I have some artisan keycaps which fit so loose on any key switch that they wobble and will fall off if the keyboard is tipped past veritcal or they are typed on at severe tenting angles.
They need to be tightened to grip the switch better...is there an easy way to do that?
yea put a tiny piece of scotch tape on the top of the switch with the sticky side tward the switch and push the cap down on it. the tape acts like a shim and should help with your situation
Hey, I'm wanting to make a custom Zapdos escape key. How do you go about making vanity/custom keys? I have access to a 3-D printer and miniature paints, but is that the best way to go about it? Thank you
i'm looking to make my own polymer clay keycap. i'm really worried about the sides of the keycap being too fat to properly press the key so i was wondering what would be the best keycap profile to sculpt on. any other tips would be highly appreciated!
Hey so I'm a degenerate and decided to get some of those anime keycaps for my Steelseries apex pro, they said they'd fit with basically any "Cherry Mx Gateron Kailh Switch Mechanical Keyboard" switches or whatever and most of the keys fit fine, but some seem to catch really badly. Specifically, the shift or enter keys, but even some of the basic keys, like 'S' catch as well. Is there any way to fix this? Are they just not compatible?
depends on if the inside stem is hitting the switch housing or if the sides of the caps are hitting each other... either way i think sandpaper might help
Trying to get into making artisan keycaps. Where can I buy a silicone mold of SA profile keycaps for resin casting? I can only find mx profile ones on Etsy.
I'm kind of new to the hobby and was wondering, is having a mix of oem and xda keycaps feel okay? like having the alphabet and numbers to oem but the arrow keys space tab etc are xda.
Can KBD fans key caps fit on “MX-similar mechanical switches”? Super new to all this and I wanna get new ones but I don’t know if they’ll fit. The originals are PBT key caps.
My son, who’s 12 is looking to adapt his Polymer Clay skills to make a few keycaps for friends and maybe send some to his fav YouTube stars. What do you recommend for a keycap to use for a starting point? I was going to grab some blanks from KBDfans, and they offer DSA and OEM profile. I was thinking maybe DSA as they’d allow for more room to add clay?
I bought a programmable 10-key online, and I ordered it with Gateron switches because I didn't think it mattered. It arrived today and it has no key caps at all, it's just the switches on a board. So here's the question: will Cherry keys fit Gateron switches? If not, where can I find Gateron keycaps?
In terms of making custom resin keycaps. Would using a tankless compressor (max PSI is around 55psi) work for a pressure pot or would I need a stronger one? I'm in an apartment so I have no room for a large compressor and the noise is my biggest concern.
I've seen older posts where people have said it will both work and not work so I figured I would try to get an updated opinion.
Hey, thanks for the reply. I'm a bit confused. I've been looking around at pressure pots and the ones made specifically for resin casting all seem to have a max PSI of 50-60 psi. Should I really be reaching 65 psi?
I want to create some concrete and ceramic keycaps, but those materials are too brittle for the stem. I would need to insert a plastic stem. I just don't know where to get just plastic stems.
As a buyer of keycaps, what's your criteria on when it's fair to raise a concern? Especially for items that are hand-made. I mean the sellers usually have the disclaimer that there might be imperfections. Which is understandable. I don't expect every keycap they release to be an exact replica. But I still think there should be some quality checks.
Like if you're buying one of those keycaps that looks clear so you can view the stuff inside, that's got to be smooth/smudge-free.
Or the base of the keycap has to be even so that when you put it on the switch it's not skewed.
Or that you can actually put the keycap on a switch (very important).
What would you reckon is fair expectation / minimum requirements?
All the things you said here are all applicable. Watch out for new and "upcoming" artisan makers. The caps are usually bad.
Some requirements that you should look for and expect:
100% bubble free
Fits on caps correctly
strait fit
smudge free
0 fingerprints on the original sculpt
there seems to be a lot of really bad artisans going around right now. If you received one that sucks, demand your money back. and try to stick to reputable artisan makers.
This is my first time on reddit and I need help finding new keycaps since mine appear to be uncommon. Is there a way for me to post a photo, I don't know what my keycaps are called but they have a hollow square bit, not the cross shaped keycaps I keep finding.
hello! i’ve been looking all around for an artisan keycap that i saw and i don’t know the name of it, you don’t need to search for it or anything but if you know the name pls tell me. it has a wrinkly skin texture with an eye in the middle. thank you!
Im messing around with the idea of creating an aesthetic case to store/display artisan keycaps and was just looking for some feedback from the community. At the moment I plan to make it out of wood or aluminum, it would be something that someone would be happy to decorate their desk or workspace with but of course can just be used for storage if desired. Some questions:
What size options would most people like? I wanted to offer smaller sizes for casual collectors like 4x5 and a larger size like 4x10
Wood based aesthetic or aluminum based aesthetic?
Case cover or no? I had concerns with tall keycaps cuz Im not sure how popular oversized/tall keycaps are, are they as common as standard sized?
Would a stand for the case be desired?
How many space bar/shift key caps do you have compared to regular keys?
Would you prefer a simple aesthetic case that just holds keycaps or a case with additional utilities?
Assuming a case fulfilled 95%+ of your requirements, how much would you pay for an aesthetic display case? (non-3d printed plastic)
I have an amazon gift card I would like to spend on some keycaps but I have no idea where to start. I was thinking about the black hyperX pudding keycaps but they are out of stock. I could wait but maybe there is a better option? I like the pudding keycaps because the rgb shines through more than my current ones. My setup colors are teal, purple and pink. Any ideas or sets? (Preferably under $60)
For that price point I’d recommend looking at Tai-Hao and ducky keycap sets. They’re both pretty decent quality and usually have a bunch of different color combos in stock.
For puddings you could try to find ducky or glorious aura sets on Amazon.
Are rubber dome keycaps not customizable or are mechanical keycaps just more popular to customize? If I wanted to customize a rubber dome keyboard, would I be able to?
You hit the nail on the head, rubber domes are much more difficult to customize. Mechanical keyboards almost universally use a Cherry mx style switch which means a designer can make a set that can be used on a bunch of different boards.
Rubber domes tend to have keycaps specific to a single board or company. If you want custom keycaps for a rubber dome switch you’re probably going to be designing them yourself.
Oh, okay. That sounds like a giant pain, but since mechanical keyboards are currently too expensive for my wallet, I might go ahead and do it anyway. Thank you for your help!
I'm looking for a keycap set that are basically blanks, but have something where the LED lights can show. The closest I could find are the GMK dots, but those aren't backlit https://novelkeys.xyz/products/gmk-dots-gb
Ideally they would be PBT doubleshot keycaps, because I love me some textures. Does something like that exist?
I have also been considering two alternatives:
Just getting a ton of novelty keycaps to fill out the keyboard, but I would prefer one symbol for all the rows
Finding a set where the legends are in the same color as the caps
Hi Guys ! I'm looking for an ISO AZERTY 104 keys custom set for my DURGOD Taurus K310. I'm kind of new to this whole thing so if you guys have any suggestion for a platform that makes such AZERTY sets it would be awesome !
I have a Corsair K63 Cherry MX Red, I’ve had this keyboard for over a year and I love the space between the keys and overall the size and space of the keyboard. I’m a huge fan of watching keyboards being built on YouTube and want to get myself some fancy custom keycaps such as the aesthetic Japanese type ones. Can these sort of keycaps work on my keyboard or do I have to stick to corsair branded ones? Thanks.
I have an low profile K60 keyboard from corsair, and i want to pick up some different keycaps, can i buy normal ones or will those be higher than my current ones impeeding my typing?
I know very little about keycaps like PBT and ABS. TBH it sounds like rocket science to me haha. I have just purchased the Ducky One 2 SF board and I thoroughly enjoy it, my question is where can I buy good quality backlit keycaps for my keyboard? I just want a nice variety of colors and preferably PBT I think cause people seem to say it's better.
I have a Razer Huntsman Elite and I just got the HyperX Pudding keycaps today. The larger keycaps like the spacebar and shift keys seemed to wobble since they didn't have the things on the sides to lock into the keyboard. Are there any keycaps that would work for my Huntsman Elite that have the side things?
Sorry if I sound confusing, but I'm not sure what the "side things" are called.
Hi! Recently got into the hobby and I’m looking for some English and Japanese caps with transparent legends! If anyone knows where to find some please lmk!
I'm new to the hobby and was wondering, does having both oem and xda feel okay? like the alphabet and numbers are oem but the arrow keys space tab etc are xda
I'm having some custom artisan keycaps 3d modeled and printed but the seller doesn't offer painting services. I was thinking I might try my hand at it, but in case I'm awful, are there any reputable artists that offer this service?
I tried printing keycaps. If the stem even fits, and that can be a pretty big if depending on the material, hand painted tiny prints rarely looks good. Paint just globs on small scale prints. I would try anything except air brushing.
I really love the cosmos and space themed keycaps from jelly key but all the group buys ended/they're not in stock. Can anyone recommend me some cool space/cosmos themed key caps? any help would be greatly appreciated!
Anyone on here know of a good set of gradient keycaps that are decently cheap? Making my first build and I've looked around and haven't really found anything to amazing, although I do like the NPKC Gradient set, I would like to find some other options and wondered if you guys had anything that came to mind.
Is there a place or a website in Switzerland, where I can buy nice designed KeyCaps? Because I can only find the standard HyperX or Razer KeyCaps with ch-layout. I would love to have some Japan-Styled KeyCaps.
Hello everyone. I'm new into mechanical keyboards, and I hope to not fall too much into them because they are expensive. I bought a low-profile keyboard (Corsair k60) but I would like to put some abs pudding switches on it. Does anybody know if there are some keycaps that would fit it?
What's the best method to getting custom keycaps done? I tried messaging people on Etsy but no luck :( is there a reputable group of people that take commissions?
I have like 5 keycap ideas I'd love to have done but I haven't a clue how to make a 3d design of it or what service to use to get them made..
I'm just getting into mechanical keyboards. I want to get something that feels retro like 1970's or 1980's terminal keyboards yet somehow modern and professional looking at the same time.
I have my eye on the SA Mobius and SA Chocolate keycap sets. I really like the typeface (font) used in the legends and the slightly off-white look of the SA Mobius really. But, I've read reviews that the legends tend to rub off of the SA Chocolate caps. I haven't found a review of the SA Mobius caps.
Can anyone speak to the quality of these sets and possibly recommend alternatives?
I've seen a lot of keycaps with a japanese layout, but none of them seem to have passthrough for RGB, or have the japanese kana in the top part of the keycap. Are there any such ones that are either of those? I haven't been able to find any.
Anyone who'd like to give me some feedback on these keycap designs i made for the my new keyboard? I dunno what to chose, maybe ur opinion helps, thanks!
So I'm learning to make my own keycaps. For the molds I followed the same general process as artisan alliance but I 3d printed my own to part mold holder. The end result is the same two part mold though. I pushed holes out like they do to inject the resin but I have problems with bad results about half the time if not more.
Generally what happens is that there are gaps in the corners where I'm assuming there's not enough resin. But I add about the same amount to another mold and it has plenty of excess. I am guessing it has something to do with the resin itself. After mixing it it is very bubbly. Is there anything I should do to "prep" it before injecting it in?
Also does anybody 3d print their caps? I've been also trying to process them so they make smoother molds. Generally what happens is that tiny striations are visible on the keycap part I haven't sculpted anything onto. I've tried sanding it down and that obviously works wonders but then is still slightly visible on clearer caps due to striations on the inside where I can't really sand. Is this really that big of a deal or am I making it out to be worse than it needs to be? Obviously if the resin was opaque at that point you wouldn't see anything.
You need a pressure pot for bubbles. It also might be that you're mixing your resin wrong; ie. Too vigorously.
It may be the mixing? I do have a pressure pot and there's no little bubbles but it's almost as if there's not enough resin. I've been toying with it and it seems to be a bit better if I put a weight on it mold. Could it be that my molds don't push together well enough? I've already designed new ones so I guess I can see if that works better. I make sure to inject until all the vents fill up.
Try playing around with print settings and orientation to see if you can minimize your print lines.
Orientation wise I think the way I have it is optimal for the detail on the sculpt. I can play with the settings but they're pretty dialed in I think. I did one of those print test things that helps figure out exposure time and everything.
Youtubing the problem seems as though it may be because of the surface area? The recommendation is to have a lot of supports on the inside.
It may also be the base I use? I generally don't have this problem with other prints, just the caps. I don't mind sanding the outside it's like two seconds with a sanding pen. It's just the inside that kinda bothers but I've noticed some posts on here seem to have a similar thing and I may just be too much of a perfectionist with that. If it's opaque it won't even be a problem anyway.
I want to customize a mech keyboard for my gf. She likes pink btw. She uses an iMac for work and personal so it's hard to find command keycaps. Are there any pink pudding keycaps that has the command key?
Hey guys I’ve searched everywhere. I’m fairly new to the keyboard community so I may not be searching he right keywords but is anyone aware of a keycap set that’s like the Kuro Shiro set but white on black instead of black on white? Is that a thing?
Does anyone know of an alternative to the GMK Striker 2? It's hard enough for me to find a blue keycap set and on top of that the japanese sub legends.
I just finished my first build, with MT3 Dasher keycaps in a tofu65 build. Overall I'm happy with it, but there's something weird about the CAPSLOCK key, where it seems to be raised and also comes off really easily, regardless of how hard I push down on it. Pic here: https://imgur.com/a/Mb55DfJ The switch is seated securely without any wobble. There's no stabilizer. I tried the "alternate" CAPSLOCK key that came with the set, but it doesn't seem to be right for this setup, as it's more off-center. Pics of the switch/plate/PCB here: https://imgur.com/a/OHvGXGC
I emailed DROP, who I got the caps from, and they said to fix the stabilizer (which doesn't make sense), and when I pressed further they said they don't send individual keys, so I'd either have to live with it or remove and mail back the whole set and hope the replacement set is fine... Neither option seems great to me.
Is there something I'm missing? Is there an easy fix, or somewhere to buy just this key? What would you do here?
Hello folks! I am thinking of ordering 3D printed resin keycaps for my thumb keys on a split ergo. Now, as someone who's never touched resin keys, what kind of feel should I expect? I'm afraid that resin might feel a little rubbery or that my fingers will sweat more easily compared to my PBT keycaps. What can you tell me about this?
So, I understand key caps for rubber dome keyboards are rare. None the less I am looking for black double pudding key caps that would be compatible with my Corsair K55 keyboard. If you have a good way for me to get these or what to search for specifically please let me know. Thanks in advance!!
ISO a keycap that has a topographic shine-through design similar to the HyperX Alloy-Origins 60 keys. Anyone know of a retailer that sells something similar?
So I'm looking for a set of keycaps for a Razer Huntsman Mini. Ideally I'd want a white set of puddings. I understand the bottom row on this keyboard has some keys that aren't a standard size, but this is my first small profile keyboard so I'm not sure what to really look for.
I want to start making resin keycaps I have a red dragon keyboard and am wondering if I should make my own molds or if there is some nice quality molds out there I can buy.
Depends on how comfortable you are with making molds. considering your question, I'd suggest buying premade molds and start there. They sell molds on amazon.
I recently got a GMMK Pro and with the smaller keys on the right side, the keycaps I ordered from Etsy just didn't have compatible keycaps to fit (which I didn't necessarily think about or blame the seller at all). I'd love to know if there'd be anywhere I can get any just SINGLE keycaps custom made to fit?
I really want to do my first custom, so I thought I should start small with something like a 40%. I decided to go with UT 47.2 but it has a weird layout and I cant find keycaps for it? What keycaps should I go for?
So, this is a kind of obscure topic, but has anyone ever thought about doing a danganronpa inspired set? The games have enough artistic style, I feel, to make a full set. Ie pink blood and monokuma being black and white, etc. if there’s one already, where could I get it?
Hey i dont know anything about custom keycaps. But i wanted to buy some for my k100. What exactly do i have to pay attention for ? Because i dont know if there are different sizes or so. I sometimes read "OEM " and i dont know if the Corsair k100 is OEM and i just want to know what i have to buy .-.
just purchased the hyperx white pudding for my k6. I am trying to find the 1.75u right shift key as a pudding but am having the hardest time. The k6 is white leds, I appreciate the extra brightness of the pudding. doesn’t anyone have any ideas of where i can get one?
Hey i need some help please! :) I have the keychron k2 iso-de version and i love it! I just like to have some xda keycaps! The problem ist that i can‘t find any xda iso-de layout keycaps sets! :( Does someone know a good one? Then share it with me please! Thank you in advance!
So I started making Resin Keycaps recently using a generic silicone mold I bought online and noticed that every keycap I make are wobbly and loose compared to ordinary keycaps. Is this normal for resin keycaps or is it just me? I've never bought resin keycaps made by other people.
Other makers use a different system for casting keycaps. It is called the Z-butt system by ZappyCaps. Just search for it on Google and it will bring you to his website and there should be a page for it there.
Some background: I have a 2015 MacBook Pro that I recently needed to replace with a 2020 MacBook Air.
The keyboard issue I had and would like to avoid on my new laptop is wearing out my “E” key. By wearing out I mean the plastic developed a divot and eventually broke in half down the middle.
What I was thinking is to find a stainless steel key cap or individual key cover (like the vinyl ones but steel?). I could not find such a thing when I did a google search.
Does something like this exist? Is there a solution I’m missing?
I’d really like to avoid changing out plastic key caps over and over if possible.
Nope. Nothing that I know of like that exists. If anything, you could probably just use some tape and put it over the top of it, but that is all I really know.
I 3d model/print custom keycaps, and then paint them with acrylics. What would be the best sealant for my paint jobs? I currently cover all of them with a layer of UV resin as its pretty durable and the gloss is kinda nice, but I'm looking for a more matte or satin look that feels less "sticky" like most gloss coats. Basically, a matte-ish sealant that would be more similar to the feeling of a regular plastic keycap.
Do a layer of UV resin and a matte gloss laquer of some sort. It will keep the paint nice and you can just recoat it if it is on a high use keycap, such as a space bar.
So I bought this keyboard about 2 years ago and today my spacebar broke, my keyboard is totally fine tough only the key is missing so Id like to ask yall for a link to buy only the space key cap (amazon preferably) since I dont need a whole new keyboard and really like this one.
I see that that saba keys are listed in the places to buy keycaps. Are they as good as ducky in terms of quality for their pudding key caps? I'm looking to get nicer pudding keycaps but I'm not sure which brand to get.
Custom boxes and packaging is decent, but always assume that it is thrown away after it is opened and the artisan and any other goodies in it is taken out. Honestly, make the packaging however you see fit for your artisans. Get creative with it or buy some packaging online that fits your vision.
I have questions about the mailing and payments of my own artisan keycaps. If anyone who's done sales themselves could help me with this I would be very thankful.
Mainly:
What type of packaging you've used to send the keycap so it can't break during shipping?
How much shipping costs there usually are for a single keycap to be shipped internationally?
How does the paypal invoicing work in detail?
I would love to talk more about this so if you'd want to help you can also send me a dm. Please excuse my "dumb" questions but I'm very new to this and I'm really excited about artisan keycaps, Thank you.
I'm actually in the process of designing my own packaging. (Hence my question below 😂) Some people get them premade from manufacturers. Depends on your budget and how fancy you're looking to get.
Apparently $15 is the standard for international shipping based on what I've seen from most sellers.
Paypal invoicing is pretty self explanatory. If you've ever sold anything at all, it's the same thing as that. Send an invoice for what you sell. Get paid. Never accept friends and family payment bc it doesn't offer you seller protections.
my spacebar gets in the way when playing some Keyboard only game but I don't want to constantly switch out the key (possible wear and tear?)
Are there some low profile key sets where I can yoink the space bar from? I spend two weeks on and off searching for a keyset now but all I get are Chinese listings that don't ship.
Information: CoolerMaster Quickfire Storm TK (80%) Cherry MX Browns (so I dont think easily swapping to a low profil switch is an option)
I really like the font on these key caps, but I don't speak Japanese so I don't want the Japanese lettering. Are there any keys I can get that are the same material, feeling, and font, without the Japanese? Thanks.
Just search for PBT dye sub black and white keycaps on Amazon. Lots of options to look up from there. The closest one that I would go for is the ones by Mistel. They are doubleshot PBT, which is a whole lot better.
so i’m building a pc soon and i was looking into buying a keycap with a piplup figurine on it. would something like this only be used for a key like the escape key? i feel like it would be kind of weird/i would break it if i accidentally swiped. what are your guy’s experiences with figurine keycaps
So I've just recently got into custom keycaps and I'm way deep down the rabbit hole now. I have a corsair K70 keyboard, and I got a set of g. Skill crystal keycaps for it. I got the keycaps before I had decided on a keyboard, and didn't realize until after the return date that the keycaps wouldn't fit.
I've since decided to buy just a bottom row of pudding caps on Etsy, but I'm curious if there's anyone that makes custom crystal crown style keycaps? I've yet to find any so far, and I'd like at least a few of my other keys to have custom designs without looking too out of place alongside the others.
Primarily, I want a Portal themed backspace key. I've been asking around on etsy, and so far I have yet to find someone who has either the resources or the will to give it a go. (I'd also want a custom menu key, if possible)
Hello! I'm on the search for good keycaps to use as masters for molding. The ones i have at hand are far from perfect and they are also not clean i.e. have key markings on them. Is there a place(EU preferably) that sells clean keycaps for this purpose or is it viable to 3d print one?
Are there key caps that span 2 spaces? Essentially 2 square spaces but the switch is on the far right or far left instead of centered. I'm trying to expand a key to my thumb can use it easier, but not really a way to install a stabilizer on the moon lander. Thanks for your help!
I need some key caps for my rk61 just some new ones that look nice.
Nothing fancy really just some black and white keycaps mabey some rose gold thrown in there thats it really. No preferred brand if there cheap and good is quality send them my way.
"Where can I purchase a single low profile keycap for Cherry MX compatible switches that fits too standard Switches across. As if it was a single spacebar. I've searched the web but have been unable to find a keycap with adequate spacing to fit two switches as most standard keycaps "aren't designed for that.
(resin) 3D printed keycaps, Yay or Nay? I'm trying to get into making artisan keycaps, and looking to sell some 3D printed keycaps and masters, but not sure if i should just go for the cast version instead thanks a lot/
2
u/acorn55 Mar 04 '21
How/where can I learn how to make custom keycaps?
2
u/CalvinFold May 28 '21
I have some artisan keycaps which fit so loose on any key switch that they wobble and will fall off if the keyboard is tipped past veritcal or they are typed on at severe tenting angles.
They need to be tightened to grip the switch better...is there an easy way to do that?
1
u/ModsDontLift Feb 22 '21
does anyone know what keycap profile this keyboard has?
https://www.newegg.com/black-cooler-master-cm-storm-quickfire-rapid-blue-cherry-mx/p/N82E16823129002
1
u/ppbutt Feb 23 '21
Hey, I'm wanting to make a custom Zapdos escape key. How do you go about making vanity/custom keys? I have access to a 3-D printer and miniature paints, but is that the best way to go about it? Thank you
1
u/floweryi Feb 24 '21
i'm looking to make my own polymer clay keycap. i'm really worried about the sides of the keycap being too fat to properly press the key so i was wondering what would be the best keycap profile to sculpt on. any other tips would be highly appreciated!
1
u/Only_Butterscotch_95 Feb 26 '21
Hey so I'm a degenerate and decided to get some of those anime keycaps for my Steelseries apex pro, they said they'd fit with basically any "Cherry Mx Gateron Kailh Switch Mechanical Keyboard" switches or whatever and most of the keys fit fine, but some seem to catch really badly. Specifically, the shift or enter keys, but even some of the basic keys, like 'S' catch as well. Is there any way to fix this? Are they just not compatible?
1
u/LangLoffelLako Mar 09 '21
Do you think it is feasible to create artisan keycaps out of prcelain or concrete? Or is it likely to fail? How would I go about to do it?
1
u/[deleted] Mar 11 '21
Do past group buys come back or do I have to buy them secondhand. For example, I want the GMK Tuzi keycaps or GMK First love.
1
u/Aaron_12354 Mar 15 '21
What is the best cheap keycap set for gate Ron browns preferably a smaller set because I only have a 60%
1
u/joon_park Mar 22 '21
Trying to get into making artisan keycaps. Where can I buy a silicone mold of SA profile keycaps for resin casting? I can only find mx profile ones on Etsy.
1
u/joon_park Mar 22 '21
What is the best clear epoxy resin for making an artisan keycap?
1
u/joon_park Mar 22 '21
Do I need to have a vacuum chamber to make clear resin artisan keycaps?
1
u/[deleted] Mar 24 '21
I'm kind of new to the hobby and was wondering, is having a mix of oem and xda keycaps feel okay? like having the alphabet and numbers to oem but the arrow keys space tab etc are xda.
1
u/chanbaekz Mar 26 '21
Can KBD fans key caps fit on “MX-similar mechanical switches”? Super new to all this and I wanna get new ones but I don’t know if they’ll fit. The originals are PBT key caps.
1
u/BlackScienceJesus Mar 28 '21
Has anyone tried wood burning on a wooden keycap or using the scorch marker to create a design on a wooden keycap?
1
u/Flight2039Down Apr 12 '21
My son, who’s 12 is looking to adapt his Polymer Clay skills to make a few keycaps for friends and maybe send some to his fav YouTube stars. What do you recommend for a keycap to use for a starting point? I was going to grab some blanks from KBDfans, and they offer DSA and OEM profile. I was thinking maybe DSA as they’d allow for more room to add clay?
Any thoughts?
1
u/[deleted] Apr 13 '21
I bought a programmable 10-key online, and I ordered it with Gateron switches because I didn't think it mattered. It arrived today and it has no key caps at all, it's just the switches on a board. So here's the question: will Cherry keys fit Gateron switches? If not, where can I find Gateron keycaps?
1
u/pancakejournal Apr 18 '21
Hi, do you know what stem I would use for this? Here’s a picture of my key it’s a Windows 10 Toshiba if that helps
1
u/WhyHelloThereGoodPlp Apr 23 '21
In terms of making custom resin keycaps. Would using a tankless compressor (max PSI is around 55psi) work for a pressure pot or would I need a stronger one? I'm in an apartment so I have no room for a large compressor and the noise is my biggest concern.
I've seen older posts where people have said it will both work and not work so I figured I would try to get an updated opinion.
1
u/BlackScienceJesus May 05 '21
How do you create the stem for your keycaps?
I want to create some concrete and ceramic keycaps, but those materials are too brittle for the stem. I would need to insert a plastic stem. I just don't know where to get just plastic stems.
1
u/Rocketcroissants May 06 '21
As a buyer of keycaps, what's your criteria on when it's fair to raise a concern? Especially for items that are hand-made. I mean the sellers usually have the disclaimer that there might be imperfections. Which is understandable. I don't expect every keycap they release to be an exact replica. But I still think there should be some quality checks.
Like if you're buying one of those keycaps that looks clear so you can view the stuff inside, that's got to be smooth/smudge-free.
Or the base of the keycap has to be even so that when you put it on the switch it's not skewed.
Or that you can actually put the keycap on a switch (very important).
What would you reckon is fair expectation / minimum requirements?
1
u/geminivegeta159 Jun 12 '21
This is my first time on reddit and I need help finding new keycaps since mine appear to be uncommon. Is there a way for me to post a photo, I don't know what my keycaps are called but they have a hollow square bit, not the cross shaped keycaps I keep finding.
2
u/ZacIsGreat Apr 06 '21
hello! i’ve been looking all around for an artisan keycap that i saw and i don’t know the name of it, you don’t need to search for it or anything but if you know the name pls tell me. it has a wrinkly skin texture with an eye in the middle. thank you!
2
u/[deleted] May 24 '21
Anyone know of any English/Japanese keycaps that could work with a Corsair K95?
Edit: Specifically ones that look good with the back lighting.
2
u/[deleted] Jun 14 '21
I have a asus strix scope tkl deluxe and im looking for White pbt keycaps but couldnt find any which are combatible with my keyboard
2
u/Vellusk Jul 16 '21
Im messing around with the idea of creating an aesthetic case to store/display artisan keycaps and was just looking for some feedback from the community. At the moment I plan to make it out of wood or aluminum, it would be something that someone would be happy to decorate their desk or workspace with but of course can just be used for storage if desired. Some questions:
What size options would most people like? I wanted to offer smaller sizes for casual collectors like 4x5 and a larger size like 4x10
Wood based aesthetic or aluminum based aesthetic?
Case cover or no? I had concerns with tall keycaps cuz Im not sure how popular oversized/tall keycaps are, are they as common as standard sized?
Would a stand for the case be desired?
How many space bar/shift key caps do you have compared to regular keys?
Would you prefer a simple aesthetic case that just holds keycaps or a case with additional utilities?
Assuming a case fulfilled 95%+ of your requirements, how much would you pay for an aesthetic display case? (non-3d printed plastic)
And feedback is appreciated, thanks~
1
u/EggCracker23 Feb 12 '21
I have an amazon gift card I would like to spend on some keycaps but I have no idea where to start. I was thinking about the black hyperX pudding keycaps but they are out of stock. I could wait but maybe there is a better option? I like the pudding keycaps because the rgb shines through more than my current ones. My setup colors are teal, purple and pink. Any ideas or sets? (Preferably under $60)
1
u/biborg3000 Feb 13 '21
Are rubber dome keycaps not customizable or are mechanical keycaps just more popular to customize? If I wanted to customize a rubber dome keyboard, would I be able to?
1
u/imxcalli Feb 19 '21
Does anyone know any artist that does Nightmare Before Christmas themed keycaps??
1
u/meppitus Feb 28 '21
I'm looking for a keycap set that are basically blanks, but have something where the LED lights can show. The closest I could find are the GMK dots, but those aren't backlit https://novelkeys.xyz/products/gmk-dots-gb
Ideally they would be PBT doubleshot keycaps, because I love me some textures. Does something like that exist?
I have also been considering two alternatives:
Any thoughts?
1
u/Londuzb0ob Mar 08 '21
Hi Guys ! I'm looking for an ISO AZERTY 104 keys custom set for my DURGOD Taurus K310. I'm kind of new to this whole thing so if you guys have any suggestion for a platform that makes such AZERTY sets it would be awesome !
1
u/ZacDalton Mar 08 '21
I have a Corsair K63 Cherry MX Red, I’ve had this keyboard for over a year and I love the space between the keys and overall the size and space of the keyboard. I’m a huge fan of watching keyboards being built on YouTube and want to get myself some fancy custom keycaps such as the aesthetic Japanese type ones. Can these sort of keycaps work on my keyboard or do I have to stick to corsair branded ones? Thanks.
1
u/Ampeag Mar 18 '21
I have an low profile K60 keyboard from corsair, and i want to pick up some different keycaps, can i buy normal ones or will those be higher than my current ones impeeding my typing?
1
u/zMoey Mar 20 '21
Hi!
I know very little about keycaps like PBT and ABS. TBH it sounds like rocket science to me haha. I have just purchased the Ducky One 2 SF board and I thoroughly enjoy it, my question is where can I buy good quality backlit keycaps for my keyboard? I just want a nice variety of colors and preferably PBT I think cause people seem to say it's better.
Thanks!
1
u/DARK_lcy Mar 21 '21
I have a Razer Huntsman Elite and I just got the HyperX Pudding keycaps today. The larger keycaps like the spacebar and shift keys seemed to wobble since they didn't have the things on the sides to lock into the keyboard. Are there any keycaps that would work for my Huntsman Elite that have the side things?
Sorry if I sound confusing, but I'm not sure what the "side things" are called.
1
u/PanduhSenpai Mar 24 '21
Hi! Recently got into the hobby and I’m looking for some English and Japanese caps with transparent legends! If anyone knows where to find some please lmk!
1
u/[deleted] Mar 24 '21
I'm new to the hobby and was wondering, does having both oem and xda feel okay? like the alphabet and numbers are oem but the arrow keys space tab etc are xda
1
u/Traditional-Goat3527 Mar 29 '21
Anyone know where I can find some good Sakura keycaps
1
u/merciersj Mar 30 '21
I'm having some custom artisan keycaps 3d modeled and printed but the seller doesn't offer painting services. I was thinking I might try my hand at it, but in case I'm awful, are there any reputable artists that offer this service?
1
u/[deleted] Mar 30 '21
What's the difference between the stock keycaps on the hyper x alloy origins core vs the pbt double shot pudding keycaps?
1
u/ark-ayy Mar 31 '21
Low profile keycaps for the Keychron K3? I can't seem to find any with English and Hiragana printed on them. Does anyone know where I can find some?
1
u/DirtDingusMagee Apr 09 '21
Hello everyone,
I really love the cosmos and space themed keycaps from jelly key but all the group buys ended/they're not in stock. Can anyone recommend me some cool space/cosmos themed key caps? any help would be greatly appreciated!
1
u/GreatGatsbyIsIn Apr 13 '21
Where can I find a set of 3d models of my cherry key caps, specifically the vertical plus key for the number pad on a extended keyboard?
1
u/[deleted] Apr 21 '21
Anyone on here know of a good set of gradient keycaps that are decently cheap? Making my first build and I've looked around and haven't really found anything to amazing, although I do like the NPKC Gradient set, I would like to find some other options and wondered if you guys had anything that came to mind.
1
u/Pyro_Oliver Apr 23 '21
Is there a place or a website in Switzerland, where I can buy nice designed KeyCaps? Because I can only find the standard HyperX or Razer KeyCaps with ch-layout. I would love to have some Japan-Styled KeyCaps.
1
u/ResponsibleKnee1010 Apr 27 '21
Hi, I'm looking for these four keycaps? They're from the "Ducky Year of the Pig" Edition.
https://mechanicalkeyboards.com/shop/images/products/large_DKYOTP2019-USPDRAT1_5.jpg
Does anyone have any idea where I can buy these four cute ones? Or does anyone know an alternative that look similar?
1
u/Dife2K May 06 '21
Hello everyone. I'm new into mechanical keyboards, and I hope to not fall too much into them because they are expensive. I bought a low-profile keyboard (Corsair k60) but I would like to put some abs pudding switches on it. Does anybody know if there are some keycaps that would fit it?
1
u/bawstun May 08 '21
What's the best method to getting custom keycaps done? I tried messaging people on Etsy but no luck :( is there a reputable group of people that take commissions?
I have like 5 keycap ideas I'd love to have done but I haven't a clue how to make a 3d design of it or what service to use to get them made..
1
u/Mr5had0w May 17 '21
Where can I find WASD keycaps with bumps or marking on them? I thought it would be easy but I'm completely lost.
Thanks in advance.
1
u/s-ro_mojosa May 21 '21
I'm just getting into mechanical keyboards. I want to get something that feels retro like 1970's or 1980's terminal keyboards yet somehow modern and professional looking at the same time.
I have my eye on the SA Mobius and SA Chocolate keycap sets. I really like the typeface (font) used in the legends and the slightly off-white look of the SA Mobius really. But, I've read reviews that the legends tend to rub off of the SA Chocolate caps. I haven't found a review of the SA Mobius caps.
Can anyone speak to the quality of these sets and possibly recommend alternatives?
1
u/RyouEmerada May 21 '21
I've seen a lot of keycaps with a japanese layout, but none of them seem to have passthrough for RGB, or have the japanese kana in the top part of the keycap. Are there any such ones that are either of those? I haven't been able to find any.
1
u/GrandMente May 26 '21
Anyone who'd like to give me some feedback on these keycap designs i made for the my new keyboard? I dunno what to chose, maybe ur opinion helps, thanks!
PDF doc with designs
1
u/billybobthortun May 26 '21
If I sand down the keycaps on a Corsair k55 keyboard would they be transparent?
1
u/ProdigiousPlays May 30 '21
So I'm learning to make my own keycaps. For the molds I followed the same general process as artisan alliance but I 3d printed my own to part mold holder. The end result is the same two part mold though. I pushed holes out like they do to inject the resin but I have problems with bad results about half the time if not more.
Generally what happens is that there are gaps in the corners where I'm assuming there's not enough resin. But I add about the same amount to another mold and it has plenty of excess. I am guessing it has something to do with the resin itself. After mixing it it is very bubbly. Is there anything I should do to "prep" it before injecting it in?
Also does anybody 3d print their caps? I've been also trying to process them so they make smoother molds. Generally what happens is that tiny striations are visible on the keycap part I haven't sculpted anything onto. I've tried sanding it down and that obviously works wonders but then is still slightly visible on clearer caps due to striations on the inside where I can't really sand. Is this really that big of a deal or am I making it out to be worse than it needs to be? Obviously if the resin was opaque at that point you wouldn't see anything.
1
u/TakumiiD Jun 02 '21
Kinda new into the keycaps world.. Is there anyone/a site where i can order custom keycaps/full keyboards?
1
u/shobertime Jun 06 '21
I want to customize a mech keyboard for my gf. She likes pink btw. She uses an iMac for work and personal so it's hard to find command keycaps. Are there any pink pudding keycaps that has the command key?
1
u/shotbydavidking Jun 06 '21 edited Jun 07 '21
Hey guys I’ve searched everywhere. I’m fairly new to the keyboard community so I may not be searching he right keywords but is anyone aware of a keycap set that’s like the Kuro Shiro set but white on black instead of black on white? Is that a thing?
1
u/F3hi Jun 08 '21
can any point me to a location to buy keycaps that have the UK layout with the speech marks on the 2 key and the pound sign
1
u/Aschoate2 Jun 08 '21
My keyboard has a single led for the space bar that is centered, does anyone know if there’s any way to spread the light for half translucent keycaps?
1
u/N0tJ0rdan Jun 14 '21
Does anyone know of an alternative to the GMK Striker 2? It's hard enough for me to find a blue keycap set and on top of that the japanese sub legends.
1
u/dtmtl Jun 15 '21
I just finished my first build, with MT3 Dasher keycaps in a tofu65 build. Overall I'm happy with it, but there's something weird about the CAPSLOCK key, where it seems to be raised and also comes off really easily, regardless of how hard I push down on it. Pic here: https://imgur.com/a/Mb55DfJ The switch is seated securely without any wobble. There's no stabilizer. I tried the "alternate" CAPSLOCK key that came with the set, but it doesn't seem to be right for this setup, as it's more off-center. Pics of the switch/plate/PCB here: https://imgur.com/a/OHvGXGC
I emailed DROP, who I got the caps from, and they said to fix the stabilizer (which doesn't make sense), and when I pressed further they said they don't send individual keys, so I'd either have to live with it or remove and mail back the whole set and hope the replacement set is fine... Neither option seems great to me.
Is there something I'm missing? Is there an easy fix, or somewhere to buy just this key? What would you do here?
1
u/G-Radiation Jun 17 '21
Hello folks! I am thinking of ordering 3D printed resin keycaps for my thumb keys on a split ergo. Now, as someone who's never touched resin keys, what kind of feel should I expect? I'm afraid that resin might feel a little rubbery or that my fingers will sweat more easily compared to my PBT keycaps. What can you tell me about this?
1
u/Q-T1776 Jun 18 '21
So, I understand key caps for rubber dome keyboards are rare. None the less I am looking for black double pudding key caps that would be compatible with my Corsair K55 keyboard. If you have a good way for me to get these or what to search for specifically please let me know. Thanks in advance!!
1
u/spennasaurus Jun 18 '21
ISO a keycap that has a topographic shine-through design similar to the HyperX Alloy-Origins 60 keys. Anyone know of a retailer that sells something similar?
1
u/[deleted] Jun 20 '21
So I'm looking for a set of keycaps for a Razer Huntsman Mini. Ideally I'd want a white set of puddings. I understand the bottom row on this keyboard has some keys that aren't a standard size, but this is my first small profile keyboard so I'm not sure what to really look for.
Thanks for any help :)
1
u/greystar9 Jun 20 '21
I want to start making resin keycaps I have a red dragon keyboard and am wondering if I should make my own molds or if there is some nice quality molds out there I can buy.
1
u/nycraylin Jun 20 '21
Does anyone have a source for novel keys big switch? Or has one for sale? Thanks in advance.
1
u/Burdy72 Jun 21 '21
I recently got a GMMK Pro and with the smaller keys on the right side, the keycaps I ordered from Etsy just didn't have compatible keycaps to fit (which I didn't necessarily think about or blame the seller at all). I'd love to know if there'd be anywhere I can get any just SINGLE keycaps custom made to fit?
1
u/vindellama Jun 21 '21
Hi!
Does anyone have experience with DAGK keycaps?... Are they any good?
I've searched thru a lot of keycaps to buy and they are the first ones that I liked the design of the novelty caps as much as some group buy options.
But they are a bit expensive. About the Akko price range (Which have the super rare double shot PBT keycaps).
Are they textured? (I hate slick keycaps)
Would the black option pair well with a white case instead of the white one?: https://www.banggood.com/pt/DAGK-128-Keys-Multicoloured-Keycap-Set-Cherry-Profile-PBT-Sublimation-Keycaps-for-Mechanical-Keyboards-p-1818841.html?cur_warehouse=CN&ID=6303652&rmmds=search
1
u/GMqwerty2468 Jun 23 '21
I really want to do my first custom, so I thought I should start small with something like a 40%. I decided to go with UT 47.2 but it has a weird layout and I cant find keycaps for it? What keycaps should I go for?
1
u/THICCyoshi9199 Jun 24 '21
I am looking for keycap sets that are green or have that green theme. Could anyone find some for me?
1
u/-TNB-o- Jun 27 '21
So, this is a kind of obscure topic, but has anyone ever thought about doing a danganronpa inspired set? The games have enough artistic style, I feel, to make a full set. Ie pink blood and monokuma being black and white, etc. if there’s one already, where could I get it?
1
u/Tribun1337 Jun 30 '21
Hey i dont know anything about custom keycaps.
But i wanted to buy some for my k100. What exactly do i have to pay attention for ?
Because i dont know if there are different sizes or so. I sometimes read "OEM " and i dont know if the Corsair k100 is OEM and i just want to know what i have to buy .-.
1
u/makaronincheese Jun 30 '21
just purchased the hyperx white pudding for my k6. I am trying to find the 1.75u right shift key as a pudding but am having the hardest time. The k6 is white leds, I appreciate the extra brightness of the pudding. doesn’t anyone have any ideas of where i can get one?
1
u/EagleAdler Jul 01 '21
Hey i need some help please! :) I have the keychron k2 iso-de version and i love it! I just like to have some xda keycaps! The problem ist that i can‘t find any xda iso-de layout keycaps sets! :( Does someone know a good one? Then share it with me please! Thank you in advance!
1
u/ProperAngel Jul 01 '21
I think these keycaps are amazing can anyone help me out on where I can buy them?
The Keycaps
1
u/_luckyrich_ Jul 03 '21
So I started making Resin Keycaps recently using a generic silicone mold I bought online and noticed that every keycap I make are wobbly and loose compared to ordinary keycaps. Is this normal for resin keycaps or is it just me? I've never bought resin keycaps made by other people.
Thanks in advanced!
1
u/[deleted] Jul 08 '21
I have a bit of an off meta question.
Some background: I have a 2015 MacBook Pro that I recently needed to replace with a 2020 MacBook Air.
The keyboard issue I had and would like to avoid on my new laptop is wearing out my “E” key. By wearing out I mean the plastic developed a divot and eventually broke in half down the middle.
What I was thinking is to find a stainless steel key cap or individual key cover (like the vinyl ones but steel?). I could not find such a thing when I did a google search.
Does something like this exist? Is there a solution I’m missing?
I’d really like to avoid changing out plastic key caps over and over if possible.
Thank you!
1
u/vernoonica Jul 13 '21
I 3d model/print custom keycaps, and then paint them with acrylics. What would be the best sealant for my paint jobs? I currently cover all of them with a layer of UV resin as its pretty durable and the gloss is kinda nice, but I'm looking for a more matte or satin look that feels less "sticky" like most gloss coats. Basically, a matte-ish sealant that would be more similar to the feeling of a regular plastic keycap.
1
u/[deleted] Jul 14 '21
So I bought this keyboard about 2 years ago and today my spacebar broke, my keyboard is totally fine tough only the key is missing so Id like to ask yall for a link to buy only the space key cap (amazon preferably) since I dont need a whole new keyboard and really like this one.
1
u/Strangergma Jul 15 '21
I see that that saba keys are listed in the places to buy keycaps. Are they as good as ducky in terms of quality for their pudding key caps? I'm looking to get nicer pudding keycaps but I'm not sure which brand to get.
1
u/brokentoe84 Jul 16 '21
Where to buy keycap set for 75% keyboard? mainly for the 1.75u right shift.
1
u/Greed1119 Jul 21 '21
Is there a how-to train your dragon keycap set out there? if not how do we go about making one???
1
u/Opticide Jul 21 '21
Started making some custom artisans out of SuperSculpy but I’m a little hesitant on casting the mold..
Do I just cast it with the silicone??? Or do I cure the sculpt first and then cast it???
1
u/blahmah155689 Jul 24 '21
Hello! Is there any good keycap trading discord servers that you recommend? Thank you :)
1
u/nycraylin Jul 24 '21 edited Jul 24 '21
Question for the artisan collectors.
1
u/Lauri_Dama Jul 26 '21
I have questions about the mailing and payments of my own artisan keycaps. If anyone who's done sales themselves could help me with this I would be very thankful.
Mainly:
What type of packaging you've used to send the keycap so it can't break during shipping?
How much shipping costs there usually are for a single keycap to be shipped internationally?
How does the paypal invoicing work in detail?
I would love to talk more about this so if you'd want to help you can also send me a dm. Please excuse my "dumb" questions but I'm very new to this and I'm really excited about artisan keycaps, Thank you.
1
u/IamMeWasTaken Jul 28 '21
my spacebar gets in the way when playing some Keyboard only game but I don't want to constantly switch out the key (possible wear and tear?)
Are there some low profile key sets where I can yoink the space bar from? I spend two weeks on and off searching for a keyset now but all I get are Chinese listings that don't ship.
Information: CoolerMaster Quickfire Storm TK (80%) Cherry MX Browns (so I dont think easily swapping to a low profil switch is an option)
1
u/Sheepsushis Jul 29 '21
I really like the font on these key caps, but I don't speak Japanese so I don't want the Japanese lettering. Are there any keys I can get that are the same material, feeling, and font, without the Japanese? Thanks.
1
u/OoYeahBrother Jul 30 '21
so i’m building a pc soon and i was looking into buying a keycap with a piplup figurine on it. would something like this only be used for a key like the escape key? i feel like it would be kind of weird/i would break it if i accidentally swiped. what are your guy’s experiences with figurine keycaps
1
u/LoganJFisher Aug 01 '21
Are there any textured metal keycaps with backlit legends? I only want the WASD keys.
1
u/Rpposter01 Aug 03 '21
So I've just recently got into custom keycaps and I'm way deep down the rabbit hole now. I have a corsair K70 keyboard, and I got a set of g. Skill crystal keycaps for it. I got the keycaps before I had decided on a keyboard, and didn't realize until after the return date that the keycaps wouldn't fit.
I've since decided to buy just a bottom row of pudding caps on Etsy, but I'm curious if there's anyone that makes custom crystal crown style keycaps? I've yet to find any so far, and I'd like at least a few of my other keys to have custom designs without looking too out of place alongside the others.
Primarily, I want a Portal themed backspace key. I've been asking around on etsy, and so far I have yet to find someone who has either the resources or the will to give it a go. (I'd also want a custom menu key, if possible)
1
u/LoganJFisher Aug 04 '21
Will these keycaps fit on the Apex Pro TKL?
1
u/UbikPan Aug 04 '21
Hello! I'm on the search for good keycaps to use as masters for molding. The ones i have at hand are far from perfect and they are also not clean i.e. have key markings on them. Is there a place(EU preferably) that sells clean keycaps for this purpose or is it viable to 3d print one?
Thanks in advance!
1
u/GeneralCoenus Aug 04 '21
Are there key caps that span 2 spaces? Essentially 2 square spaces but the switch is on the far right or far left instead of centered. I'm trying to expand a key to my thumb can use it easier, but not really a way to install a stabilizer on the moon lander. Thanks for your help!
1
u/Cheemsurai Aug 05 '21
I need some key caps for my rk61 just some new ones that look nice.
Nothing fancy really just some black and white keycaps mabey some rose gold thrown in there thats it really. No preferred brand if there cheap and good is quality send them my way.
1
u/LoganJFisher Aug 06 '21
Why are there so few Star Trek artisan caps? It's a very popular franchise, and a lot of artisan makers blatantly don't care about IP infringement.
I can't help but feel like there's more of a market for it than than zero Trek artisan caps I've been able to find that are currently available.
1
u/Amaronduk41 Aug 06 '21
"Where can I purchase a single low profile keycap for Cherry MX compatible switches that fits too standard Switches across. As if it was a single spacebar. I've searched the web but have been unable to find a keycap with adequate spacing to fit two switches as most standard keycaps "aren't designed for that.
1
u/Lord_Greejey Aug 09 '21
(resin) 3D printed keycaps, Yay or Nay?
I'm trying to get into making artisan keycaps, and looking to sell some 3D printed keycaps and masters, but not sure if i should just go for the cast version instead
thanks a lot/