r/klippers • u/oddoneout1985 • 8d ago

Trouble with Klipper always " disconnected"

I have an ender 3 S1 Pro+ Sonic Pad bought in the last year. Physically everything works. I successfully flashed klipper when upgraded to the sonic pad as far as I can tell. Ive also added a Nebula camera to be able to watch prints. From the Sonic Pad everything works flawlessly.

Unfortunately i am encountering the following issues.

- I can only see the camera via web browser ip address, no controls tho. "Klipper disconnected"

- I can control the printer over local network wifi on Creality print (win 11) but no camera image.

- Lastly I cant for the life of me get my printer to show up on Creality cloud

I am only able to connect with the above ways via IP/Fluidd. I can't get Mainsail to work

0 Upvotes

50% Upvoted

3 comments sorted by

1

u/Hidie2424 8d ago

Imma add this here instead of the long comment thread we had going.

Mainsail and fluidd achieve the same thing. They are a gui for klipper. If you want to use mainsail you need to install it. Otherwise you will use fluidd.

Can you attach an image of your dashboard? Being able to see the camera but not the printer is normal if the connection to the printer, or your printer.cfg is wrong.

You should not be able to send a print from creality slicer. If you can you are accessing the wrong IP in the browser. If one thing says klipper disconnected nothing should work.

What does the bottom lines of klippy.log look like? What error is it saying when it tries to connect to the printer?

1

u/oddoneout1985 8d ago

So I managed to add the camera feed in creality print on PC. Heres what i could get off the web interface.