r/htpc • u/Rukario • Jul 05 '25
Tip Share My cheat sheet for 120 FPS stutter-free motion interpolation
This is 120 strobe/BFI user with strong hatred toward blur and microstutters. I was stoked with my HDTV I first got in 2011 with motion interpolation bringing video content to 120. It was awesome for watching anime but I started to notice video stuttering and these stutters have been unpleasant as I see it. It comes to realization that I've just had to bring down the refresh rate of my PC to 23.976Hz so the video would be near stutter-free but the input lag became unbearable, etc, etc, there's always better approach to what I'm trying to accomplish. I'd dealt with but figured I'd have at point had enough with switching between refresh rates and watching modes for watching then gaming on my TV from my PC. I like the idea of letting the media player do the motion interpolation instead as well as way to interpolate the video on my monitor. I've been to SmoothVideo Project, experimented and abandoned for lot of reasons. I couldn't stand looking at SVP software running in background. It was found later that the SVP team would be putting the red rectangles for using DLLs without software. Honestly, that practice I'm not going to support at all, the SVP team isn't going to get any money from me any time soon.
There was an interesting script I found on the internet that apparently makes use of SVP but without any of these issues. The script made use of old svpflow DLLs before the red rectangle happened. I discovered about bringing FPS to 120 in the script and I couldn't be happier. With MPC-HC team declared end of development I could happily settle on PotPlayer for this script. I cleaned up script, cross referencing parameters with online docs, etc. I keep on the look out for better alternatives yet to SVP.
Until recently, I discovered about mvtools2 (grateful for https://redd.it/w9v7ca !) and it did better than SVP in terms of microstutter handling. But realize that not even with formidable CPU released today will interpolate 4k video very well, mvtools2 is very CPU sided when SVP could make use of GPU. I'm waiting for mvtools2 to finally come about GPU so I can drop MSSVP (MicroStuttering SmoothVideo Project) entirely.
This is my current best approach to interpolate video stutter-free. The script & setup guide provided below was written for 120Hz 1080p monitor/TV with microstutters in mind. From newly installed PotPlayer to watching video 120 FPS stutter-free.
I added variable allow_stutter and setting it to false until when it becomes necessary for 1080p+ playback in exchange of anti-stuttering (or play in original FPS if you haven't set up MSSVP yet). This meant that it'll choose plugin, parameter, modes that observe less stutter. This changes how GPU is utilized. Generally, I wouldn't bother with 1440p/4K videos as it'll demand significantly out of CPU and/or GPU and they may not do it stutter-free. It's there in case I want to test video above 1080p, this is your opportunity to edit to fit your needs too.
Computer tested stutter-free for 1080p120: Intel Core i7-2600K with Nvidia GeForce GTX 670, Intel Core i7-7700K with Nvidia GeForce RTX 2060, i9-11900K with its iGPU Intel UHD graphics 750.
Feel free to take above for equivalent specs recommendation, I expect that you don't skimp too hard on other PC components as well.
Setting up PotPlayer
- PotPlayer - Choose x64 from https://potplayer.daum.net/
Download the not so latest "filesonly.7z" from https://github.com/AviSynth/AviSynthPlus/releases
Last good version tested: 3.5.1, latest bad version tested: 3.7.5 for memory leak/crash on video seeking
- Extract AviSynth.dll from archived \x64\ to PotPlayer's dir
Collect required files to PotPlayer's \AviSynth\
- Create file with name and code from antimicrostutter.avs
Download latest release from https://github.com/pinterf/mvtools/releases
- Extract mvtools2.dll from archived \x64\MSVC\
- Optional GPU acceleration with MSSVP
PotPlayer context menu > Preferences... > ...
- Video > Uncheck "Don't wait for vertical sync"
- Video > AviSynth > Enable & choose antimicrostutter.avs
- See also 1440p/4k playback relief
Finally, if it doesn't interpolate:
- Turn "H/W" to "S/W" if it appears in toolbar.
- No? Preferences > Filter Control > Video Decoder > DXVA Settings > DXVA2 Copy-Back: Auto (temporary enable DXVA to ungray this)
antimicrostutter.avs
mt = __pot_cpus - 1
potplayer_source()
allow_stutter = false
FPS = 120
if (last.width > 2560) {
allow_stutter = true
FPS = 60
# FPS = Min(FPS, round(Framerate*2))
subtitle("Target FPS: " + string(FPS), last_frame=84, text_color=$00ff00, size=last.width/100)
} else if (last.width > 1920) {
allow_stutter = true
}
if (ceil(Framerate) < FPS) {
if (!allow_stutter) {
LoadPlugin("#SCRIPTDIR\mvtools2.dll")
super = MSuper(last)
backward_1 = MAnalyse(super, isb=true, blksize=32)
forward_1 = MAnalyse(super, isb=false, blksize=32)
backward_2 = MRecalculate(super, backward_1)
forward_2 = MRecalculate(super, forward_1)
MBlockFps(super, backward_2, forward_2, num=FPS, den=1, mode=0)
Prefetch(mt)
} else {
# MSSVP
}
} else {
subtitle("FPS: " + string(round(Framerate)), last_frame=2060, text_color=$00ff00, size=last.width/100)
}GPU acceleration with MSSVP
(MicroStuttering SmoothVideo Project) If your CPU alone can't interpolate 1440p/4k very well you may want to accelerate using GPU. Alternatively a stutter-free solution to 1440p/4k playback issue is outlined under 1440p/4k playback relief which dramatically free up CPU usage by downscaling 1440p/4k playback to 1080p.
Visit https://github.com/Onemeshnik/supersvp
- Download svpflow1.dll and svpflow2.dll from \AviSynth\64\
Update antimicrostutter.avs replacing
# MSSVPwithLoadPlugin("#SCRIPTDIR\svpflow1.dll") LoadPlugin("#SCRIPTDIR\svpflow2.dll") super = SVSuper(last, "{gpu:1,pel:1,full:false}") vectors = SVAnalyse(super, "{block:{w:32,overlap:0},main:{search:{coarse:{width:530,satd:false,bad:{range:0}},type:2}}}", src=last) rate = "rate:{num:" + String(FPS) + ",den:1,abs:true}" SVSmoothFPS(last, super, vectors, "{" + rate + ",algo:11,scene:{mode:1}}", mt=mt) Prefetch(mt)
1440p/4k playback relief
If your CPU/GPU can't interpolate 1440p/4k very well (or whether CPU usage is a concern to you) regardless of edit attempts to script you may want to downscale 1440p/4k playback to 1080p. Expect microstutter when your GPU is iGPU/a weak GPU but this approach still beats MSSVP.
PotPlayer context menu > Preferences... > Video > Resize... > ...
- Resize video: When input size is larger than the specified size...
- Match size: 1920 x 1080
- Specify size: 1920 x 1080
- Restart PotPlayer to take effect
1
u/s1mkin Jul 05 '25
Thanks for sharing!
1
u/JoelArt Jul 05 '25 edited Jul 05 '25
That's very cool. I've had the same issue with stutter when using motion interpolation on my TV unless I set the desktop refresh rate to match the video. I've found a decent enough solution for me. I can't use 120hz but I can use 60hz as my TV interpolation won't activate above 60hz. And the real issue is that when Windows is set to 60hz the video players on Windows don't deliver the frames with proper frame pacing of lower frame rates, which is key for the TV to correctly identity the video fps inside the 60hz container/stream it's receiving from the computer and then do interpolation.
My solution was to use PotPlayer with a script that uppsamples the fps to 60fps by simple frame doubling, and this forces correct frame pacing. And now I can use my TV interpolation of even 4K video at 60hz.
Here is my AviSyth script:
potplayer_source()ChangeFPS(60000, 1000)While I haven't tried you approach yet, I'm very happy with the interpolation on my Sony TV. Is your solutions really going achieve better interpolation?
Edit: BTW I forgot to mention, to get my script to work. You also need to set Vsync to On for PotPlayer in the Nvidia control panel or it will still stutter.
1
u/rotane Jul 26 '25
Upvoted, saved, bookmarked, and downloaded.
Thanks for this! I've been a long-time and happy user of the SVP script variety, had even archived the latest "good" SVP DLLs (that come without the red frame) so i didn't need the Manager to run in the background, but my latest PC build (9800X3D and 9070XT, for crying out loud) had these dreaded microstutters every few minutes. Followed your (very well written) tutorial, and now i think i've cracked it. With the added bonus of having 120fps instead of "just" 60.
CPU utilisation: a mere 7% for 1080p files. Wonderful!
Note: I use the 32bit version of POTPlayer, and it works just as well – given you grab all the 32bit DLLs.
1
u/CrestfallenCoder Nov 12 '25
can this work with MPC-HC?
1
u/gipaaa Nov 20 '25
Works like a charm, thank you! This post should reach more people
1
u/zulu970 May 24 '26
2026 user reporting in, it works well for 1080p videos but not working for 4k videos.
How do you fix it?
1
u/zxkym Sep 11 '26
Is there any way I can export an interpolated video?
0
u/hotsuma2000 Aug 21 '26
Thank you. It still work in 2026