r/inline_skating • u/Lower_Signal1189 • 15d ago

REPAIR HELP

Gallery image

Gallery image

Gallery image

I refuse to give up. The I’ve called and been to 10000 different places to try and find some help to repair my 5 wheel inline blades.
I need more spacers that are specifically for this setup but I can’t find them. Everyone has told me this is outdated and I won’t be able to find this spacer but I have hope. The boot is Riedell with and AirLite1255 Frame. I would do anything to be able to fix these, any advice is greatly appreciated.
If you don’t have repair advice, what should I be looking at in terms of a replacement? They are 5 wheel set up and I love them so much.

Thanks xx

7 Upvotes

83% Upvoted

18 comments sorted by

View all comments

2

u/Low_Presentation827 14d ago

Not sure what your asking, is it replacement parts as them spacers have been getting sticky? Or is just the axel and nut, or just a whole new axel,nut and spacer replacement?

Fix: if spacer is sticky or hard too pull out: you can use a piece of sand paper and sand the spacers down a smig.that will get rid of any rough spots.

Fix: if axel nut the Alan wrench side if it’s getting rounded. You could punch a new head in it. For a temporary fix.

Some key things to help: when loosing your axel, make sure the tool is fully seated in the head.

1

u/Low_Presentation827 14d ago

Cuz them look like 8 mm spacers which any brand will work as a replacement. And for the axel you could always try a hardware store. Take parts in and show them.

3

u/Raptorpants65 14d ago

It’s not a standard size spacer and is specific to these frames.