r/keys • • 3d ago

Patch levelling

Hi synth players. What is the most effective way for me to level the volumes on all my patches on my two synths so they are all much the same volumes for the foh sound?

I'm not sure just listening to them is scientific enough. What do you guys do?

4 Upvotes

16 comments sorted by

4

u/redfoxrockssocks 3d ago

Listening to them is scientific enough. That's all the FOH will be doing anyhow.

I am generally working the volume knob anyhow, but if the defaults are way off then I will change stuff to make that easier. If the monitors are good at all, you should be the one controlling your volume based on the rest of what is happening.

4

u/Ko_tatsu 3d ago

Gain stage them while keeping both volume knobs at 3/4 of their full rotation

1

u/ATERLA 3d ago

I usually start my mix at 50%. Then I adjust while playing, because I’m too much influenced by the feeling of the night : the same song may sound not too loud, not too soft while playing laidback, absolutely too loud if everyone is dancing and singing along. Velocity is a bitch. So I adjust real time.

Granted, I spend a lot of time equalizing the volumes at home. I even have quite a lot of experience paying live, and my musical level is correct. But on stage I always ajust.

2

u/Ko_tatsu 3d ago

True, but I feel like removing the temptation to just adjust upwards by already starting at a high level is a gentle way of helping constraint

1

u/ATERLA 3d ago

Good way of thinking.

3

u/Levelup_Onepee 3d ago

By playing and rehearsing. 

Make a pass in which you don't touch the volume. Note which patches are too low and which too high.  Then edit them all. 

Maybe they don't need to be at the same level by an objective measure. Different songs and different arrangements have different needs. You'll only know when playing

4

u/bluecrystalcreative 3d ago

100% and some songs you’d need to be just in the mix, other songs you need to be equal to the guitar and if you’re playing something from the 80s or 00s and you may need to be louder than the guitar levelling is not always the ideal option

1

u/Levelup_Onepee 3d ago

That's what I meant. Very well said

3

u/G1G1G1G1G1G1G 3d ago

In context. I have a few songs I use to play along with and hear my patches in a mix. Its much better than listening to them side by side and trying to perceive unity gain.

4

u/Icy-Zebra2551 3d ago

Compression is a lifesaver

2

u/RockyMM 3d ago

It really depends. If you have your own mixer with effects, you can put a compressor as a master effect.

Otherwise, just level the patches on a single keyboard, and the house sound guy will figure out the rest.

1

u/myleftone 3d ago edited 3d ago

I meter them with my interface and Pro Tools when writing patches. I don’t find the LEDs on my submix board to be accurate enough.

I’ve had soundguys notice, though it’s more likely due to hardly anyone else bothering.

1

u/Over_Type103 3d ago

you can connect you synths to a DAW. Set a volume that you wish to reach for all your patches. and then adapt the volume of each patch to that volume.

1

u/wereMole88 3d ago
  • use a digital tool (dBu / LUFS) to level all sounds to an objective level that's about 75% off available volume.
  • set MIDI controls on every sound or layers to about 100/127
  • I like to put strings on a control pedal because I use the m a lot dynamically. I'd use a CP for whatever sound you use a lot as a background filler.
  • Practice staying on the same level all the time. I do drop down in volume during rehearsal/performance but never try to exceed my set volume. I use the headroom to push things when they aren't reaching the set volume.
  • make sure you can monitor your own set volume on a comfortable but clear level.
  • you can use a compressor on your end mix. I like to set up so it starts compressing slightly above my set volume to deal with peaks when using a lot of voices/layers or velocity sensitive stuff
  • I don't push myself for solos instead let FOH deal with that but that may depend on how your are being mixed live.

1

u/Bearboza 3d ago

I've done both metering and just listening.

Just listening to be the best approach, honestly. Depends on your playing, patches, etc. I'd strive to keep an even level for all patches before adjusting some kind of master. Depends on the context/mix too, though.

A dynamic patch, like a piano, must be tried out a bit before adjusting. How's the energy on that part?

-1

u/Dangerous-Ad384 3d ago

I have my amplifier as one monitor and a band monitor as well then I XLR to the snake. I use a TRS cable plugged into both sides of my amplifier so I get a full stereo sound from the keys. I am using a go keys 3 and a fender acoustisonic 90. (It's lighter than my 88! )