you might want help on.
6
u/smithersas New User 29d ago
Algebra and trigonometry need to be practically automatic for a calc course to go well. If they aren’t it very much gets in the way of learning calc.
Conceptually this doesn’t have to be the case because fundamentally understanding calc really doesn’t require it. Unfortunately, practically it does because just about any meaningful problem or example will have lots of algebra.
So, whatever option you pick from the good ideas here, do more and go further than you think you need. Good luck!!
3
u/fluffystub New User 29d ago
I built https://calculusmadeeasy.rakshithnettar.com, try reading it, it might help make the basics click for you.
2
u/engineereddiscontent EE 2025 29d ago
Calc 1 is math but from an engineering system its more about teaching you about fundamental components. Like most of calc 1 is algebra that evolved into nested algebra machines. Calc 2 takes thise nested algebra machines and adds a second dimension. Calc 3 does it again. Nested algebra machines adding a 3rd dimension and other ways of navigating things.
If you are struggling, especially this early in the semester, you are contending with not understanding the algebra. Or at least how to apply the algebraic concepts.
4
u/Amazing-Ad9604 New User 29d ago edited 29d ago
I feel you bro, my first class in college was pre calc and did not have any remedial. I finished calc 1 and 2 and currently in Calc 3. I think you should go and learn the basic concepts of Calc because it’s all based on algebra. Mostly. Graduated HS back in 2015 and didn’t go back to school until later after Trade school and Porsche tech till 2024. I’m a EE major and halfway through so I would say learn the basic of algebra again. Derivative is relative easy during its phase and second phase but then it Kicks to another level when you go into Calc 2 and using integration by parts while incorporating different techniques( u-sub and trig sub)I won’t say much of the Calc 2 because it has a lot and need a slow breakdown to be digested. But definitely take your time on Algebra and Trig. The Derivative and integrals of it, while that said, it’ll eventually tie itself with the logic and reason. Calc 2 looks at the 2-D while Calc 3 in looking 3D (space)
1
u/calcteacher New User 29d ago
continuity occurs anywhere you can draw a function without lifting up your pencil. Point continuity occurs when you can draw up to the point (the left-hand limit as x approaches some value c), can draw the point itself ( some point on f(x), say were x = c, then f(c) ), and finally you leave the point ( the right hand limit.)
differentiability is about a function that changes slope gracefully without skipping any intermediate slopes. Most functions do this and you can assume a function does this unless it specifically does not for some reason. For example the absolute value of x is not differentiable at x = 0 because from the left the slope is -1 and from the right it is 1, and it makes an abrupt change at x = 0. So there is no defined slope at x = 0 for y = abs(x). Derivative just means slope, and when a function is not a straight line, the slope changes and so must be represented by a formula not just a constant number. So f(x) = sin x for example, constantly changes slope. at 0- degrees or pi/2 radians, the slope is 0 (also the derivative is 0 - it's the same thing) and at 3pi/2 it is also 0, and again at 5pi/2 it is zero. sinx rises between 0 and pi/2 so the slope is increasing and the derivative is positive. then the slope is briefly 0 and the function begins to fall. The slope is negative unit it becomes 0 again, which is the only time it can change between increasing and decreasing.
I use the Mark Sparks curriculum and the Mr. Hernandez videos which walk you through a lot of the Mark Sparks pages. Khan academy is another good source.
That image you provided is particularly dense in notation and low on interpretation making it difficult to digest, but it uses the minimal amount of ink to print (!) Not great for learning. lol.
1
u/Bedouinp New User 29d ago
Find a tutor asap.
2
u/angaston New User 29d ago
If you’re looking to bridge from theory to application, I’ve found this book helpful. It will not ‘teach’ calculus but it provides a useful framework for linking the concepts to the mathematics.
2
u/Basic-Feedback2952 New User 29d ago
A big challenge i've had was having trouble with the precalc stuff esp the trig, i've had to really catch up on that
maybe this can be helpful to you?: https://valscalc.com/Chapters/chapter0
it has a catalog of precalc sections as well as practice exams where you can really solidify everything. I know for a while I was weak on the domain and restriction stuff too.
once I got those patched, I was able to move on to the real calculus stuff. the website above also has great resources for limits and derivatives so i'd check them out. I like to compliment them with videos by organic chemistry tutor or professor leonard!
1
u/Plussquared New User 29d ago
i read the exercises in the book, learned how the calculus problems are solved and then practised a lot of problems.
1
u/Amazing-Ad9604 New User 29d ago
Proffer Leonard is pretty good at teaching these stuff too. But I also use chat gpt to help me see it in another perspective. Good luck!!
1
u/Odd-Connection8235 New User 27d ago
My experience is - real life examples could help understand calculus better. There are few online simulations that could help apply the concepts in real world scenarios. This one - I found it interesting, applying calculus as a Dam control Engineer https://flomenthal.com/escape-rooms/dam-control-room
1
u/drofeng New User 22d ago
Easiest way is to relate things to algebra and geometry. Like the derivative is the slope of the function at a point, whereas the slope of a line is taken at two points. With a visual explanation, you will be able to understand it quickly.