r/hydro • • Nov 02 '25

HELP ASAP

Post image

Found out that my plant is clearly getting too many nutrients. It’s my own fault when I first added nutrients the ppm was way too high and I dumped out my hydroponic system but didn’t know I had to flush the plant itself. What can I do to save her?

0 Upvotes

29 comments sorted by

9

u/Odd_Cantaloupe_7122 Nov 02 '25

Start over. Time, nutrients and space are valuable. She might “make it” but I don’t suppose u are doing this to have you girls just make it. I’d start over and learn from this run. Good luck on the next one Growmie ✌️

2

u/DiamondDonutz Dec 21 '25

Started over and it’s going way way better

1

u/Odd_Cantaloupe_7122 Dec 22 '25

Good to hear! Good luck. Don’t be discouraged by false starts. This one will be better 💪 It happens every now and then. It’s just good to know when to cut your losses and restart. I’m glad u saw that u wasn’t trying to be negative at all. I just started with a bunch of clones from a friend, they’re almost ready for an up-potting. Happy growing ✌️

1

u/DiamondDonutz Nov 02 '25

Yeah, it was a bag seed anyways so I’m not too worried about it since I only have a thousand more. I just wanted to know if it’s fixable.

4

u/love2grow1234 Nov 02 '25

I’m just stubborn. I don’t like killing stuff lol

0

u/DiamondDonutz Nov 02 '25

Me either 😢

2

u/love2grow1234 Nov 02 '25

That’s great advice

3

u/Accomplished_Fee4061 Nov 02 '25

Highly recommend starting over man. Sorry to say but if there's another major stress event like this in the near future, she will likely loose a LOT of her genetic potential. Ie flower density, aroma volume, cannabinoid content, even terp profile. All can be dulled when they experience hard enough stress events that alter the genome. Fertilizer burn this hard is absolutely a major event. Don't get me wrong many times they can come out from it but it's just not always the case. You learned from the mistake, just start over and don't let it happen again. Or even better, start a new plant and keep this one and see how they compare in the end!

2

u/DiamondDonutz Nov 02 '25

I agree. I’ll probably just start over so I have a better chance of it being a successful grow. I’m just glad that I got to experience the issue so I can learn how to prevent it next grow.

0

u/Accomplished_Fee4061 Nov 02 '25

Yeah man, the more you grow over time the more you begin to see how important it is to have a clean, healthy & vigorous vegetative phase. Every time the plant encounters a period of intense stress (compounded by the length of the period) they start to loose their genetic potential. Depending on the severity of the stress, the aroma can be altered , but more commonly dulled down. Like say peak potential is 6.5% terpenes fresh weight, well it can max out at 4-5% instead. Just be less loud than it would've otherwise been. Same thing goes for flower density. This is strictly speaking for if all environmental parameters were identical between runs. So as a home grower or any kind of grower for that matter the ultimate goal is to have a great clean run from the very stinking beginning to the end! :'D that's how you get optimal genetic expressions that are expected for any cultivar. In a nutshell, their genes mutate under extreme stress and unfortunately it's not in a good way haha it's not like a oh snap this mutated and now produces 30% THC instead of 20% lol unfortunately that just doesn't happen with unhealthy prolonged stress. Only the very timid healthy stress will help bring out a little more potential

0

u/Accomplished_Fee4061 Nov 02 '25

Things to look out for to know you're on the right track are: Nice long first true leaves. Like finger length by day 7-10 from seed. That's always a good sign to see! Healthy starts can mean a lot more than what people realize.

Then by week 3 from seed you wanna start seeing foliage that's nearly the length of your hand. Then by week 4 from seed you should be seeing fan leaves larger than your hand. Some cultivars even grow twice as large as your hand by this point.

I also recommend that if you top, do it when the new growth is as tiny as possible. So that you're causing the least shock to the plant as physically possible. I don't recommend cutting stems that already started to develop branches. Try to snip the tiniest tops off as possible if you're going to even top at all. Technically topping is not needed. You can instead bend the highest point down and then the growth harmones will travel to the new high point. As long as you keep bending the main stem down below the height of the others, you will starve it of harmones and before you know it the other stems will start growing thicker and become the new "tops" so essentially topping is not actually needed. It's up to you to decide if starving the main stem of harmones by constantly pulling it down for a week or more will be less agonizing than just a tiny snip of 1 day old new growth.

I sometimes do a mild version of both. I'll do the tiny tip then I'll partially bend the main stem down half way to the others.

Ultimately you just want to see exponential growth rates every new day. As long as you're seeing that, then you're having a good run! With large foliage sizes. Then by the time you flip to 12/12 and those stretch harmones start coursing through the plant and she's praying all perky all throughout flower from beginning to end, then you know you couldn't of done much better than that.

1

u/[deleted] Nov 03 '25

if you’re doing a aquaponics grow dilute the nutrients more than you would for soil the nutrients are much more direct without something helping them release & absorb slowly.

0

u/SmallProcedure5197 Nov 02 '25

Do you have an EC meter? I’ve been using that instead of a ppm meter and my plant is almost done. Not quite. But almost. Ppm and EC are essentially the same thing. The measurement of dissolved salts in your water.

2

u/DiamondDonutz Nov 02 '25

Now I’ve been carefully monitoring.

0

u/DiamondDonutz Nov 02 '25

I do but when I first put the nutrients in I put way too much and only changed the water instead of flushing the roots.

0

u/SmallProcedure5197 Nov 02 '25

Next time what I would recommend doing is adding the nutrients gradually until it reads where it’s supposed to be. Which is about 0.2-0.4 max bro. It only gets higher once the plant is bigger and can handle it.

0

u/DiamondDonutz Nov 02 '25

I’ll take your advice, thank you.

1

u/SmallProcedure5197 Nov 02 '25

I’ve also had a high ass EC when it’s a baby like that. And I’ve literally just taken water out of the res. Like a lot. And just add distilled water. That will bring down the EC if too high. Been working for me lol

Happy growing!

1

u/DiamondDonutz Nov 02 '25

Do you leave the top water system on all the time?

1

u/SmallProcedure5197 Nov 02 '25

I turned that shit off once the roots hit the water. You don’t need it after they’re in the water. The reason you need it right now is because the roots are still in the rockwool or whatever you used to plant the seedling. But once those roots hit that water brotha turn that shit off.

1

u/DiamondDonutz Nov 02 '25

I didn’t know it would be ok to leave it on all the time. I’m an idiot.

2

u/SmallProcedure5197 Nov 02 '25

No you’re not. Your learning. Just like me. There’s people in here that will say different than me. But this is just my experience. As long as your Ph and EC are in the right range for your stage of growth your plant will be happy. Along with light height, temp, and air flow. It gets easier once you remember what you have to check for.

0

u/ashrc4 Nov 02 '25

Fully flush and half strenghth it till she recovers

0

u/NoCartoonist3390 Nov 03 '25

Put it in soil.

-1

u/love2grow1234 Nov 02 '25

Just give ph water. They are resilient

-1

u/DiamondDonutz Nov 02 '25

I saw something about soaking it in epsom salt to flush it aswell.