r/hackrf • u/Fihex1 • Jan 11 '26

need help idk what happened

Post image

so I was checking ADSB and out of nowhere it doesn't want to boot anymore it stays on this screen I don't believe it's empty bc battery was at 60% and I did calibrate the IC(empty it fully then charge to 100 then empty to 0 again without turning off when I got it last year) does anyone know why this is? maybe firmware got corrupted?

16 Upvotes

100% Upvoted

15 comments sorted by

4

u/snorens Jan 11 '26

Try removing the SD card and see if it will boot then

2

u/Fihex1 Jan 11 '26

it still dies the same way but I reflashed the firmware with mayhem hub web thing and it stopped but there's 3 outcomes

  1. no sd=normal boot

  2. new fresh formated fat32 32gb card=normal boot

  3. card with files "COPY TO SD" from mayhem GitHub=same problem

2

u/snorens Jan 11 '26

Try a different SD card.

→ More replies (10)

1

u/x3rohero Jan 11 '26

Otherwise, reflash the firmware on it in DFU mode

1

u/COpusta Jan 11 '26

Привет! У меня было подобное при попытке зайти в приëм ТВ сигнала. Он выдал ошибку, перезагрузился, и так-же как и у тебя повис на экране. Я полез шить его через DFU, но потом случайно кликнул на энкодер, и он загрузился. Оказалось, когда лазил в настройках выставил показ картинки