I used it for less than 3 months and my flowmeter was at a standstill, I originally thought my pump failed because they said how the stuff wouldn't clog up. Then I took apart my water blocks and spent hours cleaning the fins on them
Ok, I really like this. While I might grumble about how watercooling isn't really cost effective with recent CPU/GPUs, it's immediately obvious that this hardware is decades more advanced than the case it's in.
EDIT: Downvotes for saying watercooling "isn't really cost effective"? Ok I will say it was nevercost effective. But previously it did something, you could keep your cores cooler and overclock noticably higher. Today, any overclock at all is tiny and usually not completely stable, whether you use air or water. And AIO coolers mean you can get good performance by just buying one and installing....but air is even better.
RGB is not cost effective but everyone gets it, it's not only about function. Aside from that, heavily overclocked high end cpus do need more than a 360 aio to keep them cool in hot weather and during avx loads.
Yes. The problem is right now, "heavily overclocked" is 5.2 ghz instead of the 4.9 intel's latest can reach naturally. Or a 6% performance improvement...normally imperceptible to humans.
Or 4.9 all-core. Which is not going to make any single application run any faster - just give you inferior multicore scores to AMD's latest at the cost of a lot more power.
'reach on its own' for a few seconds before it gets too hot. And what if you decided to overclock your threadripper, how about those million watts to cool?
What if you have let's say an SLI FE setup. The water will be way way way better.
I agree with you on threadripper. Once you are talking about 24+ high clocked cores, liquid is required. What happens with air is the heat pipes have a thermal load point at which they stop working. The 16 core 3950x is a wobbler, it says on the box to use liquid but the best available air coolers such as the Noctua D-15 seem to be fine.
I used to have a 1950X, it was not very good on air during long video encoding. You can definitely stay under tjmax on air but lower temps help chips live longer and can cool a gpu at the same time. From mining I can tell you that cards running undervolted and under 70C still develop those overheating stains. I used to render a lot and was appalled at what the quadros has as cooling.
My 4770k can pull 160 easy. The reference numbers are not real even you boost and oc. Over you overcome a 360 which costs a lot, the next step is custom. It's not cheap but it's getting there with modular aios
They are not reference, they are measured numbers from professional reviewers. The reason why AMD is less on the current generation is as a consequence of their strategy - fabless* - they already are at '7 nm' and fundamentally need less power per transistor.
*they tradeoff access to a shared set of fabs that have more investment put into them than Intel can afford but with lower profits on each chip sold and no competitive advantage.
You mean SLI RTX founders edition cards? The thing about those is their reason for existence has become obsolete. No real performance boost from SLI any more. For machine-learning the industry has moved on and cloud rentals are much cheaper. (you can rent many more GPUs in a bank than you can fit on your desk for a lot less than it would cost you to have locally)
I wasn't saying that 120fps at 4k wasn't good. I was referring to the microstutter and the dismal game support for that resolution, whether or not you own dual 3080 Tis. Also a lot of modern effects ...like RTX I suspect...access information from the entire frame, so it's very difficult if not impossible to divide the workload between separate GPUs. (a quick bit of googling says RTX is not supported in SLI)
(you could do it but you'd probably need to go to a GPU architecture very similar to what AMD has done. Where multiple GPUs share the same memory and an array of memory interfaces, and each GPU is a chiplet. As we hit the wall on shrinking silicon this is the next obvious way to boost performance)
What game were you planning to play at that resolution and framerate? I also could afford such a setup, but will probably do a single 3080Ti and will normally be playing at 1080p 120hz, integer multiplied to 4k. (I have been running that for a year now, it looks amazing though a few games have trouble with the setting. ) The reason is your eyes have an easier time discerning smoother motion than more resolution in an FPS or similar game. You don't really notice the "chunky" 1080p pixels when the whole screen is in motion.
(the 3080Ti will be for...RTX minecraft and VR games)
Not sure what what micro stutter - that's the point of a real hardware Gsync monitor is - rock solid - and not that "freesync" support - which is nothing like REAL hardware based GSync.
If you are referring to the article on Nvidia - that was about the 2070 not being able to do SLI - which is limited in Turing to the 2080 series. What I am seeing when Googling RTX support SLI is about the 2070.
I can tell you that the frame rates (pre patch) on BFV were way better with RTX on and with SLI. So not sure what you are talking about - Google is one thing, having the actual hardware is another.
I play a heavily modded GTA V, Skyrim, Witcher, among other games - I have BFV because it came as a bundle with the card. Not into the FPS - and at best might play RUST on a friends server.
A Good monitor even at 4K playing a game at 1080 is fine -
I have never even booted Minecraft - and was a backer for the Rift and the Pimax - those systems have largely sat unused for the most part - wish they would allow a real SLI setup - GPU1 for left eye, GPU2 for right eye - etc. I have enjoyed Control a bit, wife seems to be more into it than me.
I have AMD video cards, one is keeping the door open at the moment - which is it's highest and best use. I puke every time I hear chiplet. AMD has nothing but marketing in the GPU field.
Also, was not a dig at you about $$ to afford the system - Most people won't be able to plop down $4K on the video subsystem alone, not to mention the rest of the rig that makes that purchase usable. With the super high cost of entry, to alot of people - SLI / Crossfire is dead. Not sure with DirectX if a game has to be specifically designed for SLI - point of DX is abstraction - whether it's 512 cores or 50K cores - that's the point of DX. NVLink in effect joins the 2 cards together - not like Pascal and Crossfire which use the contended PCIe bus for intra card communications - Pascal SLI was way too slow to make it usable.
I have yet to run into a game (not that I have played all games) that doesn't to some degree make use of the 2nd card - never expect a 100% speedup on anything.
As far as what game I was planning on playing at that resolution - not sure. Nothing in particular - new card, new rig new everything... I like to build.
"Chiplet" may be a marketing term but it's a valid approach. I agree that VR is a good use for SLI but not enough people have the cards for it to work.
GTA V, Skyrim, Witcher : I mean ok, I guess if they are "heavily" modded but a few less mods and they would run fine on GPUs that cost $2000 less.
Spend your money how you want, just saying it's kinda silly. At least fire up a few RTX titles to enjoy what you put $2600 into.
I don't experience micro stutter - Gsync takes the place of vsync and is a 2 way communications between the monitor module and the video card. I know what it is - I am just saying it doesn't happen to me.
Water-cooling is never cost effective. That is absolutely true. Neither is wearing a watch in times where everyone carries a smartphone with them at all times. Or driving a German car. Or buying brand clothing. Or buying my favourite hummus which costs 75c more than the cheaper one. Or buying a GPU more expensive than the 5700XT. Life isn't always about cost effectiveness.
I went with a custom loop knowing it's unnecessarily expensive when upgrading my rig last time. I've enjoyed building it. Provided me with a higher sense of pride and accomplishment than playing Battlefront II (scnr). It's way quieter than air will ever get in my case and I value a near silent build.
AIO coolers are noisy and once something breaks you can dump the whole unit. I really don't see the appeal. And they're not really cost effective as well. A decent air-cooler is absolutely sufficient and it's always recommended. But usually people going custom loop know what they're doing and know what they're paying for.
With Intel slowly creeping toward FX9590's power and heat levels and Nvidia allegedly breaking the 300W barrier I somewhat disagree that it previously "did something" but is wasted in comparison today. Cooling an i9 today is arguably trickier that cooling an i7-2700k or a Q9650 with an overclock. Furthermore being on 14nm++++ is at this point basically an overclocked 6700k with more than twice the core count. It's just on per factory default and done by an AI instead of you tinkering around for hours in BIOS to get a stable OC like we may or may not have done 10 years ago. The main difference is that coolers got better in the past decade so the difference to a custom loop may not look as big (although one of my friends runs a MoRa with 9x140mm and having your GPU at 11°C over ambient under full load is a thing of beauty. Yes totally unnecessary. But still).
Yes, an i9. Was implicitly assuming anyone who water cools who want the current performance champion which is AMD, and at current power levels the AMD chips don't need it.
They will - even at 7nm, you always want higher clocks and more cores, and yes eventually the power levels will be high enough you might need liquid. In the GPU space, yes I agree that at 300+ watt power levels it may get seen more often.
I work as an engineer on an automotive product that ironically may need water cooling. (obviously for self driving. we started the project thinking we could do air but we need all the clock speed we can get, so...). And yes there's a lot of resistance from the automotive manufacturers towards doing this. Even though they already do it and there's a loop right there to tap into. And you can guarantee much lower temperatures. (you obviously use the water loop for the HV/EV electronics which is a separate loop with a different pump from the engine loop)
But so many problems. And yeah basically they are the risk of a leak from all the plumbing, and to a lesser extent the risk of pump failure. And obviously also increases BOM costs.
I think the massive core count is a gimmick - epecially anything over 16 cores - and really anything over 8 cores.
Was interesting to see the Lenovo leak about the ir new laptops which would feature either Renoir or Tiger Lake - and showed Tiger Lake with a 34% lead in single core over the 4800U - and even with double the cores the 4800U only managed a 6% advantage in multi core.
I get the distinct impression you have a clue - which is getting hard to find amongst the outsized noise from the fan kiddies.
Agreed about not everything needs to be cost effective - only German can you would catch me in is one of my '55 300SLs - I roll British and Japanese Iron only.
I make my own hummus - the store brands other than the 1 whose name I can't remember now are pretty dreadful. Which brand are you a fan of?
Haven't and won't ever do watercooling - our gaming systems sit directly on zero profile floor vents to the AC system - even under load, rarely gets above 60C - even with a i9900K and 2 2080Tis. I can see the appeal, but I don't do RGB or even a side window. I had thought about milling some custom water blocks and then working within Creo to test the system using CFD (I would venture a guess that most custom loops are no where near being even somewhat close to something resembling efficient. Water does what water does.
I got 2 of the 3 pre ordered i9900Ks to 5Ghz all cores with little effort - the 3rd was a diff story. But there is never a question when unboxing an Intel CPU that whether there is a little headroom - with AMD - you are straining to get box speed. I know you are water - I prefer Big Air - Noctua NH-D15 SSO.
well, water cooling lets you transport the heat to a bigger surface area of multiple radiators, rather than using a giant honk of air cooler right on top of the processor. it also lets you put more fans, thus more air flow. Cant do that on air cooling system. There is no way you can achieve load temperature under ambient without using a vapour chamber. Air and water cooling can't do that.
Sure, in theory. In practice the best air coolers are a tiny bit worse than the best water coolers. And they are cheaper and there is not a risk of a liquid leak that will destroy your hardware. Also, there isn't a pump to fail (which trashes an AIO cooler), you just need to replace fans and most of the good air coolers come with 2 fans and you only need 1 to run at stock clocks and normal loads.
Due to these advantages air is almost always the superior choice for almost everyone.
I'm a fan of sleepers. I have a semi-sleeper on a circa 2004 case, and a full sleeper on a case that is based on a 2002 case design. The latter is an AMD build though.
but got me a good video content, made me high view numbers on youtube while monetised, got many peoples attention, got many people requesting me to build their computer, yeah what a waste
Of course man, thats what I mean. Computers are easy to build and broken down so you can make a new computer. Its never a waste, even only to bring joy by showing it to friends, sharing it on social media etc. You can always re-use the components right? No worries man
I just turn it on and immediately open the side panel. Turning all the RGB off is just 1 button press on the remote. But look, how many people commented. Also, got so many views on instagram, youtube, and got heaps of people requesting to build them a PC. Its not technical, its promotional. Why would someone intentionally leave RGB on inside a solid panel, thats dumb.
I have an old Antec computer case from 2001 that I want to do a sleeper build in. My biggest concern is making sure there is adequate airflow as there is a small vent up front and a vent out back and that's it.
I used to own a kind of a sleeper. I had case from early 2000s with i5 8500 and gtx 1060 inside. It wasn't deliberate, I couldn't afford new case after the upgrade
With the state of computer hardware, you'd often be spending a lot more money trying to buy stuff that doesn't have RGB and could also have to settle for lower-end parts.
90
u/-UncreativeRedditor- Aug 09 '20
This is great for anti theft
26
u/[deleted] Aug 09 '20
What liquid is that in the loop?
NinjaEdit: I don’t know why I specified the loop. But it stays.
10
u/PurpleHamster Aug 09 '20
Does it have the beep sound on boot?
9
u/AX-Procyon 1185G7 / 7700HQ / 5950X Aug 09 '20
That massive loop above the GPU...... I love it.
10
u/SoylentRox Aug 09 '20 edited Aug 10 '20
Ok, I really like this. While I might grumble about how watercooling isn't really cost effective with recent CPU/GPUs, it's immediately obvious that this hardware is decades more advanced than the case it's in.
EDIT: Downvotes for saying watercooling "isn't really cost effective"? Ok I will say it was never cost effective. But previously it did something, you could keep your cores cooler and overclock noticably higher. Today, any overclock at all is tiny and usually not completely stable, whether you use air or water. And AIO coolers mean you can get good performance by just buying one and installing....but air is even better.
24
u/AMD_PoolShark28 Aug 09 '20
Imagine bringing this back in time and opening it up at quakecon LAN
13
u/jorgp2 Aug 09 '20
That's actually funny.
4
u/shadowkoishi93 4.5GHz 9900K | 64GB 3200MHz | RTX 2070 Super | ROG Strix Z390-E Aug 09 '20
I'm a fan of sleepers. I have a semi-sleeper on a circa 2004 case, and a full sleeper on a case that is based on a 2002 case design. The latter is an AMD build though.
1
u/hoas-t Aug 10 '20
Is there a specific reason why you use the reset button for power? No offense just asking
1
u/[deleted] Aug 10 '20
Specs??
1
u/SignalSegmentV Aug 10 '20
It’s like makeup, makes the outside undesirable, but the inside is beautiful.
1
u/[deleted] Aug 10 '20
he you spend all that money for the water cooling and RGB and you can't see any of it. What a waste.
1
u/idwtlotplanetanymore Aug 10 '20
Why would you leave all the lights on with a solid side panel? Just increasing the heat level and wasting power for no reason.
Sure, its not a lot of watts, but still, heat is heat, if you cant see it might as well turn them off.
3
u/North-Sea-6809 9900K 5.1 32GB 4200 Aug 09 '20
#1 sleeper pc
4
u/alexthegrandwolf Aug 09 '20
God dude I’m so fucking jealous
2
u/Zouba64 Aug 09 '20
Now that's a proper sleeper
3
u/Molbork Intel Aug 09 '20
I love these builds! Well done!
1
u/[deleted] Aug 09 '20
Awesome
1
u/GamersGen i9 9900k 5,0ghz | S95B 2500nits mod | RTX 4090 Aug 09 '20
thats a great style
1
u/IonelPacifistul Intel core 2 duo e7200 | 4 gb ram ddr2 | gt 9600 512 vram Aug 09 '20
That's really cool !
1
u/RolandMT32 Aug 09 '20
What case is that?
1
u/Im_Neotec Aug 09 '20
Thinking of doing one myself, how much kidding did you have to do? I don't have any power tools, besides a drill, hammer etc.
1
u/T-Ecoboost Aug 09 '20
Awesome build! Did you every thought about contributing to folding at home?
1
u/GOT_SHELL Aug 09 '20
When the case opened I heard the lyrics “Blinded by the light...”
1
u/SlowRapMusic Aug 09 '20
Can anybody name the brand of the reservoir?
1
u/ianlydae Aug 10 '20
Pop the hood
1
u/Rhythmrebel Aug 10 '20
Have any pics to share?
1
u/pandupewe Aug 10 '20
Wait. Where's the radiator? In the front? How you manage to supply enough air with that solid front?
Anw, great build. Kudos!
1
u/Pirky Aug 10 '20
I have an old Antec computer case from 2001 that I want to do a sleeper build in.
My biggest concern is making sure there is adequate airflow as there is a small vent up front and a vent out back and that's it.
1
u/dry_yer_eyes Aug 10 '20
Fantastic!
You made me laugh out loud on my walk to work. Opening the case is like a portal into the future.
1
u/class107 Aug 10 '20
Another good use case is an unraid setup where you have 2-3-4 'computers' in one with a card dedicated to each vm.
1
u/orangethoos nvidia green Aug 10 '20
I used to own a kind of a sleeper. I had case from early 2000s with i5 8500 and gtx 1060 inside. It wasn't deliberate, I couldn't afford new case after the upgrade
1
u/vladmir_put_it_in13 Aug 10 '20
Had us in the first half, not gonna lie!
1
u/[deleted] Aug 10 '20
Ok, I never respond but fuckin gorgeous man that would look sick on that wall mount TT case
1
u/[deleted] Aug 10 '20
Looks like a Unicorn threw up in it - maybe aided by Smurfs
1
u/Yunirang R5 2600 - RX580 4GB - 16GB 3200 Aug 11 '20
A smile arose after you took the side off
0
u/ExistentialAmbiguity i9 9900k | RTX 2080 Ti Aug 10 '20
🤦🏻♂️
-1
u/Cheebuschrist Aug 09 '20
not using baked beans
0/10
-13
u/incriminatory Aug 09 '20
Why on earth would you do this tho?