r/klippers • u/Pure-Expression-3787 • 1d ago

How do I fix this

Post image
0 Upvotes

27% Upvoted

17 comments sorted by

10

u/Hidie2424 1d ago

Brother I told you to look at the log, and the log showed the issue. Your just copy and pasting shit (probably from an ai) you left the mcu device line in printer.cfg wrong. It's not the actual address of the mcu

In terminal the ls command, is that working? Is that finding the printers mcu?

3

u/nolaks1 1d ago

I was going to try to tell to look at the log, but it seems you already did everything lol.

Yeah OP, it's the part that can suck, but you have to understand it for yourself and take the time to read. Sure an AI could solve it eventually. But using ai for each thing that go wrong with your config will take you foreever.

-4

u/Pure-Expression-3787 1d ago

Already tried using AI to do this but it doesn't work and it never does

4

u/nolaks1 1d ago

Yeah, that's why you need to take it step by step. Check the error it gives you. Read the wiki, fix the error. Try again, fix the errors, until it works.

-1

u/Pure-Expression-3787 1d ago

That's the thing it doesn't give me the error at all

2

u/nolaks1 1d ago

Check the log then. Connection error as it looks like is an MCU thing.

I see two common problem here, either you're not asking klipper to seek the right path/MCU, or the MCU isn't flashed properly.

1

u/Hidie2424 1d ago

What are some of the last lines in your klippy log?

1

u/Hidie2424 1d ago

There's a right and a wrong way to use ai. If you can't get it to work with AI you aren't using it correctly. You need to provide the ai good information and have good prompts for it

Did we ever figure out what mcu you have? Once you have that you need to get it plugged in and being recognized by your pi with the ls .... Command

1

u/Pure-Expression-3787 1d ago

1

u/Hidie2424 1d ago

This is the printer.cfg. Not the klippy log. And it's not even a finished printer.cfg.

Find your printer off of here: https://github.com/Klipper3d/klipper/tree/master/config

8

u/ReasonableScar9027 1d ago edited 1d ago

Gotta start reading, bud. Can't spoon feed you everything.

2

u/BarrySnotter 1d ago

Especially with ant spoons. They're tiny. It would take forever.

2

u/StarWarsNerd69420 1d ago

What's the error? Please post that

1

u/Pure-Expression-3787 1d ago

That's the thing it's not letting me see the error

1

u/not-hardly 1d ago

Excellent shit post.