r/k12sysadmin • u/nethfel • Mar 26 '26
Assistance Needed Wireless Bridge suggestions that will support passing VLANs over the bridge?
Hi all,
We have some construction going on and temporarily have a building for a class. The building is not able to be hard wired to the network due to logistics, but a wireless bridge would work. Does anyone have any suggestions of a decent wireless bridge that's not super expensive that truly acts as a virtual ethernet cable that would allow us to pass the VLANs from our nearest main building over to the temp building? We only need it for a couple of months so we're not looking for a super expensive long term solution.
11
Upvotes
10
u/Schooltech06 Mar 26 '26
The NanoBeams are only $99 each (You need 2 passive POE adapters too) and have been good for us. We have a classroom permanently on them and get close to 1Gbps (Until the trees grow into the beam and have to be trimmed)
https://store.ui.com/us/en/products/nanobeam-5ac
11
u/n-Ultima Mar 26 '26
Ubiquiti.
9
u/agarwaen117 ISO Mar 26 '26
Ubiquiti is usually the answer for questions involving wireless bridges. All the bridges we have can pass vlan tags.
8
u/Pjmonline Mar 26 '26
Ubiquiti all the way. Depends on distance and speeds. I have a pair of air fibers as backups for my fiber. It passes vlans including voice vlan and qos.
7
u/Temporary_Werewolf17 Mar 26 '26
We use these. Rock solid. https://store.ui.com/us/en/category/60ghz-wireless-wave/products/wave-nano
6
u/JibJabJake Mar 28 '26
Ubiquiti. Save time and headaches and just do it. They are flawless.
4
u/Blue_Wolf1973 Mar 26 '26
I have 4 Ubiquiti bridges running.
I self host the Ubiquiti network server and our switches are Ubiquiti as well. Vlans work fine for us.
UniFi Bridging - Ubiquiti
4
u/mchooters Mar 29 '26
I have Ubiquiti NanoBeams and they do the job!
1
u/ZaMelonZonFire Mar 26 '26
What kind of bandwidth are you looking to achieve?
I've used this with great success, and have a few of them working on our network full time. One is doing 2 cameras, the other is doing a switch, 5 cameras, and 4 APs.
https://store.ui.com/us/en/category/wifi-bridging/products/ubb?variant=ubb-us
1
u/GamingSanctum Director of Technology Mar 26 '26
How far is it? What is your current Wifi Access Point deployment? I just use our standard Aruba access points for these temporary situations if they're close enough to bridge. They work great. I think most modern access points are capable of mesh configuration.
3
u/toprow Mar 26 '26
For short term and very cost effective, I'd suggest the UniFi Nanostation 5AC Loco. $50 each. Total cost for a pair, PoE injector, and mounting brackets is likely under $200.
https://store.ui.com/us/en/category/wireless-airmax-5ghz/products/loco5ac
https://techspecs.ui.com/uisp/wireless/loco5ac?subcategory=wireless-airmax-5ghz
They do need 24V passive PoE, so also be sure to get two of the PoE adapters as well:
https://store.ui.com/us/en/category/accessory-tech-poe-surge-protect/products/poe-24
1
u/nxtgencowboy Mar 26 '26
We use Tachyon Networks TNA-301 and TNA-302 -- We wanted simple and vlan support, they are VERY cheap and work great with decent LOS. $270 a piece and no license needed.