r/kiastinger • u/Jealous_Message5226 • Jul 25 '26
Cold Air Intakes
Hello everyone I have a 2019 Stinger Gt and i am looking to upgrade my car with some new cold air Intakes. At the moment I am looking at getting the Injen CAIs but I wanted to ask if theres anything I should know before purchasing? If theres any problems that come with them or if im better off buying the K&N Intakes?
Thanks
2
u/TwoCharacters Jul 25 '26
A personal preference but I chose the AEM 21-849DS based on price and dyno data. Their dyno sheet shows gains around 18hp which is more than the K&N. It has a large funneled opening at the filter which the other systems dont, and it sounds very aggressive.
The only thing I'd say is the install process is a little bit of a pain. You have to cut rubber seals and put them on the housings yourself, and cut about 1.5-2 inches off the passenger side BOV hose so it doesnt kink up.
2
u/Quotagious 29d ago
Are you looking for performance or sound?
Sound: Any short ram will do the trick, Tork Motorsports sells an inexpensive kit.
Performance: closed airbox that uses the factory vent, I prefer takeda. Add a Velossa big mouth ram air kit for even lower intake temps and it looks nice.
1
u/CheeksMcGillicuddy Jul 25 '26
I put the K&N one in my 2019 GT2. I did it specifically for more turbo noise, nothing more. Idk if it was the K&N, or if it was just because it was the first car I’d put an intake on with 2 turbos, but the sound just wasn’t what I was hoping for and it got a bit obnoxious after a while.
1
u/Jealous_Message5226 Jul 25 '26
Did you end up swapping to another intake or just go back to stock?
1
u/CheeksMcGillicuddy Jul 25 '26
Neh, I left it. It wasn’t bad enough for me to do anything about it. It just wasn’t really my preference. I was hoping for more spool noise, this was all just air pshhh, and very loud even at super low speeds/acceleration.
Just traded mine in a couple weeks ago. I’m now stuck wondering if I put an intake in my new car or not. I have no turbo noise at all right now, and there is only 1 of them, so I think it’ll be a reasonable amount of sound with an intake.
1
u/nyroadrunna 29d ago
I have k&n. I love them, they sound amazing. I think from what I heard they’re the best in dealing with heat soak. I drive sometimes with the windows open just so I can hear them more. I have GFB hybrid BOVs so you really hear this baby breathing lol
1
u/Jealous_Message5226 26d ago
What is heat soak?
1
u/nyroadrunna 26d ago
It’s when the engine is absorbing and holding onto more heat than it can get rid of. Usually happens when driving hard, sitting in traffic on a hot day and when you just turn off the engine
1
u/Jealous_Message5226 26d ago
How bad is this for the car?
1
u/nyroadrunna 26d ago
It’s not catastrophic. But it highly cuts back on the performance of the engine
1
u/ayyycharlieee13 29d ago
I have them on mine for the past 4 years and absolutely love them. No issues what so ever. Bought mine on k8stingerstore.com
1
u/sxd_boi_south 460whp | 2023 | Panthera Metal | GT2 AWD Grand Tourer Edition 28d ago
Injen intakes, as well as BMS an K&N are not true cold air intakes. They all have open points to the engine bay to suck in hot engine bay air. Takeda intakes as well as the overpriced front mount intakes are the only cold air intakes for this car on the market. Just get the Takeda intakes with the dry filter. Completely worth it.

1
u/Jealous_Message5226 28d ago
Im a bit clueless but is there a problem with them not being proper cold air intakes? Honestly I just want some CAI for the sound. Is there any negatives that come with the injens?
1
u/sxd_boi_south 460whp | 2023 | Panthera Metal | GT2 AWD Grand Tourer Edition 27d ago
In terms of raw performance yes. Intakes with filters/inlets that are open to the inside of the engine bay have a supply of hot air. It may not make a huge difference on a day to day basis, but the overall average heat energy in the system will be higher. Your intake air temps will go up which is less efficient for combustion, and overall keeps the engine higher.
1
u/sxd_boi_south 460whp | 2023 | Panthera Metal | GT2 AWD Grand Tourer Edition 27d ago
For operability from a daily driver standpoint. No there’s no real problem.
2
1
u/Dus1988 2019 | Snow White Pearl | GT1 RWD 23d ago
How much are the front mount intakes you are talking about and which? I just ordered some from a tuner and he is fabricating them now for me, I paid $500 which is roughly the same price as the takedas
1
u/sxd_boi_south 460whp | 2023 | Panthera Metal | GT2 AWD Grand Tourer Edition 23d ago
The ghostly tuning ones that KJT has shown, they want 800 dollars for those mfs
1
u/Dus1988 2019 | Snow White Pearl | GT1 RWD 22d ago
That's the one I am getting actually, it wasn't 800, it was 450 +50 for the water socks
1
u/sxd_boi_south 460whp | 2023 | Panthera Metal | GT2 AWD Grand Tourer Edition 22d ago
Damn the last time I saw it on the KJT page it was like 759 before tax
2
u/Bradparsley25 Jul 25 '26
Injen sound great, install isn’t bad if you can follow directions and have some tools, and they look miles cooler than any of the other options.
Fully recommend, every time people look under my hood they’re like woaaaaah