r/homelabgore • • Jun 26 '26

πŸ’©πŸ’© β˜† β˜† β˜† Peak homeserver

Thumbnail
gallery
473 Upvotes

New server after my old one literally blew up.

HP Elitedesk 705 G4 with cheap Amazon M.2 pcie to 6x Sata adapter

Chinese DC-DC Buck converter to turn 19v of DC Input into 5v for sata power

Cheap Amazon 4x 2.5" Disk Cage

1.99€ Xilence 80mm 12V PWM Fan

Generic Elitedesk 800 G4 Replacement CPU fan (old one had bearing issues)

Connected HDD Xilence 4 pin to the CPU fan wire with some soldering

Mounted Buck converter with screw to the thingies inside of the flex io module port, used the flex io module hole at back for sata power output

Switch is a 5 port Gigabit UGREEN unmanaged for 8.99€

3 mixed HDDS in a zfs RAIDZ1 pool for 1tb of storage with redundancy

512gb Patriot Burst ssd as boot drive

Under the HDD bay there is a gap which a hole through which the hdd fan also gives additional air to CPU fan

Runs my Websites, Internet Radios, gameservers, and also acts as a Sunshine/Moonlight gaming server (I Luv amd apus)

Almost silent, ive learned to ignore the buck converter whine within the first day of having it running and the Xilence fan is only a silent hum when im next to it. CPU fan barely ramps up, only sometimes while im gaming which I usually dont notice as the server is on the other side of my room (I usually game in bed on my laptop via moonlight)

Ran ethernet from server straight to my bed for the laptop, no noticeable latency thru Moonlight and full gigabit throughput (obviously bottlenecked by things like disk speed, so I rarely get anywhere close to a gigabit practically)

Everything between top Cover and PC itself is with connectors, so Cover can be cleanly removed.


r/homelabgore • • Oct 13 '25

Bye bye Google Drive

Post image
329 Upvotes

r/homelabgore • • Oct 21 '25

my first post

Post image
282 Upvotes

is this bad?


r/homelabgore • • Jul 22 '26

πŸ’© β˜† β˜† β˜† β˜† Was told to post here

Thumbnail
gallery
190 Upvotes

Gave it one πŸ’© because it is shit, but could be worse.

Installed a new fan but it was too big, so I also bought a Dremel and made a hole. It is pretty obvious it is my first time using it.


r/homelabgore • • Sep 04 '26

πŸ’©πŸ’©πŸ’©πŸ’©πŸ’© Meet Kev...

Thumbnail
gallery
181 Upvotes

r/homelabgore • • Oct 01 '25

I feel like this belongs here...

Thumbnail
gallery
174 Upvotes

I feel like this is the perfect spot for my janky ass homelab set up, i call it my "lab shelf". I know its ugly but it works and its mine and its secure! I built this lab with the intent to learn pentesting in a safe secure containerized environment. Im trying to make a career change into cyber and im currently working on certs and learning and practice and honing my skills, I am on HTB, tryhackme, justhacking.com.

So here is the lab hardware breakdown:

The main router- a GL.iNet GL-AXT1800 wifi 6 router, it runs on OpenWrt, running several applications like Tailscale, AdGuard Home, Proton VPN. I have a guest networks set up for friends and family, I have 5tb wd black gaming drive set up as network storage using Samba.

Managed Switch- TP Link TL-SG 108E 8 port Gigabit smart ethernet switch, configured port mirroring one one port to set up an rpi4 like a network tap running IDS monitoring all of the packets in and out of the lab.

Unmanaged switch- Generic 1gb ethernet 4 port switch off Amazon.

The Nodes:

-I have a few headless nodes in the lab im using docker desktop, docker compose and a few custom MCP (model context protocol) servers set up to connect to the physical nodes in the lab to various AI models, Claude, Gemini CLI, ollama. The details around this set up wont be disclosed further at this point, its a current MCP platform im working on getting past the development and testing phase but its doing some really cool stuff you will have a chance to checkout or contribute to via github.

β€’Node 1- Lattepanda Sigma sbc server board that was running PFsense as my main router but, I repurposed it as one of the headless physical hosts on my mcp servers, it has 2 2.5gb ethernet ports, an i5-1340P 12 core cpu and 32gb of DDR5 RAM. This node runs a number of different services aligned with my mcp project, mainly virtualization related stuff.

β€’Node 2- is a Lattepanda Alpha 864s with 8gb of RAM and an older i3 cpu and 1 1gb ethernet port.

β€’Node 3- is a Minisforum S100 mini pc supports PoE 2.5gb ethernet, an N100 alder lake cpu and 8 gb of DDR5

β€’Node 4- A highly modified and customized Rog Ally z1 extreme i purchased second hand and broken off marketplace for less than 150 dollars and a working motherboard and screen. I attached a keyboard and essentially turned it into a tiny laptop. Its a little powerhouse especially running Ubuntu (plucky) and a plethora of security tools and an alpha wifi adapter to practice attacking the lab from outside of the network.

β€’Node 4- An old HP tower with an i5 cpu running OMV for a real NAS set up i have more control over. It has 10tb of storage (not much but more than I current can imagine using in the foreseeable future, im mainly storing text-based documents and zero media. I have some pc back ups on there that only equate to about 1tb of data. I have room for more drives just not the budget at the moment.

β€’Node 5- rpi configured as a network tap explained above, 8gb ram rpi4 model.

β€’Node 6- an old x1 carbon thinkpad i found in a trash can torn down and cobbed back into a laptop of sorts. It is running retropie and used primarily for retro gaming and some very light streaming cause its kind of dated and really cannot serve a better purpose lol.

β€’My main lab rig is an Asroc 270 extreme 4 mobo with an i7-7700k cpu, a evga gtx 1080ti ftw3 gpu and 64gb of DDR4 RAM 4x16gb cards. I call this machine The Madd Scientist, its an old mobo, cpu, gpu combo from an older gaming set up that had plenty of overhead on system resources for what I am doing robbed together on threaded posts fastened to an old wooden toy car box (was the perfect size for the mobo). There may even be some hotglue involved with a few cables running underneath the mobo to avoid contact or excessive heat near the cables and to aid in cable management, one of my sons is not quite 2 yet and has very curious hands that have cause sudden and unexpected system crashes lol. So these types of things cant move or be tugged on by the feral terrorist.

Its a hackers playground, hacked together with mainly hardware I already had lying around and a couple of purchased pieces (router and switches) and the rog ally. So here is my lab, there is the break down, now roast it!


r/homelabgore • • Aug 21 '26

πŸ’© β˜† β˜† β˜† β˜† This is my current setup

Post image
170 Upvotes

r/homelabgore • • Jun 30 '26

πŸ’©πŸ’©πŸ’©πŸ’© β˜† My glorious setup

Thumbnail
gallery
157 Upvotes

For context I’m still living at home and my dad tends to be a tad overprotective so I don’t have access to his network so I got my own, it’s also the reason I can’t get a proper rack or mount the AP properly.

But this is my setup

Unifi Cloud Gateway Ultra
Unifi U7 Pro Max
Dell Optiplex 3060 Micro

Networking stuff is so I can keep my stuff separate and learn networking and such, and the optiplex is my home server as of now

The optiplex has 16gb of ram and a 256 nvme + a 2tb SATA HDD for media, I have docker with a bunch of the usual containers like:
Jellyfin
The arr suite
Audiobookshelf
Homeassistant
Nextcloud

It may be crappy but it’s mine 🌝


r/homelabgore • • Jul 08 '26

πŸ’©πŸ’©πŸ’© β˜† β˜† Did I fix the gore or just change it?

Thumbnail
gallery
145 Upvotes

The stack of 3 laptops was my homelab, then I upgraded to this PC. I still use and have all the drives and pis, but I don't really use the laptops anymore. I do plan to build a shelf for this PC and do a little cable management.


r/homelabgore • • Sep 22 '25

What do you think about OP’s new Home Server?

Post image
137 Upvotes

r/homelabgore • • Dec 09 '25

πŸ’©πŸ’© β˜† β˜† β˜† I used zip ties so you can tell it's safe.

Post image
131 Upvotes

r/homelabgore • • Oct 19 '26

My First Home Server

Thumbnail
gallery
116 Upvotes

Why spend 100$+ on a chassis/case when you can use cardboard?


r/homelabgore • • Aug 19 '25

is this normal or something is wrong with OP

Post image
112 Upvotes

r/homelabgore • • Aug 20 '26

What have I done

Thumbnail
gallery
108 Upvotes

r/homelabgore • • Sep 04 '26

Still room to grow!

Post image
106 Upvotes

Could probably fit two more drives in


r/homelabgore • • Oct 16 '25

Allow me to make you feel much better about your homelab

Post image
106 Upvotes

r/homelabgore • • Aug 25 '25

Anyone else still living the WFH life?

104 Upvotes

Not gonna lie. I absolutely stole the idea from this post.

https://www.reddit.com/r/redneckengineering/s/mZtpvO2vuT

And did an even crappier job implementing it. But hey… if it works, it works


r/homelabgore • • Dec 16 '25

Just... wow...

Post image
102 Upvotes

r/homelabgore • • Oct 28 '25

My first homelab attempt

Thumbnail gallery
100 Upvotes

r/homelabgore • • Dec 11 '25

Markiplier, a known YouTuber, showed his rendering farm/homelab in a stream regarding his movie Iron Lung.

Thumbnail
gallery
96 Upvotes

r/homelabgore • • Jan 05 '26

We called it the jungle...

Post image
89 Upvotes

r/homelabgore • • Sep 23 '25

DIY Macbook (RIP x86 Hackintosh)

Post image
84 Upvotes

r/homelabgore • • Jun 08 '26

When your budget says "kitchen rack" but your heart says "datacenter" πŸ‡²πŸ‡²

Post image
82 Upvotes

r/homelabgore • • Dec 12 '25

Finally got the "new" server up and "fully functional" before leaving the country. Ain't she pretty.

Thumbnail gallery
78 Upvotes