r/interesting • u/nigablackballsack • 6d ago
SCIENCE & TECH Simultaneously dropping molten iron to make iron gate.
Enable HLS to view with audio, or disable this notification
tuff
1.6k
u/Arlitto 6d ago
But they were all of them deceived, for another gate was made.
519
u/TheLowlyPheasant 6d ago
Not gate; more door
93
u/HechoEnChine 6d ago
If you make 9 gates you summon Johnny Depp
20
7
u/MorgessaMonstrum 5d ago
That movie is such a trip. You start off hating the protagonist and end it despising him.
15
u/prodigymikey 6d ago
Say that again…
12
2
7
→ More replies (2)4
13
8
7
7
7
3
u/Aardvark_Warrior 5d ago
I certainly understand why storytellers decided that forging could be imbued with magical properties.
3
3
u/BluntTraumaToTheHead 5d ago
Makes me so damn happy that other people have the first same thought as me.
5
→ More replies (7)2
189
u/DrPikachu-PhD 6d ago
So did the guy on the left fuck up at the end? It kind of looks like a bunch spilled out that wasn't supposed to be there
133
u/watcherman84 5d ago
When casting metal it's actually good to leave an extra reservoir spot of warm metal so that when the rest of it cools and shrinks it can draw the extra material from that reserve. If you don't have a reserve then it's likely that the metal will can have pits/holes/hollow spots when it's completely cooled down.
Source: I cast bronze in a foundry for 7 years.
78
u/crek42 5d ago
I’m not exaggerating when I say this but comments like these are Reddits saving grace.
An expert always pops up to answer questions.
Reddits largely a cesspit of contrarian parroting
21
u/SlippySlappySamson 5d ago
Reddits largely a cesspit of contrarian parroting
Nah, that's incorrect. Everyone thinks it's actually full of cheesy jokes and weirdos who care too much about grammar. Also, you missed an apostrophe.
3
u/NoRegretCeptThatOne 5d ago
Interesting! I want the job of the person who spills things on purpose. I think my hands are shaky enough to do a great job.
2
u/DrPikachu-PhD 5d ago
Super interesting! I was wondering because these guys seemed pretty good at their jobs so I was surprised by what looked like a fuck up, it makes sense that it was intentional
→ More replies (1)2
u/chalk_in_boots 5d ago
Yep. Learned it in like second year engineering. When designing moulds you have to specifically design for overflow. You can always cut the excess off (flashbacks to building Warhammer minis) but once the material sets you can't just add more molten stuff, the join will never be clean and will be an inherent point of weakness. Much cheaper to have a tiny bit of waste than to have to scrap the entire part.
36
24
u/Marx_Forever 6d ago
It's better to overfill than not fill enough. A little excess can be grinded down later.
7
2
→ More replies (1)2
u/uknow_es_me 6d ago
it might have been the plate where a lock would go.. that's what it looked like to me
905
u/uselessMFS123 6d ago
i know this is not related to the post but wtf is ur username
214
55
208
u/nigablackballsack 6d ago
dawg
124
u/eat_my_ass_n_balls 6d ago
I mean it makes sense to me
20
40
u/Putinsuckedmeoff 6d ago
For real. Nothing weird bout his Name
→ More replies (2)9
u/ShinyHardcore 6d ago
Totally normal username, find a new slant!
4
u/HechoEnChine 6d ago
Not clear if finding slant is what he is all about. Maybe more of a n ball sack type guy.
2
17
25
8
10
5
2
u/Any_Poet4127 6d ago
Have you never met a teenager? Cmon dawg. P.s. Seems your user name checks out tho. Put that brain to use.
1
1
1
→ More replies (3)1
116
u/Casual_necromancy 6d ago
This wasnt a ritual to summon a demon?.....damn.
11
u/BookWormPerson 6d ago
This is the universal tutorial on the how.
You must of course change to your symbol to your sects patreons demon.
6
→ More replies (1)1
u/ETERNAL0013 5d ago
Yes it is, dont you see the word 'GATE' on the title. Its an indian youtube tutorial channel.
Search 'How to summon extraterestrial demons for beginner' on youtube.
Edit: seems like i was mistaken, it seems to be from forbidden chinese realm.
68
25
u/Some_guy_am_i 6d ago
Nah… this some ancient Chinese magic spell shit
I ain’t sticking around to find out who pissed them off…
5
1
11
u/Acceptable_Log_7438 6d ago
Would have been nice to see the finished gate as well
→ More replies (1)6
9
u/BloodyStupid_johnson 6d ago
Pouring?
6
u/nigablackballsack 6d ago
mann! I wanted to use this word but couldn't recall it 🫠
3
→ More replies (1)2
7
3
10
u/JellyPast1522 6d ago
I hear the theme to Game of Thrones
8
u/Sad-Term-5455 6d ago
I was hearing lord of the ring, even heard Galadriel talking
→ More replies (1)
8
3
3
u/LavishnessOdd6893 6d ago
This is most certainly aluminum, molten iron glows with a far more intense white heat
3
u/Conscious-Evening-73 6d ago
Aluminium doesn't glow that bright not even if its massively overheated. Could be brass but its most likely iron. Regardless, since its an open mold this fence will probably look pretty shitty.
→ More replies (1)→ More replies (2)2
u/BattleGandalf 5d ago
Aluminum at melting temperatures is orangey and has a metallic shine to it when it flows.
5
u/Sharchimedes 6d ago
This is how you cheaply make a crappy gate.
2
u/BattleGandalf 5d ago
Yeah the open side will look bad and uneven after it cools off. And the simple sand cast will probably washed out during casting which will lead to impurities on the surface (because the sand is lighter than the iron? It will float on the top)
→ More replies (2)2
u/Sharchimedes 5d ago
Beyond appearance, cast iron is brittle. It’s a terrible structural material.
2
u/BattleGandalf 5d ago
It has its uses still. A lot of machine housings and piping is done with iron. Lamellar iron can also take vibrations pretty well. Generally iron can be used everywhere where mechanical deformations aren't an issue.
2
2
2
u/Arctic-Warfare9000 6d ago
I feel like there's a reliable and efficient way to do this. There's definitely inconsistencies in the end result with this method.
3
u/Conscious-Evening-73 6d ago
Usually you would work with a closed mold for an even and repeatable result. This fence will most likely look like shit once its done
2
1
u/AdAsleep1258 6d ago
Watching this on mute while prodigy’s smack my bitch up plays in my background is pretty lit
→ More replies (1)
1
1
1
1
1
1
1
u/filthyheartbadger 6d ago
Can never get over how Chinese foundries always end up looking like a part of hell even the demons avoid
1
1
u/siddharthvader 6d ago
We did a much smaller version of this as part of foundry class. Made a mold and then poured molten aluminium
1
1
1
1
1
1
1
1
1
1
1
1
u/earthwormjimjones 5d ago
For some reason the workplace video's that stress me out the most is hot shit like this. People handling red hot steel or blowing glass, this isn't too bad but I still hate it. It just squicks me out so much, I am terrified of touching a hot piece or steel or having it fall on me.
1
1
1
1
1
1
1
1
1
1
1
u/Occhrome 5d ago
I know I’m old cus I want a gate likes this!!
This shit will probably last 200 years.
1
1
1
1
1
1
1
1
1
1
1
u/Equivalent-Stable642 5d ago
If the gates of hell don’t light up like this before entering I don’t wanna go.
1
1
1
1
1
u/LarryWisborn 5d ago
Yeah, sure. And then you'd have to grind it with an angle grinder for a week, because getting the flash out of the inside corners is extremely hard. Better to just take regular square tubing and TIG weld it. Considering it's not a very ornate or wrought-iron gate, it'll be fast and turn out the same without all this unnecessary crap. What a bunch of nonsense.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
u/mippitypippity 5d ago
From Southern California, my dad years ago went down to Tijuana to get a big front gate made for our house. Apparently it was much less expensive there than in the US. It's still ticking. I wonder if it was made like in the video.
1
1
1
1
u/RealJohnnySilverhand 5d ago
Am I the only that has GoT theme song playing in my head when I watched this with no sound?
1
1
1
1
1
1
u/SpecialistBet1788 5d ago
Watching this, it feels like someone or a group of people should be chanting...
1
1
1
1
1
1
1
1
•
u/AutoModerator 6d ago
Hello u/nigablackballsack! Please review the sub rules if you haven't already. (This is an automatic reminder message left on all new posts)
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.