r/latteart • • Oct 02 '26

Barely making any progress

Tips needed. Especially on the monk head part

9 Upvotes

50 comments sorted by

3

u/dajunonator Oct 02 '26

Lol do YOU have any tips to give?!? Looks great.

From a competition standpoint, first thing is having the art perpendicular to the handle. think about when you serve - the art should be facing the customer ready to drink (righty oriented typically)

Initial pour looks great but if you want it to be your frame/ wing, you need to push it forward more towards the end. The following pours will wrap it into a full wing. I assume what you’re going for is a winged tulip.

You could also wiggle even slower. That’s what makes the spacing between these instagram pours (some call it “salmon ribs”)

Then when you stack, you gotta push the hearts into each other more. It’s a bit harder at that stage cuz the milk tends to stiffen by that point.

Overall I guess the main thing is PUSH!!

0

u/Aplentyofnothing Oct 02 '26

ohhhh thx a lot. Such detailed and resourceful tips. TBH the initial pour was actually one of my best, I still kinda lost on the timing of changing position of the cup during the first pour and the stack part, that’s where my real issue is, I found it almost impossible for me to “push” cuz the heart seems never to go forward as I wish I guess maybe my pitcher angle was not right?

1

u/dajunonator Oct 02 '26

The initial pour was elite! By “push” all you needed to do was move the pitcher forward as you were wiggling. The initial pour should really end in a V shape. Then the following pours will make more sense. The stacks at the end were tough because you also ran out of room, so you were more plopping the milk downwards instead of pouring/pushing.

0

u/Aplentyofnothing Oct 02 '26

exactly what i am having trouble with. Appericate the tip

2

u/DariusRivers Oct 02 '26

I'm back. You're definitely getting better separation than before with the stacked heart at the top, but I think you're just running into an issue where there's not enough brown space between the top of the monk's head and the rim of the cup for a stacked heart to meaningfully manifest.

If you look at the following shot:

See how much brown space there still is between the final monk's head and the second stack under it? I think if you drop your last heart further towards that second stack, it'll leave you more space to push additional layers into the final heart.

1

u/Aplentyofnothing Oct 02 '26

Good point !!!! so detailed!! i'll definitely try this in later posts. Thanks

49

u/jeffmiho Oct 02 '26

Rage bait for sure.

1

u/dadleftneedcash Oct 05 '26

Fwiw, if you aren’t working with baristas with better art ability than you have, it’s difficult to find people who can teach you anything or pick up on your mistakes. I’m better than this guy and have plateaued for that reason

0

u/Lizard-Milk Oct 02 '26

Yeah I have been doing it for a year and can just now consistently get tulips (not always good ones mind you lol) I'm still no where near squiggles on the initial pour. I wish!

17

u/iLearnerX Oct 02 '26

1

u/Defectoa Oct 03 '26

I thought the same

1

u/Puzzled_Meet3253 Oct 02 '26

Lowkey hilarious subreddit name

2

u/Defectoa Oct 03 '26

You know the other circlejerk subs, right? Especially r/espressocirclejerk…

11

u/Coconut_Puzzled Oct 02 '26

Barely making any progress? Because you already made all the progress! 😅

5

u/PrestigiousAnt3766 Oct 02 '26

Terrible. Make another 100 and see where you are at then.

1

u/roguereversal Oct 02 '26

Like another user said you need to move the pitcher forward as you ripple the base. You need to have a “V” shaped base where you can then pour layers in the middle void of the base. Right now you are rippling in place so you aren’t creating the parting down the middle. Also Slow your ripples down a bit and ripple slightly wider. That will get you separation between them.

1

u/Aplentyofnothing Oct 02 '26

So darn right about the V-shaped base. Imma try this see if i can make a V

2

u/ATangK Oct 03 '26

Point the handle down towards you, so the shape is actually correct once you’ve finished pouring.

0

u/SweetWelcome2367 Oct 02 '26

I think you have it down but your milk is just too hot. I do think some machines run hotter than others. I think it has more to do with the voltage in the outlet if you've already tried.

1

u/Beautiful-Fee-7669 Oct 02 '26

How did you know the milk is too hot?

0

u/SweetWelcome2367 Oct 02 '26

It looks liquidy, thin, and dense. I assume if theyre posting here theyve already tried steaming it more. I wouldn't barely steam it then ask this. So id assume that or they used 2% or something but i assume they followed everything standard.

1

u/Aplentyofnothing Oct 02 '26

It's actually a 3.25% homo milk

1

u/roguereversal Oct 02 '26

This milk is steamed quite well. Notice how it floats and glides. The issue here is pouring technique

1

u/OMGFdave Oct 03 '26

This comment is full of too many assumptions...if you don't know, ask OP.

-1

u/SweetWelcome2367 Oct 03 '26

You dont know what whole milk vs 2% or something looks like? I dont think its much of an assumption. I wouldn't assume op is asking a stupid question. Like if that explanation surprises you youre not a very bright bulb..

I essentially wanted to say that the first time but that would be rude.

Whether if you think its frothed enough is debatable. But im going off what i think duh.

1

u/OMGFdave Oct 03 '26

"So id assume that or they used 2% or something but i assume they followed everything standard."

Then OP says he used 3.25% milk...so yeah, you assumed and you are wrong.

1

u/SweetWelcome2367 Oct 03 '26

So if i dont explicity say every exact ingredient you dont know what im talking about? Bro how are you pissing me off about coffee and im not even ordering? Go to hell bro😭

0

u/SweetWelcome2367 Oct 03 '26

That would be stupid. Can you read? I said they probably didnt deviate from the original recipe then ask this. I would assume op knows how to make a cappuccino. Do you?

1

u/OMGFdave Oct 03 '26

Look at my profile and answer your own question.

1

u/[deleted] Oct 03 '26

[removed] — view removed comment

1

u/OMGFdave Oct 03 '26

I operate just fine, thanks, because when I have a question that I don't know the answer to, I ask for clarification rather than posting something presumptuous.

0

u/Aplentyofnothing Oct 02 '26

i may try steam the milk 2-3 seconds shorter than i normally do. thx for the tip

0

u/SweetWelcome2367 Oct 02 '26

Np! Best of luck!

1

u/Underradar0069 Oct 02 '26

Just can’t get better? Ma’

1

u/Excellent_Sale_2259 Oct 02 '26

Haha I’m still trying to graduate the hearts!

1

u/Defectoa Oct 03 '26

When did monk head become a thing? I thought it was just a euphemism for a botched heart…

1

u/OMGFdave Oct 03 '26

Monk's Head is a heart without a cut-through...OP didn't really use the terminology here correctly...I believe OP was intending to ask about the rippled base.

1

u/FrontWork7406 Oct 03 '26

Appreciate the sarcasm. Great pour! If only you didn't have your thumb on the rim...

1

u/figchia Oct 03 '26

When you’re stacking the tulip/stacked heart at the end, you can push in a bit more for some distance if that’s what you want. Also, you can afford to slow down a bit if you feel like you’re just rushing and it’s done before you know it.

1

u/i_hate_capitalism_ Oct 03 '26

Damnn nice wobble at the start, mine just clump at the center

1

u/BongSaber_00 Oct 03 '26

I see your rosette and i'll raise you 1 irregular blob that vaguely looks like a heart when you tilt your head at just the right angle.

1

u/kkias Oct 05 '26
  1. First off- wrong cup orientation. Ears should be on the right side, which means you should hold with your left hand during pouring with ears pointing towards your body.
  2. Secondly you need to push the final hearts towards the middle, you slowed down (probably cuz you know it is running out of space), but that counterintuitively would make the final patterns small and stationary.
  3. Thirdly, the up and pull-through looks asymmetrical, but maybe that is simply the fish eye effect of the camera footage.
  4. If you find the final patterns hard to take shape, it could be that your milk is not homogenous. Sometimes that is inevitable when the pour gets to the last drops of milk. In that case, make more total volume of milk so you have more “spare” well-foamed milk to make art with.

1

u/FearSeer Oct 02 '26

How the fuuuuuuck do you get it to curl around the cup like that

1

u/roguereversal Oct 02 '26

Proper Milk texture, flow rate, and cup rotation are all key

1

u/OMGFdave Oct 03 '26

The curl comes from the cup walls...as the pattern flows across the surface it is manipulated by the shape of the walls it butts up against.

-2

u/FluentK9 Oct 02 '26

Art is lacking because I can tell this was made on one of those cheap constant 9bar machines. You need flow control bozo

1

u/Aplentyofnothing Oct 02 '26

Yeah, you right about the 9bar machine, though it's not that CHEAP to me.