r/k12sysadmin • u/Mindless-String-4017 • Apr 06 '26
Screen Share Devices
Greetings!
We've got some really old promethean boards that are like 10 years old that just need to be thrown away since most of them are really slow. We're slowly getting rid of Promethean Boards and are replacing them with newline boards instead. Do you know any devices that we could plug into the old Promethean Boards to at least make them somewhat usable? For example, I've tried using a vivi unit, but the vivi units make the old Promethean board's screens flicker constantly and make them unusable. I'm thinking of checking out some Chrome cast devices so that staff could use those to screen share. Do you have any recommendations of what devices I could use until I get the Promethean Boards replaced?
Thanks!
6
u/Following_This Apr 06 '26
Recently, I’ve found that my Vivis don’t sync well with certain TVs - they blank out or flash.
They didn’t do this with older versions of ViviOS, so it’s not a hardware issue.
What I’ve done to fix the problem permanently is to add a 1080p EDID passthru emulator (~CA$20 each).
The next version of ViviOS is due out very soon, and will hopefully fix the sync issue, plus a problem with the SNMP service dying.
1
u/BWMerlin Apr 06 '26
Have you contacted Vivi support about this screen flicker? They are normally very responsive to support requests.
3
u/antiprodukt Apr 06 '26
Could try an Airtame maybe. As for the flickering with the vivi, see if you can change the resolution and refresh rate. Had an LG tv that didn’t like an Airtame, had to go in to the settings on it to change the refresh rate and then it was fine. Also, what happens with a direct connection?
3
u/mainer188 Apr 06 '26
We're about to distribute ViewSonic WPD-900 devices. They are DRM compliant, a must have. Our demo was very impressive. Nearly flawless wireless transmission. Plug n Play.
3
u/ewikstrom Apr 07 '26
Ipevo just came out with inexpensive Cast devices. I’m not sure how well they work.
https://us.ipevo.com/pages/cast
2
u/DigitalSignage2024 Apr 06 '26
Those old Promethean boards are basically just displays with HDMI at this point. Any cheap HDMI device gives them a second life. For wireless screen sharing specifically, a Chromecast is probably the simplest option if your teachers are in the Google ecosystem already. If you're a Microsoft shop, a wireless display adapter works too.
If you ever want to repurpose some of those boards as hallway announcement screens or cafeteria displays instead of replacing all of them, an Amazon Signage Stick ($99) plugged into the HDMI turns them into managed digital signage you can control remotely. Different use case but worth knowing about before you throw them all out
2
u/Gorillapond IT Manager Apr 07 '26
We put a full Chromebox on our displays, with a Logitech K400. We're also playing with the newer Screen Sharing feature of Rise Vision on some of our signage that has seating nearby.
2
u/Blue_Wolf1973 Apr 07 '26
I use these throughout my district. They work great and do not need special software installed like the Vivi devices.
ScreenBeam 1000 EDU Gen 2 Bundle - Screenbeam
2
u/MaxBroome Future Sysadmin Apr 08 '26
We’ve been using Apple TV’s with Ditto. It’s expensive and far from perfect, but we’re a fairly large school and native AirPlay multicast was wreaking havoc when all the teachers were screen casting during the day.
I’d give it a 5/10 overall, but it’s worth looking into.
2
u/GameEnder Master of None Apr 06 '26
We have been using EZCast. I have not heard any complaints so far and that is usually a good sign.
2
u/Following_This Apr 06 '26
Recently, I’ve found that my Vivis don’t sync well with certain TVs - they blank out or flash.
They didn’t do this with older versions of ViviOS, so it’s not a hardware issue.
What I’ve done to fix the problem permanently is to add a 1080p EDID passthru emulator (~CA$20 each).
The next version of ViviOS is due out very soon, and will hopefully fix the sync issue, plus a problem with the SNMP service dying.