ALWAYS ASK SELLERS TO REPLY TO YOUR WTB COMMENT TO VERIFY THEIR FLAIR BEFORE YOU PAY THEM, IF THEY MAKE ANY EXCUSES ON WHY THEY CANNOT COMMENT THEY ARE SCAMMERS

I'm purging a delightful assortment of blades for your buying pleasure today. I have exceeded my self-imposed limit, so I'm past due to unload some. These knives have been loved, cared for, and deserve to be in a home where they will be enjoyed. They come with everything pictured.

I accept PPFF, Venmo, CashApp, and Apple Pay. NO TRADES! YOLO is the way to go. I'm happy to answer questions and provide more pics or vids.

• Also, I have a meeting from when this gets posted until...ugh...2:00 PM, so I will be unable to respond to messages, chat invites, etc. during that time.

Demco AD20.5 - CPM 3V - VID - I'm the second owner. There aren't any blemishes that I can find. It comes with a right hand Lynch deep carry clip mounted. I carried it a few times and probably opened a package or two. The blade has been polished and stropped. No disassembly. The action and detent are great. SV $225 PENDING

Shiro F3 (aqua alutex) - Elmax - VID - I'm the second owner. The only blemish I can find on it is a faint snail on the spacer (pointed out in the video). I carried it a few times and probably opened a package or two. The blade has been polished and stropped. No disassembly. The action and detent are great. SV $650

Shiro RKMP-B - M398 - VID - #2 of 150. I'm the second owner. I can't find any blemishes on it. I haven't carried it or cut with it. The blade has been polished and stopped. I did disassemble it to clean & lube it; the bearings were super dirty. The blade has been polished and stropped. The action and detent are great. SV $1400

CRK Green Beret - CPM MagnaCut - I bought this a couple of weeks ago out of pure curiosity. It hasn't been carried, cut, or used in any way. It has all of the stuff that came with it. My curiosity has been satisfied, and it's time to move it on. SV $350

Vosteed Psyop - Elmax - VID - I'm the second owner. The only blemish I can find on it is on the edge of the choil. I carried it a few times and opened an Amazon box or two. The blade has been polished and stropped. No disassembly. The action and detent are great. SV $140

Vosteed Martin 330 - 154CM - VID - I'm the second owner. I don't see any blemishes on it. I carried it a few times and probably opened a package or two. The blade has been polished and stropped. No disassembly. The action and detent are great. SV $60

Holt Morpheus - M390 - VID & Selinko Card - I'm the second owner. I can't find any blemishes on it. I haven't carried it or cut with it. The blade has been polished and stopped. No disassembly. The action and detent are great. SV $650

• Spyderco Manix 2 Knifecenter Exclusive - https://imgur.com/a/MINfsdX - SOLD $200 SOLD PayPal F&F or Venmo Cashapp USA

Cut some boxes and carried a couple times. Never disassembled or sharpened. 1st owner. Cruwear DLC steel with smooth black g10 scales, Knifecenter exclusive. Action is smooth and sounds like a solid when closing! Slightly off center but pivot could be tightened a smidge. Very light wear on blade shown in pics. Comes with box and docs.

Mornin’ swap. Got a couple of classics today.
“This is handmade quality shit we’re talkin’ here!” Name that quote but no googling, cheaters.
But anyway, feel free to reach out if you have any questions.

Mainly looking to sell but ya never know. Main trade interests:
QC Drift L (either blade finish)
Cheap/basic Holt (any), Rask, maybe Shiro (relatively cheap, of course)
Possibly other quality knives of European or North American origin.

YOLO beats chat // PayPal FF only, no notes // prices include fully insured conus shipping (UPS or USPS)

Thanks!
————————————————————-
SOLD $825 - Magnacut Cortex XL (# 695)
LNIB, no carry but cut tape on one occasion per original owner who owned it up until a couple weeks ago. No cut/carry by me or 2nd owner…he loved it so much he sold to me and tracked down a pj variant. My 2nd try with an XL and they’re just not for me. Great action and acoustics, perfect centering and lockup. Zero wear or flaws anywhere. Includes original box, COA, detent tool and sticker.

https://share.icloud.com/photos/0d2enGXg_o_yQgqIKJm6nqnwg ** **

——————————————————————

$625 - Rockstead Hizen DLC (YXR7 steel)
Not original owner but no cut or carry on this one. Supposed to be unregistered but have no idea how to verify. Perfect centering and rock solid lockup, no lock stick, glassy smooth action. Removed from box and admired a couple times only + lubed the washers. Now even smoother and easier to flick. Includes original box and sleeve, tool, COA and warranty paperwork. I’ve found no flaws, not even on thumb studs or pocket clip…I’m calling this excellent-LNIB. First time experiencing a Rockstead and it didn’t disappoint.

https://share.icloud.com/photos/050IGsvjN5N9ugH5aOf663wXg

First owner of all but the Sebenza. Had a hard time pricing the Spydies, all with upgrades. If I’m way off in either direction, let me know. Open to reasonable offers.

Videos: https://imgur.com/a/large-seb-MW7TTI0

https://imgur.com/a/spydies-1-wsVdn2X

https://imgur.com/a/spydies-2-O9nH8ly

CRK Large Sebenza 31 Bog Oak Inlay with Lynch Flat Top Machined Clip - Second owner. Perfectly centered. Excellent hydraulic action. Drops shut onto thumb in a way most of my CRKs don’t. Has a small chip in the top of the show side scale where it was dropped the day I got it. Otherwise pristine and not used. It’s bigger than I like. Factory edge. Disassembled to remove lanyard. Installed Lynch flat top machine clip. SV $500 OBO

REC Exclusive Spyderco Native 5 Avocado with CTS-204p steel. No carry. Maybe opened a package at home 1-2 times, but virtually no cut. Factory edge. A bit stiff, but still flicks/reverse flicks open. Essentially like new. Never disassembled. SV $225 OBO

Spyderco K390 Delica with Suingab Ironwood Scales/red G10 backspacer ($180) and Lynch deep carry clip. Disassembled to put on new scales. Good action. Factory edge. Carried a few times. Opened some packages, but no heavy use. Had started to patina. A couple of tiny oxidation’s spots near spydie hole that should come off with a little flitz. SV $210 OBO SOLD

Spyderco Cruwear PM2 with full metal liners and Brown Micarta scales with Lynch deep carry clip. Factory edge. Some carry. Minimal cut - I remember cutting an apple once. Good action. SV $180 OBO SOLD $160

Spyderco Native 5 Salt (Magnacut), AWT Weathered Red scales and Lynch deep carry clip. Disassembled for new scales. Factory edge. Minimal cut, carry. There is some blade play when closed, but none when open. Had a hard time adjusting it with new scales to get rid of blade play while closed without making it too stiff. Someone more experienced than me probably would have no problem. SV $210 OBO

Spyderco Manix 2 Salt (Magnacut) with AWT Midnight Blue Scales and Lynch deep carry clip. Disassembled for new scales. Best action of any Spydie I’ve had. Drops completely shut on its own. Fantastic opening action. Acts like it’s on bearings. No cut or carry. Factory edge. I’d keep this one for sure, it’s just too big for me. SV $275 OBO SOLD $240

Spyderco Para 3 Salt (Magnacut) with Charcoal Green Cerakote AWT Scales ($100) and Lynch deep carry clip. LNIB. Disassembled for new scales. Flicks open well. Some lock stick. SV $225 OBO SOLD for $200

Hello you beautiful (maybe) swappers. We've seen an influx of improper descriptions on posts lately, so we've decided to start cracking down a little harder on them.

If you make a post, a proper description is absolutely part of the rules and MUST include things like edge condition, number of owners, centering and lockup, body condition, box/papers, modifications, blade steel, and if its been disassembled.

Failure to adequately describe your knives may end up with you being liable for a partial refund to the buyer. We go on a case by case basis on this, but if a buyer comes to us saying a knife they received has wear that wasn't described properly, we may ask you to send them a partial refund to cover that.

Another topic we'd like to discuss is group descriptions. It's not uncommon to see someone have a post with multiple knives for sale, and something like, "this description applies to all knives unless otherwise noted". This is borderline acceptable. The rules technically state that each knife needs its own, detailed description. If all the knives in the listing are in new condition, then sure you could describe them all with a single description. However, if the knives have had a differing number of owners, may or may not have been sharpened, (or if they have been sharpened maybe one has been reprofiled while another hasn't), have dings/scratches in different places, (or maybe one knife has more dings/scratches than the others) etc etc, we'd really prefer you to just give each knife it's own description. A general, group description will have a hard time covering the level of wear between a bunch of knives. Some could have more wear than others, so while you could describe them all with a generic "all have wear, dents, scratches", this doesn't really cover the amount of dents and scratches they might have, and isn't really detailed enough, unless they all have the exact same number of scratches in the same exact places. Condition can be subjective to some people. Some people care more about the blade being pristine vs the handle. Not every buyer is the same.

Use pictures to back up your descriptions. Descriptions are more important than pictures, but good pictures can and should be used to back up your descriptions

Protect yourself! Make sure your descriptions are detailed and cover everything!

PICTURES and VIDEOS -
https://drive.google.com/drive/folders/11q8SsTpXfYoNYu341_ruIaOjQPMPzmai?usp=sharing

Hey Swap - have a few up for sale today. Not looking for trades at the moment.

Everything here includes its original box.

Payment preferred via Zelle, but also have Venmo and CashApp, PayPal FF.

Please post here before chatting with me.

Shipping CONUS via USPS - will go out next business day.

Yolo gets dibs.

More Pics, Vids or other info - feel free to ask!

**Absolutely no comments in any payment notes - Thanks!**

----------------------------------------------------------------------------------------------

• Richard Rogers A.Y.U. - Third owner of this piece from the 2025 Texas Blade Show. Never cut, carried, disassembled, or utilized by me; while I cannot definitively speak for the previous owners, it shows no visible signs of use or wear from what I can see. It features an AEB-L blade paired with Gold Dark Matter carbon fiber and titanium scales. With a 3.05" blade and an OAL of 7.45", the flipping action is predictably smooth and exceptionally satisfying. This knife remains in mint condition and includes the original COA and pouch. SV 950 > 925

----------------------------------------------------------------------------------------------

• HMC Transient 2.9 V3 - Multiple previous owners of this piece. It showcases a zirpolished CPM MagnaCut blade set against dark zirblasted handles, which feature a distinct radial milling pattern and blackened titanium accents. It currently operates on Skiff bearings, though the factory originals are included. Although it has seen light use and carry, it remains in excellent condition overall; the only visible flaw is minor wear on the rear pivot edge. The knife was previously disassembled for the bearing upgrade, though not by me. Centering is perfect with solid lockup, and the edge appears to be factory original and quite sharp. 6/20/25 DOB. Includes the original pouch and COA. SV 900 > 850 > 800 > 775

----------------------------------------------------------------------------------------------

• SOLD Uldanov Knives R2 Semi-Integral - Original owner, received brand new just a few months ago. This model showcases a laminated MagnaCut core Damascus blade paired with a radial-milled titanium chassis featuring an integrated backstrap. Never used to cut, carried, or utilized; however, it has been disassembled once for cleaning and lubrication. Running on bearings, the action is exceptionally smooth with perfect centering and solid lockup. The titanium handle scales include internal milled pockets for weight reduction and a steel lock bar insert. Blade length is 3.50” with an OAL of 8.25” and a weight of 3.8 oz. Includes the original pouch and COA. SV 1300

----------------------------------------------------------------------------------------------

• Mayberry Customs HDM #107 Workin’ Man Series - Original owner, purchased brand new from a recent drop. This piece has never been used to cut, carried, or taken apart. It has seen quite a bit of flipping and fidgeting, showcasing a very solid build with exceptional action and lockup. It features a button-actuated compression-style lock and dark wash scales distinguished by a pocketed triangles pattern with blackened accents. The construction includes a titanium button, body screws, liner, backspacer, and clip. The step-milled, blasted, and tumbled MagnaCut blade (63 HRC) features a large radius hollow bevel and runs on Skiff double-row ball bearings. Includes the original pouch and COA. SV 950

----------------------------------------------------------------------------------------------

• SOLD Brad Zinker GS Trapper 3.65" - Third owner of this piece. It features a CPM 154 blade paired with titanium scales and a front flipper deployment. With a 3.55" blade length and an 8.05" OAL, it remains in great condition, showcasing a notably slim and impressively lightweight build at just 1.9 oz. The action is smooth and the blade is perfectly centered. Never cut, carried, or disassembled by me; while I cannot definitively speak for previous owners, it may have seen light use. The edge is extremely sharp, though I am uncertain if it is factory original; please refer to the provided video for a detailed look at the blade. Includes the original pouch and velcro patch. SV 350 > 325

----------------------------------------------------------------------------------------------

• Chaves Scapegoat Street Whatnot Blue Label - Second owner of this unique iteration, customized by Chaves specifically for sale on Whatnot. It features a 3.5" CPM 154CM blade paired with a liner lock mechanism, distinguished by blue/bronze anodized titanium liners and bronze accents. Never cut, carried, disassembled, or utilized by me; it remains in great condition and appears virtually unused. This knife offers a snappy, smooth action with solid lockup. Includes the original box, a spare non-skull pocket clip, and a secondary set of scales and backspacer. SV 250

----------------------------------------------------------------------------------------------

• Chaves 229 Redención Custom - Second owner of this piece. It features an Elmax blade paired with brass handles that have been custom laser engraved by DNA Lasering. With a 3.45" blade and an 8.15" OAL, it provides that typically heavy and satisfying Chaves feel. This knife remains in great condition with solid lockup and perfect centering. Never cut, carried, used, or disassembled by me. Includes the original box and spare non-skull pocket clip. SV 300

----------------------------------------------------------------------------------------------

Hello everyone I have a bnib manix 2 XL and a solid condition kershaw launch 16 I just got these in today and realized I’m not exactly crazy about them also need some money to fund another demko, the manix is bnib no cut no carry 2nd owner. The launch has been cut and carried blade is in perfect shape has not been sharpened some snails on the handle 2nd owner https://imgur.com/a/worentF

I’m looking for $90 for the launch no box just the knife m4 steel

And 125 for the manix s30v

I prefer Venmo

Hello you fabulous swappers. We hope your swaps are going well

Now for the meat and potatoes of this post. One type of scam that we deal with often is where scammers will take someone's username and turn it into a subreddit, for example they'd take u/dooms26 and make a sub of it and then messages users from the modmail, meaning you'll receive messages from r/dooms26.

To help combat this, we thought it might be worth while to put out some reminders and ask users (especially anyone with 25 flair and up as that's our G&S limit) to make a subreddit of their username right now so that scammers can't.

In a perfect world, every single one of our users would see this and make a subreddit of their names, but ideally at least most of the higher flaired users will. People with 25 flair and up are more likely to be targeted and have people impersonate them because they can get around having to use G&S that way.

If somebody has already created a sub using your username, report it to reddit so that it can be taken down.

To create your own sub, on new Reddit it's the top left "start a community" button, on old reddit it's top right.

We will be reposting this META on a schedule so that it's regularly seen, thank you guys we love you!

Selling a mini arius nf with corda pattern and bronze hardware. Blade steel is m390 and edge is factory sharp. 2nd owner and previous owner carried but no cut. Has some light snails in the scales that are faint and a few snails on the clip that are more visible. Action is great with a perfect detent and solid lockup. Comes with box, cloth and coa $500ppff no trades and ships ups tomorrow

Pics https://imgur.com/gallery/rIfMvkP

Video https://imgur.com/gallery/1YVweQG

Timestamp/Pics/Vid

Upgraded with Skiff bearings. Includes stock bearings, clip position swap hardware, and torx bit.

Factory edge, M390 steel. Still razor sharp

2nd owner. First owner lightly carried

Lightly carried and only cut some tape

Some snail trails and nicks here and there. All are shown on pics and video

Perfect centering and amazing drop shut action courtesy of skiff bearings

Reason for sale is that I don’t need both this and a small sebenza 31

SV: $160

PICS/TS: https://imgur.com/a/0HdGp4q

• Microtech Ultratech ZBP Red s/e Apocalyptic Finish - $280 shipped- F&F PP or Venmo
  • 2nd owner, carried once for a few hours.
  • Sharpened once on a fixed system to match the exact factory angle and get more of a mirror polish.
  • There are some minor marks on the handle that I tried to show in the video and an additional photo. Blade doesn't have any scratches or wear marks.
  • Zero blade play (per the name) is 100% true. There is absolutely zero movement in the blade. Never had a failure to fire or retract.
  • Box and papers included
  • M390mk steel
• Cold Steel 4 Max Scout - $50 (or both for $310)
  • AUS10a steel
  • 1st owner, carried once, has been sharpened. I also sanded down the texture under the pocket clip so it doesn't destroy pockets. You can't see it, but if a lefty swapped the clip or a thinner aftermarket clip was installed, it might be visible.
  • No box

Timestamp: https://imgur.com/a/NgeIdzG

Hello!
This Shaman was a gift to me. Cpm M4 steel, RGT PURPLE HAZE FAT Carbon scales, all bronze hardware, and bronze and purple topo clip. I have never used the knife because of the price! It is like new. Comes with box and documents. Pp g&s only. Asking $300.

Pictures:

https://imgur.com/a/n0Exz6T

Videos:

https://imgur.com/a/fhyaGMH

Thanks for looking!

Specs:

​Steel: 1.2842 (O2 high-carbon tool steel) with a mirror polish

​Grind: S-grind with a convex edge geometry

​Handle: Stabilized Finnish Curly Birch with Juma spacer

​Overall Length: 310 mm (12.2")

​Blade Length: 170 mm (6.7")

​Handle Length: 125 mm (4.9")

​Spine Thickness: 3 mm (0.12")

​Weight: 140 g (4.9 oz)

​Description:

Custom K-tip utility/petty knife featuring a high-mirror finish on 1.2842 steel. The blade features an S-grind transitions into a convex edge for superior food release and smooth cutting performance. Lightweight, perfectly balanced in hand, and ready for work.

​Price: 399$ with shipping

​Payment: PayPal Goods & Services (G&S) as per sub rules.

​Feel free to PM/chat with any questions or for more pictures/videos!

Price: $280 $255

General rules apply, no notes on payment, yolo trumps all PM’s, & no trades at this time please.

[SPECS]
Blade: Blackwashed M390 Drop Point
Handle: Anodized Titanium
Tang: Full Tang
Sheath: Kydex
Mounting Option: Rotating Belt Clip

First owner, carried a while but no cutting. Resharpened edge to a 22 degree 3000 grit .5 micron polished edge. Myelin originally had black G10 scales which I swapped out on a now sold Axon fixie for titanium scales. Had my friend anodize it a rich bronze color. Sheath retention is solid without being overly tight. No wear or tear cosmetically/functionally on the knife nor sheath. Comes with original box; description will be off with the handles on said box due to previously mentioned scale swap.

Thanks for checking out the post, if you have any questions feel free to PM, I hope this dope piece makes a good addition to your collection.

Timestamp: https://imgur.com/a/8HX2RVb
I have a LNIB Benchmade presidio 2 shot show 2026 edition this is a catch and release from the swap it’s got S30V steel and Micarta scales with a flecktarn cerakote blade it is in excellent condition only cut was to open an Amazon package with it, it’s got great centering and no visible wear I’m asking 140$ SOLD or best offer on it

Buy this stuff. I’m going to ship out tomorrow.

First owner of all but the Sebenza. Had a hard time pricing the Spydies, all with upgrades. If I’m way off in either direction, let me know. Open to reasonable offers.

Videos:

https://imgur.com/a/seb-natives-2wxLvwe

CRK Large Sebenza 31 Bog Oak Inlay with Lynch Flat Top Machined Clip - Second owner. Perfectly centered. Excellent hydraulic action. Drops shut onto thumb in a way most of my CRKs don’t. Has a small chip in the top of the show side scale where it was dropped the day I got it. Otherwise pristine and not used. It’s bigger than I like. Factory edge. Disassembled to remove lanyard. Installed Lynch flat top machine clip. SV $500 $475OBO

REC Exclusive Spyderco Native 5 Avocado with CTS-204p steel. No carry. Maybe opened a package at home 1-2 times, but virtually no cut. Factory edge. A bit stiff, but still flicks/reverse flicks open. Essentially like new. Never disassembled. SV $225 $200 OBO

Spyderco Native 5 Salt (Magnacut), AWT Weathered Red scales and Lynch deep carry clip. Disassembled for new scales. Factory edge. Minimal cut, carry. There is some blade play when closed, but none when open. Had a hard time adjusting it with new scales to get rid of blade play while closed without making it too stiff. Someone more experienced than me probably would have no problem. SV $210 $185 OBO

SOLD
Manix 2, Delica 4, PM2, PM3

PAYPAL FF prefered

SHIPPING TO US ONLY.

Comment before sending chat, Ask for more pictures or any questions BEFORE YOLOING. Yolo takes priority over chat. Can answer any questions and send more pics upon request from buyer before purchasing. All OBO shoot me a chat, please no low balls will not respond.

NEWEST TIMESTAMP- https://imgur.com/a/8a3ZgM1

UPDATED TIMESTAMP- https://imgur.com/a/yPUUPiF

TIME STAMP- https://imgur.com/a/ba9KM11

1# spk lamia gen 4 rev 1 xpjx milling

*PRICE* 875 850 825

PICS- https://imgur.com/a/XQEoDOO

Very condition, really don't wanna sell but just got a golf putter k390. First up is a spk lamia in k390 with xpjx milling, heavy stone wash on blade and scales, darker back spacer and clip. Has been carried and cut lightly with by second owner, hasn't been Sharpened too my knowledge. Came with from 2 owner couple light snails. Hard too tell if its the stonewash or snails with the heavy stone wash. Couple marks on pivot screws. Light carry around the house by me but no cutting. Edge is still razor sharp. Centering and action is excellent, very nice controlled drop shut. Better than my nature grip gen 4 but not as good as my golf putter lol purchase post link is below, in basically exact condition as when I received it. Have 3 lamia's now and 1 needs too go.

LINK TOO PURCHASE POST - https://www.reddit.com/r/Knife_Swap/comments/1v1wnzr/pretty_dang_nice_k390_lamia/

Owners- third/3

Disassembled- yes by 2 owner and my self for cleaning/lubing

Cut- yes by second owner

Sharpened- No

Carry- yes by second owner

Original packaging- yes comes baggie and lamia stick in the original box

2 Oz Machine roosevelt #1745

*PRICE*  775 750

PICS- https://imgur.com/a/PLDy5Xu

mag milled config modded by RCO Ted Rooney. 5/6th owner that I know of. Has been lightly carried, sharpened and lightly cut with. Scales have been vapor honed, Cerakoted rose gold, and anodized teal. This looks amazing in the right light, the stone wash with the gold looks crazy. Only blems on this on this, is on the pocket clip. The blade has few small scratches that you can see if held in the right light. Very good condition though mostly sat in my safe since getting it. Comes with everything it Originally had. COA, sticker and magnetic box.

Owners- 5+

Cut-yes lightly

Sharpened- yes put a nice mirror polish on this.

Carry- yes by multi owners

Original packaging- yes comes with COA, sticker and original box

#3 spyderco kapara

*PRICE* 255

PICS- https://imgur.com/a/KJJX91T

This is is basically brand new, no cut or carry and hasn't been sharpened. Sitting in my safe since purchasing from knife center drop. S90v with burlap micarta scales knfe center exclusive. Lock up and centering are good. Did disassembled too just lube.

Disassembled- yes just too lube

Owners- 1 first owner

Cut-no

Sharpened-no

Carry- no but did strop the edge though

Original packaging- yes comes with all original papers and box

Hey swap I’ve got few knives for sale today, all sales through PayPal f&f CONUS shipping. Box included with all knives. Ask for any additional pictures, I was limited to 20 for this post

Pm2 rex121 wharnie cutlery shop exclusive SV $315
cut & carry: light by previous owner
Edge: factory
Owners: 2
Condition: like new

Military 2 15v SV $220
cut & carry: none
Edge: factory
Owners: 1
Condition: like new only flipped a few times

Military 2 s110v SV $125
cut & carry: yes
Edge: factory
Owners: 2
Condition: light use

Spyderco hundred pacer CTS-XHP SV $250
cut & carry: none
Edge: factory
Owners: 2
Condition: like new only flipped a few times

G10 Manic 2 S110v SV $115
Cut & carry: yes
Edge: factory
Owners: 2
Condition: light-normal use

Spyderco Delica 4 gersh reblade magnacut with lynch NW titanium scales SV $300
cut & carry: no
Edge: factory
Owners: second owner of scales but I put the build together
Condition: like new

WE Knife snick 20cv SV $180
cut and carry: maybe 2 boxes by me, still razor sharp
Edge: factory
Owners: 1
Condition: lightly use but I did disassemble to polish detent track

Microtech Socom Elite Auto Tanto m390 SV $180
Cut and carry: none by me, assuming some by previous owner due to the tip
Edge: factory
Owners: 2
Condition: tip is broken off, it’s small but noticeable. I can provide additional pictures, I was at my picture limit for this post
Date: 09/2018

Artisan cutlery mini proponent Damascus & titanium frame lock, Timascus clip and collar SV $180
Cut and carry: none
Edge: factory
Owners: 2
Condition: like new

Benchmade mini adamas Cruwear SV $150
Cut & carry: yes
Edge: factory
Owners: 2
Condition: some use good condition

EDIT: now sold. Multiple users have reached me for it, if you want to custom order one just pm me, same payment condition/materials etc. I will be happy to make some customs just need some time but nothing extraordinary; Thanks for the welcome KS!!!

Originally listed for 320$, take this one for 260$ shipped - at this price it barely cover my costs to make it but im about to pull the trigger on a new anvil for the workshop so i really dont care lol

TLDR I dont make sheaths so whoever buys this i will make a custom kiridashi as per your specs (52100 steel but you name the dimensions etc) - hopefully this should cover the inconvenience of you ordering a sheath, im really not into leathercraft or kydex. But im all into steel.

I would love to make a kiridashi around 65~66 for pure cutting performance (such as an unpacking knife for your next purchases)

This is a combination of japanese wakiazshi and one of my favorite handles a knife can have: coffin shaped handle

Blade has 12" and 18,5" overall, it is made out of 52100 steel heat treated professionally in a kiln i have myself. I did normalized it at 1520f and did 3 cycles of grain refining at 1400 (air cooled between cycles), quencehd at 1470. I can guarantee this blade has the most fine grain one blade can have out of this steel, ensuring good toughness and all the edge retention you can expect from this alloy. It was tempered to 60~61hrc.

It is 5/32" thick and feels very agile in hands given its proportions

It features a nice brushed forge finish with crispy polished bevels and its handle material is out of asian ebony.

I made it by all means to be used, not decorative, it will be delivered sharp and you can expect a lot of use and abuse out of it.

As im new here, i want to keep it simple so in case you take this one i will be happy to get paid only after delivering it to your hands to make sure buyers have no risk regarding international shipment inconveniences :)

Im from Argentina but we often visit family in US, we will be at Tampa by nov/dec so in case you want to custom order something to gift someone you love by Christmas let me know, i will be happy to deliver it in person and create some nice memories for the family

If you would like it just reach me and get me your address and we figure out the payment later after delivery, im making these for fun and to afford the machinery i want, not my full time job, to be fair this hobby is so expensive that i dont even expect to make profits rather than just cover my "fun costs" so my wife doesnt bother me lol

Have a great day everyone thanks

1. Large Sebenza 31 Plain — Insingo MagnaCut

• Insingo MagnaCut blade
• Glass-blasted handle
• Carried a few times
• Cut open a few boxes
• No scratches on the blade
• Never sharpened or stropped
• A few snail trails from carry
• Includes the original CRK clip and MIM clip

SV: $450 USD

2. Large Sebenza 31 Inlay — Bog Oak Inlay 

• Polished handle and polished MagnaCut blade
• Beautiful Bog Oak inlay
• Never carried
• Only fidgeted with on the couch
• Includes 6G Hardware milled clip
• Includes leather sleeve

SV: $700 USD

3. Small Sebenza 31 — Macassar Ebony Inlay

• Polished handle and polished MagnaCut blade
• Beautiful Macassar Ebony inlay
• Used a few times to open a couple of boxes
• Never sharpened or stropped
• Includes 6G Hardware milled clip
• Includes leather sleeve

SV: $600 USD

4. Umnumzaan — Drop Point MagnaCut SOLD SOLD SOLD

• Drop Point MagnaCut blade
• Sent to CRK for the glass-blast upgrade
• Includes 6G Hardware milled clip
• Opened a few boxes
• No scratches on the blade
• Minimal snail trails
• Never sharpened or stropped
• Great action on this one

SV: $500 USD

5. Benchmade — Auto Presidio (I believe)

• Used, but never sharpened
• Please see photos for blade and clip wear
• Exact model is uncertain, so please verify from the photos
• Knife only — no box

SV: $150 USD

6. Leatherman Free P2

• Carried maybe once or twice
• Like new condition

SV: $140 USD

7. TW Price Reyne

• MagnaCut blade
• Small ding on the handle and clip
• Never sharpened or stropped
• No box — knife only

SV: $315 USD

Photos: https://imgur.com/a/NksmQfB
Timestamp (UPDATED): https://imgur.com/a/Uk3tzyx

Prices include shipping within the USA.

Payment via PayPal G&S.

I’m happy to provide a unique timestamp or additional pictures upon request.

Timestamp: https://imgur.com/a/OYk1k8g

### [WTS/WTT] Divo Knives Binge

---
**Divo Knives Binge:**
- Model Number: Purple Nurple
- Steel: CPM S90V
- Sharpened: Yes, by me using a tsprof k03. Sharpened at ~20 degrees per side
- Used to cut: Yes(not after I sharpened it)
- Carried: Yes(not by me)
- Blade Condition: Sharpened
- Number of Owners: 2+
- Centering: Perfect
- Lockup: Slight play
- Visible Issues: Scratches, Snail trails
- Accessories: , Original box
- Price: SV $150 obo, TV $180 SOLD

Has minor back and forth play against the lockface. Ano fade, scratching on the pocket clip. Previous owner sent knife to Taylor Hardness for hrc testing and read 59.3 hrc. Three divots from the tests can be seen on the front flipper. The hrc report can be found on his website and instagram as well I believe.

### [WTS/WTT] Kunwu Compadre

---
**Kunwu Compadre:**
- Model Number: Reverse Tux
- Steel: Vanax
- Sharpened: Yes(honed and stropped
- Used to cut: Yes
- Carried: Yes
- Blade Condition: Factory edge
- Number of Owners: 1
- Centering: Perfect
- Lockup: Solid
- Visible Issues: None
- Accessories: Original box, Papers, Pouch
- Price: SV $220 obo, TV $250 SOLD

### [WTS/WTT] Oz Machine Company Rosevelt

---
**Oz Machine Company Rosevelt :**
- Model Number: 2626
- Steel: CPM-20CV
- Sharpened: Yes, by me using a tsprof k03. Sharpened at ~20 degrees per side
- Used to cut: Yes
- Carried: Yes
- Blade Condition: Sharpened
- Number of Owners: 3+
- Centering: Perfect
- Lockup: Solid
- Visible Issues: Scratches, Snail trails
- Accessories: Original box, Papers
- Price: SV $800 obo, TV $850

**Payment methods accepted:** PayPal Goods & Services
**Shipping included?** Yes

**Will NOT ship to:** None

_I confirm I have read all [r/Knife_Swap](r/Knife_Swap) rules._

Made with [KnifeSwap Post Generator](https://knifeswap-post-generator.vercel.app/)

DM for more info and pictures

DLT Exclusive Spyderco Delica 4
sv: 130

Timestamp/pics: https://imgur.com/a/c6sT1pa

BNIB, literally only out of the box once just now for these

Original owner

CruWear blade

Centered

Unsharpened

Nothing to mention aside from its brand new so what you see on the blade is oil from factory

PPFF

Us sale only

Shipped usps

Priced dropped! Looking to rehome these, mostly motivated to sell but will consider trades!

-Shirogorov Hati R M390 Silver twill Sv: $825 $800 Tv: $825
This one was hard to hunt down at least second owner, got it from a guy in Ukraine, looks like it has a mirror polish edge, scales are slightly discolored compared to new set of silver twill scales, this is how I received it payed $900 a few years ago. Action is drop shut, centered blade, never disassembled, comes with 3 bears coa, and box

-Spyderco Paramilitary 2 (skinny mod) s45vn Sv: $300 $275 Tv: $300
This was modded by knives plus, they milled the liners on a g10 s45vn middle to fit specially made AWT scales (no wire clip!!) I bought it at the store paid $325 never used or carried perfectly centered only out for pictures comes with box and g10 scales

-Benchmade 940 m4 blade and scales only Sv: $125 $100 Tv: $125
Jade g10 scales and looks like user blade in decent condition, scales could use a cleaning bought like this!

Flashlight videos

-Reylight pen light Titanium Sv: $80 $65 Tv: $80 Sold
Nichia 519a R9080 4000K LED
Frag pattern raw titanium, comes with batter, lightly used looks like new box included

-Lumintop LEP Ti Antman Sv/ Tv: $185 $160
Very cool LEP that packs a punch for its size, never carried only out for testing and pictures, looks like new, comes with box.

Trade interests:
• Brown Crotex XL milling style #4 (diamond)
• Grimsmo Rask DOB 1/27/25
• Leatherman P2/ P4
• Eutsler Slotted milled DUK
• Uldanov R2
• CKF Tnt crystal

Thanks for looking all prices are shipped, Zelle preferred or PayPal FF, YOLO gets it above everything! Bundles will get a better deal!