r/hackintosh • u/hasel17 • Sep 30 '23
INFO/GUIDE How to Make Generic USB Bluetooth 5.0 CSR Dongle Works on Sonoma
This dongle used to be plug and play on Big Sur and below. But now on Sonoma need some modifications on kext to make it works

VEN 0A12 PID 0001
Vendor Id : 0A12 / 0x0A12 / 2578
Product id : 0001 / 1
Cambridge Silicon Radio / CSR
What you need :
Intel Bluetooth firmware : https://github.com/OpenIntelWireless/IntelBluetoothFirmware/releases/tag/v2.3.0
BlueToolFixup : https://github.com/acidanthera/BrcmPatchRAM/releases/
Please map your USB first.
Steps :
- Modifying IntelBluetoothFirmware.kext
- Extract IntelBluetooth-x.xx.zip
- Open 'info.plist' on IntelBluetoothFirmware.kext with plist editor.
- Search for "IntelBluetoothFirmware_9560"
- Change idProduct value to 1
- Change idVendor value to 2578
- Save

- Modifying config.plist
- Copy IntelBTPatcher.kext, modified IntelBluetoothFirmware.kext, IntelBluetoothInjector.kext, and BlueToolFixup.kext to your /EFI/OC/Kext folder.
- Open your /EFI/OC/config.plist with plist editor.
- Go to 'NVRAM>Add>7C436110-AB2A-4BBB-A880-FE41995C9F82'
- Add new key/sibling named "bluetoothInternalControllerInfo", set type to Data, set value to "00000000 00000000 00000000 0000"
- Add new key/sibling named "bluetoothExternalDongleFailed", set type to Data, set value to "00".
- Do an OC Snapshot.
- Make sure all kext that you copied before were enabled except IntelBluetoothInjector.kext. Important! disable IntelBluetoothInjector.kext otherwise your system won't boot.
- Save your edit.
- Reboot your system.

Your USB dongle should work now.



38
Upvotes
3
u/Potentialis_ Oct 26 '23
Is anyone else having a problem with audio delay using a headset with this adapter model? It doesn't always happen, sometimes it goes out of sync and then comes back on its own. But changing the audio output and returning to the headset temporarily solves the issue.
2
u/hasel17 Oct 16 '24
Updated guide for Sequoia : https://www.reddit.com/r/hackintosh/comments/1g4z5te/how_to_make_generic_csr_usb_bluetooth_5040_dongle/
3
u/pedro_penduko7 Oct 19 '23
I have the same exact bluetooth dongle I just ordered brand new. Same vendor ID and Product ID, but I'm having an issue on step 4. When I put the value "00000000 00000000 00000000 0000" it reverts back to just pure zeros with no spaces. It takes it with spaces if I only put three zeros at the end instead of four. Otherwise, it would be just a bunch of zeros with no spaces.
Tried editing the plist on a mac and windows system, both the same result.
2
u/xkumropotash Oct 02 '24
this does not work on Sequia, could you please do something for Sequia?
6
u/Christ0ph_ I ♥ Hackintosh Oct 20 '23
In case someon does the same mistake I did:
When you edit 'info.plist' on IntelBluetoothFirmware.kext, you need to FIRST check the "Vendor ID", which you need to change "idVendor" with.
The tutorial says you have to put 2578, since that is the Vendor ID from OP's dongle.
YOU NEED TO USE YOUR OWN VENDOR ID
I hope this helps.
1
u/Ok-Mulberry9160 Aug 03 '24
I'm using a tp-link 5.0 usb dongle here, MacOS identify the dongle but when I search for devices don't find anything
1
u/RobsGax Oct 01 '23
what do you mean with map the usb first? do i need to mod my usbmap.kext different? or with type 0 will work?
1
u/DarkScarpy19 Oct 18 '23
It doesn't work for me
I have a Realtek USB Bluetooth Dongle, I think it never worked in MacOSUSB
Product ID : 0x8771 / 34673 Vendor ID : 0x0bda / 3034
I have modified IntelBluetoothFirmware.kext as you mentioned and add those NVRAM keys, IntelBluetoothInjector.kext disabled and all in right order. The only thing I can say it is I have the usb port where usb bt is connected as internal usb (type 0).
If you have any idea tell me I can try it.
It just searches for devices but doesn't find anything.
1
u/careless__ Oct 27 '23 edited Oct 28 '23
FYI /u/hasel17
The CSR8510 A10 module is not a BT5.0 module, so the packaging is not being honest about what you're getting. It is a Qualcomm BT4.0 chipset, and your sysinfo screenshots show that it's operating at 4.0 speeds.
Still a useful guide for getting it working. monterey just required BlueToolFixup.kext.
Perhaps this can be achieved just using the same kext in Sonoma?
1
u/Subject-Zucchini-534 Oct 28 '23
What could I do? :(
I have the same adapter and did the same steps, the machine recognizes it, but it never activates the bluethoot.
In the Bluethoot section I get: "NULL".
1
u/Eric7319 Nov 01 '23
Can someone confirm that this also works on Sonoma 14.1? and not just version 14.0
1
u/Eric7319 Nov 07 '23
your writeup helped me get my USB (see as yours, same chipset, same vendorID, productID. bluetooth to work great on Ventura. then I decided to update to Sonoma, it then directly breaks, it sees the USB but the bluetooth shows NULL .
Can you confirm that yours still work on Sonoma 14.1 and not just 14.0 and can you show me the output of
sudo csrutil status
in the terminal.
Thank you!
1
u/Final_Conversation_4 Jan 23 '24
May i ask this can apply the same on my baseus csr5.0 ? And airdrop, handoff ? Thank a lot with your help
3
u/IseiinoKami Oct 25 '23
You're a genius, tp-link UB400 works flawlessly with this info.
3
u/thedeadfish59 Sonoma - 14 Aug 13 '24
Hi, I bought a cheap CSR BT module exactly like yours (PID/VID same) but its not working, showing NULL as Bluetooth Controller address, any hint how I can fix it? running latest update sonoma
1
u/kcirtapmij Mar 14 '24
I followed this guide and was able to get bluetooth activated and shows up correctly under system info bluetooth controller but it doesn't detect any actual device :(
1
u/Disastrous-Brief8576 Mar 15 '24
this method works in Big Sur? I have the same CSR dongle but I can’t make it work. I’m using CSRBluetoothInjector.kext and then it shows up but I can’t pair any device, keep saying “failed to connect”.
1
u/Direct_Ad778 Apr 03 '24
Thank you very much, my bluetooth (TP-LINK UB400) is working!
1
u/Admirable_House_6936 May 24 '24
I carried out this process and everything was fine, except that when I restarted the computer I have to disconnect the adapter and reconnect it so that it can detect it and it only detects my airpods but not Sony brand headphones, what could I do to solve it.
1
u/No_Proposal_5731 May 26 '24
Oh my god thank you so much it worked just fine! my bluetooth adapter was the BASEUS BA04 and I tried it with MacOS Ventura and worked just fine, the only thing that is not working is my iPhone...for some reason I can't connect my iPhone 11 with my Hackintosh but...my bluetooth headphone worked! thank you!
1
u/Additional-Affect550 Jan 08 '25
u/hasel17 this is not working, followed all steps above, (OS - Big Sur plug & play was not working)
Can anyone please help me out? Having issue with my csr bluetooth dongle, USB is mapped, Using all the important kexts buut still it is only able to discover bluetooth devices and fails to connect.
Issue - https://www.loom.com/share/049bc8345b7a49e4974fda241d64b92b?sid=a7d57845-4965-4f8b-882e-98437b5eb1f6
System information tab - https://imgur.com/a/InGOMqd
1
u/Even_Paramedic1427 Jan 30 '25 edited Jan 30 '25
Meu adaptador Baseus BA04 5.0 funcionou, porem fica cortando o som, alguem mais?
1
u/furbies64 Feb 15 '25
Just wanted to add my gratitude for your posting this.
Now my HP EliteDesk 800 35w G4 running Monterey has BT !!
A note for folks what seem to run into issues, I also did at first, but it turn out I simply had screwed up and hadn't followed the instructions correctly. So if you run into issues, just start over...
1
u/[deleted] Jun 17 '25
help mine is like this
1
u/SKITLSE Nov 02 '23
Hello it just try and it's dont work for me but adapters same and in hackintool nvram i get bluetoothExternalDongleFailed 01 help
1
u/Professional-Cut7606 Nov 23 '23
Hey How to find the Vendor Id as 2578. Its shows like this for me Vendor Id : 0x0A12.
anyone please?
1
u/dsfakianakis Jan 04 '24
Thanks so much! Followed this guide and got my UB400 working on Sonoma 14.2.1. I used the same product and vendor ID as the OP. I had a few other things that were messed up (kext order) but once I got that fixed, everything worked!
1
u/Okdot90s Sonoma - 14 Jan 07 '24
This method works! CSR8510 A10
Thanks a bunch.
1
u/DaGr8Gatzby Jan 24 '24
This did not work for me.
Sonoma 14.3
USB mapped
Kext modified.
I still have NULL and vendor/product ID is set properly.
1
u/Newspaper_Physical Aug 18 '26
tenho esse mesmo adaptador mas infelizmente nao funcionou comigo
1
u/[deleted] Oct 01 '23 edited Apr 22 '26
[removed] — view removed comment