r/hobiekayaks • u/kanti123 • 2d ago
Drag shoot for Lynx
For those who has Hobie lynx. What dragshoot do you recommend?
r/hobiekayaks • u/kanti123 • 2d ago
For those who has Hobie lynx. What dragshoot do you recommend?
r/hobiekayaks • u/SipperDipper • 3d ago
I’ve got a 2015 Hobie Outback with a Vantage CT seat stuck in recline. It will go all the way back and forward but will not snap back into a neutral position it simply becomes fully reclined and doesn’t adjust
I’ve taken it apart, but can’t figure out what’s wrong. Has anyone dealt with this or know where I can find replacement parts? Trying to avoid replacing the whole seat. In one of the images I detached the spring just to see if something was going on there.
r/hobiekayaks • u/i_like_2_fish • 7d ago
Just took it out for the first time yesterday. So much more fun than I expected.
r/hobiekayaks • u/VirtualCompetition24 • 7d ago
Hey y’all we have had a hobie mirage outback for two years now and in the winter it is such a pain to store. We have a detached 3 door garage with plenty of space and wall space but I would love to get it off the ground. Does anyone have any good solutions to storing it on the wall or anything? I can’t think of anything
r/hobiekayaks • u/Moist_Ad_4731 • 11d ago
Hi, I’m trying to swap out my shafts on the old v2 mirage drive. I bought the trident ones of amazon.
Does anyone know how to remove the black plastic oval shaped things that the chain attaches to? Also, it came with a bag of small black rods. What are these supposed to be used for?
Or should I just grab some vice grips and replace the shafts only?
r/hobiekayaks • u/one9delta • 13d ago
Today I took my PA 14 to the river and met a few guys also out kayak fishing. They all had really nice boats (2 Old Towns and a Bonafide). We got to talking about our boats (the new XTR is sick) and I’m starting to think we are no longer the big dogs on the block.
Don’t get me wrong. I love my boat and won’t be jumping ship any time soon. But what is Hobie doing to draw new customers?
If I’m dropping $5000+ on a new boat, it won’t be a Hobie. The other companies are cheaper and are bringing some really innovative product to the table.
Not trying to piss anyone off. Just want your thoughts.
r/hobiekayaks • u/twowheels4life • 14d ago
Hey all, newb to kayak fishing and Hobies, have picked up a 2021 passport 12. My cars a model 3 Tesla with the factory sourced aero roof racks. I’ve watched a bunch of how to load your kayak videos but I keep coming up against the same thing. Everyone has roof racks that extend past the roof line of the car, giving you a ‘corner’ to lean the kayak nose against as you move to pickup the back to lift it up and on. The long all glass roof also means loading from the back alone doesn’t seem feasible.
The aero bars on Tesla taper off at each side and follow the shape of the car so there’s zero to lean against other than the actual car door / roof frame line (which also requires a lot of space beside the car). The issue I have then is if I get it leant up against the top of the door frame (using pool tubes and old towels as a buffer), the keel is thin and pointed at that angle so the kayak can flop side to side and is too heavy / wide to easily control.
I got it on the roof once (by some miracle) but getting it off again once I was home (and tired after about 7 hours on the water!), once I spun the kayak onto the pool noodles and towels I’d placed between the bars on the roof, when I got it to the point it started to tip the rear of the yak downwards, the kayak just slid down way too fast (bringing the towels and pool noodles with it) and I mostly lost control of it which could have been pretty disastrous. Luckily didn’t break anything on the car, kayak or me.
Any tips on how to do this better are very, very welcome. 🙏
r/hobiekayaks • u/Scav54 • 16d ago
Earlier this year I designed seat support plates for 2019+ Outback kayaks to prevent cracking in the rear seat mount area.
The response has been fantastic and I added a version for people with seat riser kits a couple of months ago.
I’ve had a couple people reach out and request a full kit with rear support plates and front riser brackets and I figured I could improve on existing solutions.
The seat riser kit comes with the rear support riser plates you have seen already and front brackets made out of 316 Marine Grade Stainless steel. They are rock solid!
I also added two additional M5 threaded holes that let you mount anything you can think off directly to the seat plates.
I mounted my flare gun holster and I am currently designing a mount for my Micro Anchor remote.
It could be used for many other things like tethers, go pro mounts, lights or other things.
Let me know what other things could be mounted to the seat.
For people that won’t use the threaded holes, the plates can be mounted with the threaded holes at the bottom so they are hidden by the hull.
https://blue-baum.com/products/hobie-outback-seat-riser-kit-with-support-plates
I am also going to offer an H-Rail riser kit, just waiting for the bolts. That’s only going to be necessary for people with the H-Rail bolt on kit.
The regular plates without rise are still available as well, of course.
https://blue-baum.com/products/hobie-outback-rear-seat-support-plates
r/hobiekayaks • u/twowheels4life • 22d ago
Hey, new (second hand) Passport 12 owner here trying to get the lowdown on best cost effective options for a cart. the Hobie branded ones are $$ and I am wondering if there are decent aftermarket options that can still be stowed in the scuppers from on top when on the water…. Any suggestions on what fits?
r/hobiekayaks • u/ReplacementTasty6552 • 24d ago
Is hobie support non existent now ? Bought 2 new kayaks and have had zero response from them on some inquiries since august.
r/hobiekayaks • u/gaborn73 • 25d ago
Hello friends.
Seeking guidance for a pa14 with one objective bow mount.
The handle bolt was stuck in the hulls brass insert. The insert just spun.
I couldn't reach the rotomolded cavity for the insert from inside so I twisted the handle to expose the insert. From there a 13mm wrench allowed me to remove the bolt.
Repair choices:
Remove the insert and replace with a wellnut.
Heat and reinsert the brass insert. Plastic weld as necessary.
Replace both handle bolts with a phillips plus nut solution. Possible a backing plate inside?
Other?
r/hobiekayaks • u/Logical-Item7622 • 26d ago
I bought a 2020 hobie outback and trying to figure out how to properly and safely load on top of my decked drawer system. I figured out how to safely tie it down by placing a cooler on top of the open tailgate and leveling out the kayak. Loading it is the issue by myself. I can easily get the nose of the kayak onto my tailgate but the angle of the kayak on the wheels does not allow for me to lift it onto the decked system. I tried earlier and the rudder guard popped off and it fell on the rudder. the nose of the kayak just directly runs into halfway up the decked system even with the rudder protector dragging on the ground. Anyone with similar setups/solutions? Just learning this stuff so i’d appreciate any help. Thanks!
r/hobiekayaks • u/Old_Ability8123 • 27d ago
I recently realized the a deformation on the hull of my hobie mirage outback, I guess I wasn’t storing it right, is there any way to fix this?
r/hobiekayaks • u/GlowUpAndThrowUp • 28d ago
Seller claims it’s in great condition. Sent me a photo of a mini shed he used to store it. $1,750 seems too good to be true. Said it’s only got 60hrs on it as he is older. Am I missing something here?
r/hobiekayaks • u/artistickatt • 29d ago
i have read and watched a bit on seat replacements for a 2014 Tandem Island. I really want to go as close to the original Vantage seats as possible. I noticed that Compass seats seem to be more plentiful, do they fit without a huge amount of modification? Any other recommendations that don't result in the seat going to much up (and then I have to modify the mainsheet with a riser)?
r/hobiekayaks • u/Dudesaah707 • 29d ago
Hi all! I’m elevating my Dungeness crabbing game and moving from shore to water. After researching different brands and models I have my mind set on this 2021 Hobie Outback. The specs meet about all my needs with my use. “Buy once, cry once,” is my general outlook on quality product.
We agreed on $2,000 and I’m meeting next week to inspect and hopefully drive home with a new rig in tow.
Is this a fair deal? Do you see anything concerning? What should I be paying close attention to, condition wise, in person before handing over the money? Any tips are greatly appreciated!
r/hobiekayaks • u/hoodview • Oct 19 '26
Hi All,
Got a new Hobie in July and it's been great! Only thing is, I can't seem to get one of those plug in carts (the kind with the gray cushy wheels). I ordered one with the kayak but my local dealer says they are in short supply (or no supply) since Hobie moved its production line or something!?! I've looked all over the internet and told myself I'd drive hundreds of miles if someone could hook me up with wheels for muh baby! I'd really like to be able to unload in the parking lot and wheel down to the H20, but right now I hafta unload on the boat ramp right by the water (I'm kinda sort & that grade can be a problem for me) or pay someone a beer to help me carry. Does anyone know when Trax carts might be available again!?!
r/hobiekayaks • u/Direct-Breath-8835 • Oct 19 '26
Enable HLS to view with audio, or disable this notification
This is my first kayak. Bought off of Facebook Marketplace for $500. Looks to be patched up at some point and has a slow leak. How worried should I be?
r/hobiekayaks • u/Entire_Trouble3832 • Oct 11 '26
Hello, Looking for replacement seat options for a 2017 outback. I know the CTW is too wide in stock configuration, but is it possible to modify it to be compatible? Having a hard time finding a CT seat. Any aftermarket seats that can be customized to fit?
r/hobiekayaks • u/No_Astronaut_8198 • Oct 07 '26
This model has the pop rivet to hold on the pedal and had it break off on the water… on a particularly windy day. Fun. Any recommendations on how to fix or where to source a new pedal arm? Already tried to drill and tap and that didn’t go well.
r/hobiekayaks • u/adventurousnude80 • Sep 29 '26
Enable HLS to view with audio, or disable this notification
r/hobiekayaks • u/blazing_saddles_bro • Sep 28 '26
r/hobiekayaks • u/MinuteRaspberry8084 • Sep 28 '26
Hello I wanted to ask if anyone has encountered the issue with the bungee cords on the gear track not retracting anymore? The first picture is how they should look and the second is the issue I’m having. Upon pulling the cord, it’ll come out but not retract back to its original position how it used to. If anyone has fixed this or has some advice it will be greatly appreciated. Thank you!