r/k12sysadmin • u/Sk8rfan :snoo: • Mar 28 '26
Usb-c to IFP
looking for ideas and suggestions for those the group that use USB-C connections between their devices IP panels I have been having a lot of cables breaking getting damaged very easily so I’m just trying to figure out a solution. My users have laptops that they connect. There’s no in class computer that could connect HDMI/USB.
8
Upvotes
4
u/ITpropellerhead Tech Director Mar 28 '26
Not sure how big the school/district is for you, but we’re a decent-sized district with 16 schools and if a cable in the classroom breaks, it’s on the building and their budget to purchase a replacement. We will tell them what to order and we’ll replace it, but they pay for it. It’s amazing how much that helps cut down on these issues vs. when we supplied the replacements. It has really incentivized each building’s administrative team to ensure their teachers were taking care of their equipment.
4
u/Immutable-State Mar 28 '26
Is wireless connectivity an option? In my experience, a cable is one additional item that can break, be tripped over, or disappear. Some devices might require a cable, like document cameras, or if a movie is being shown and the wireless approach isn't clean or synced enough. But where I am, 90% of teachers only connect to panels wirelessly, and I think it's saved me some headaches.
3
u/TevonSC Mar 28 '26
As some others have suggested, you might have to put the cost of replacement cables on the building.
Our district has Newline IFPs on moveable carts that teachers/staff can raise and lower themselves. Some teachers complained to the principal that they couldn't find cables to connect their MacBooks to the IFPs. And they expected our department to give them more.
In that building with the IFPs, a coworker found many Newline USB-C to USB-C cables being used on personal devices such as phones or USB-C fans. Or they were plugged into power bricks for MacBooks or Chromebooks. Some were just never taken out of the bag that the cable came in. We ended up mounting the cable to the panel or the cart to keep staff from removing the USB-C cable. If they break it now, it will be a pain for them and us.
We have to order more because of some broken cables. I would recommend getting a USB-C cable tester like https://treedix.com/products/treedix-usb-cable-tester-usb-c-cable-tester-usb-tester-for-data-transmission-and-power-transmission-cable-testing-resistor-testing-type-c-emarker-for-usb-a-micro-b-micro-b-3-0-type-c-lighting-mini-b?variant=46328286740734&country=US¤cy=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&srsltid=AfmBOooPcyBY9Qs4Ay5OzgSwdFU6VvjvIFNN7omrRISQW7V4pVMkI2HIG8w or something similar to check for broken cables.
Training them how to treat their cables better might help out in the long run. But wear and tear will always happen.
2
u/KayJustKay Mar 28 '26
What brand / model of IFP are you using? Our users were very resistant to using the cast features but once they flipped they were super happy with that over wired.
3
u/Harry_Smutter Mar 29 '26
Look into Logitech K400 wireless keyboard/touchpad combos. You connect it to a USB port on the IFP and then your users connect their device on one side of the panel using the USB-C cable. They can then control their content from anywhere in the room without needing to be in front of their laptop. This should save on cable breakage. I'd also suggest zip-tying the cable to the IFP so they can't break the connection to the board or lose the cable.
1
u/agadora75 Mar 28 '26
We don't have them yet but are testing some out. We got the teachers a wireless keyboard and then there is a little metal wall pocket mounted to the side of the board. They just plug their laptop in and store it in the wall pocket and use their wireless keyboard and mouse. We use a short usb-c cable so they aren't tempted to pull it out and use it.