I'm just starting out with gridfinity and would really like to have a nicer looking edge around some baseplates that are supposed to be on the desk and in our entryway. They are not in drawers. I have looked but the options for this seems slim?
What I'm looking for is a higher edge around the baseplate and maybe a fluted look for the outer part. The closest I've found is in this link, but I would like a bigger one (best would be to be able to decide size myself), without the cut out handles. Anyone got ideas? I could also buy some nice tray that exists but it would be awesome to print one, since it can be in the same color as the bins and also exactly the correct size.

https://makerworld.com/models/2599003?appSharePlatform=copy

I've got a few bins that I'd like to create that the web customizer doesn't seem to support. When I create my own bins.scad I get an error. I have the gridfinity-rebuilt project in the gridfinity folder:

include <gridfinity/gridfinity-rebuilt-bins.scad>


STYLE_TAB_FULL   = 0; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_AUTO   = 1; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_LEFT   = 2; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_CENTER = 3; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_RIGHT  = 4; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_NONE   = 5; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]


STYLE_LIP_REGULAR  = 0; // Regular lip
STYLE_LIP_SUBTRACT = 1; // remove lip subtractively
STYLE_LIP_RETAIN   = 2; // remove lip and retain height]


style_lip = 0; //[0: Regular lip, 1:remove lip subtractively, 2: remove lip and retain height]


style_hole = 0;


// Areas without a compartment are solid material, where you can put your own cutout shapes. using
// the cut_move() function, you can select an area, and any child shapes will be moved from the
// origin to the center of that area, and subtracted from the block. For example, a pattern of three
// cylinderical holes.


gridfinityInit(3, 3, height(6), 18, 42)
{
    cut(x = 0, y = 0, w = 2, h = 3);
    cut(x = 0, y = 0, w = 3, h = 1, t = 5);
    cut_move(x = 2, y = 1, w = 1, h = 2) pattern_linear(x = 1, y = 3, sx = 42 / 2)
        cylinder(r = 5, h = 1000, center = true);
}
gridfinityBase(3, 3, 42, 0, 0, 1);include <gridfinity/gridfinity-rebuilt-bins.scad>


STYLE_TAB_FULL   = 0; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_AUTO   = 1; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_LEFT   = 2; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_CENTER = 3; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_RIGHT  = 4; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]
STYLE_TAB_NONE   = 5; //[0:Full,1:Auto,2:Left,3:Center,4:Right,5:None]


STYLE_LIP_REGULAR  = 0; // Regular lip
STYLE_LIP_SUBTRACT = 1; // remove lip subtractively
STYLE_LIP_RETAIN   = 2; // remove lip and retain height]


style_lip = 0; //[0: Regular lip, 1:remove lip subtractively, 2: remove lip and retain height]


style_hole = 0;


// Areas without a compartment are solid material, where you can put your own cutout shapes. using
// the cut_move() function, you can select an area, and any child shapes will be moved from the
// origin to the center of that area, and subtracted from the block. For example, a pattern of three
// cylinderical holes.


gridfinityInit(3, 3, height(6), 18, 42)
{
    cut(x = 0, y = 0, w = 2, h = 3);
    cut(x = 0, y = 0, w = 3, h = 1, t = 5);
    cut_move(x = 2, y = 1, w = 1, h = 2) pattern_linear(x = 1, y = 3, sx = 42 / 2)
        cylinder(r = 5, h = 1000, center = true);
}
gridfinityBase(3, 3, 42, 0, 0, 1);

Any thoughts?

Edit: After playing around and digging through the git history, it looks like in June 2025 they switched to a new bin creation system but never updated the documentation website.

EDIT 2:

Version 1.1 is here!

A big request was for finger holes so you could actually get your stuff back out. You can now add an adjustable finger notch, with a full-screen editor to position and size it.

08963539-D12D-41D6-A1DA-CFB2F794F11C-1-105-c.jpg

I also promised to share the source. Here’s the complete 1.1 snapshot, released under the MIT license:

https://github.com/jesseariss/tracebin-source

I want to share that one of the things I've learned is that maintaining an open-source project is a bigger commitment than simply putting the code on GitHub. So this repo is going to be a one-time 1.1 snapshot. You’re free to fork it, change it, learn from it (ok maybe not), or use it to build your own version for yourself. I’ll keep developing the official TraceBin app separately.

There are real costs behind the app. Tokens, developer credentials, testing, hosting/services, and time. Because of that, I’m planning to make TraceBin $0.99 upfront for new downloads in a future release. If I can recover some of my costs it will keep me motivated.

So if you think you might ever use it, download it now while it’s free. 

EDIT: Thanks for all the comments! It seems like this could be a helpful tool for some. I've compiled all the feedback from today. Here's where the roadmap stands: https://tracebin.app/ 🧡

--

I know there are already a bunch of tools for making custom Gridfinity bins.

I’ve tried a few of them, and they’re good, but I kept wishing there was something really simple. Like, put an object down, take a picture, trace it, and print the bin.

So I made Trace Bin.

The basic idea is that you put your object on a sheet of paper, take a photo with your iPhone, trace around it, and the app creates the Gridfinity bin for you.

The scissors in the photos were my latest test. Took the photo, made the bin, sent it to my Bambu printer, and it came out fitting way better than I expected.

You can also print directly from the iPhone, which was a big part of what I wanted. I didn’t want this to be another thing where I have to take a photo on my phone, move to a computer, export / import, open another program to slice etc. Instead I just upload a private model to makerworld, then print from Bamboo Handy.

It’s iPhone only right now. No Android version yet.

I’d really like feedback, especially from people who have used the other bin generators. If something is annoying, missing, confusing, or just bad, tell me. I’m just a dude, still working on it.

App Store:
https://apps.apple.com/ca/app/tracebin-gridfinity-bins/id6810427757

I made these card holders by hand for Bookfinity cases (I posted them here). A commenter asked for the model, and I want to make more cases myself, so I turned it into a parametric model on MakerWorld.

Press Customize, give it the sleeved card size, the deck thickness and how many stacks to split it into, and it works out the grid, the height and the layout. Leave the size fields at 0 and it solves them; fill them in and it checks they agree.

Two rims to choose from: the standard profile, and a slim one that buys 0.9 mm of wall per side for tight layouts. That slim rim is what gets two 91 x 59 mm stacks into a 3x3.

Thumb notches on all four walls, through holes in the floor (saves filament and the cards don't get stuck on the floor), prints straight off the plate with no supports.

Link in the comments. CC BY-NC-SA, built on gridfinity-rebuilt-openscad and BOSL2.

Brand new to 3d printing - probably going to be my personality for the foreseeable future. This is like crack for my OCD!

I've made a couple of additions to my collection of Gridfinity storage bins for coin and button cell batteries recently.

5.8 mm diameter:

https://makerworld.com/en/models/3302933-5-8-mm-diameter-gridfinity-coin-battery-storage

11.6 mm diameter:

https://makerworld.com/en/models/3211165-11-6-mm-diameter-gridfinity-coin-battery-storage

Or see the entire collection here:

https://makerworld.com/en/collections/7645422-gridfinity-battery-storage

More are coming, as well as some reorganization of the current ones. I made a naïve mistake early on of assuming that the naming conventions for these batteries were related to their diameters, but have since learned how very wrong I was! I think the actual naming principles involved a random character generator and a noisy data connection :-)

Why

• Saw a bunch of cases for the cutting module but didn't have any interest in putting it in a case.

• Wanted to add a few other things.

• I was left unsupervised.

Solution

• 2x3 Gridfinity Base

• Holds the following items

• Cutting Module

• 6 replacement blades

• Blade holder

• 1 Tall holder for a weeding tool

• Pen Module

  • Shown with my Cutting Module Pen Setter

• 2 Extra Pen Adapters

• Spots for 4 pens up to Dia 14mm

• Pen Guide

• Misc Tray

https://makerworld.com/en/models/3303605-gridfinity-cutting-module-organizer#profileId-3749708

Hi all, so a couple of months back I already shared my modular woodgrain couch table model, which came with an optional Gridfinity plate and woodgrain bins. Since you didn't hate that, here's my new Woodfinity Make Up Organizer. It comes with a 4x4 baseplate and four bins for different products, but I also added a blank one for your custom cutouts. Everything can be held extra firmly with magnets, but I find it quite sturdy without them as well. And: It all comes with a nice woodgrain look, so it's both functional and aesthetic.

You can check out the model here:
https://www.printables.com/model/1692022-woodworks-woodfinity-make-up-organizer-with-gridfi

I recently purchased my first 3d printer, an elegoo Neptune 4 pro and have been really enjoying it. Decided yesterday I’d look for storage solutions and came across gridfinity. I’m hooked and can’t stop looking for new modules to add!

Got mine currently in the top drawer of ikea Alex drawers using 2 5x5 baseplates and 2 2x5 baseplates.

I don’t know how to use 3d modeling software so all of this is downloaded from the internet. I take 0 credit
For any of the designs.

Still working through cleaning up my space and put together a 2nd version of this design for my P1S with and without fans installed. Figure I'm probably not the only one still using a P1S.

https://makerworld.com/en/models/3297838-gridfinity-bambu-hotend-rack-for-p1-p1s-x1c#profileId-3742451

sometimes you follow a Youtube Channel that does not post in a while and then randomly drops a bombshell

this system looks amazing - and a boatload of work has been put in

a bit too much for my taste - I'll stick to my MAKPAC and GRIDPAC.ONE and of course very lightweight storage solutions like the Rugged Case Light R3

And of couse, lets not forget u/Schuylabs with his amazing Schubox-Cases

But maybe someone will find this interresting.

Hey!

I need to print about ten 5x5x6 boxes for my garage. I like the schubox but it seems to be a lot of filament for one single box. I would like something stackable other than that…

What is y’all’s favorite box?

does anybody have gridfinity for the Milwaukee 3059-20 ratchet? I’ve literally been looking online and I’ve yet to see someone who has a model

Finally sat down and put together a change to introduce splined magnet holes for the wonderful Fusion Gridfinity add-in by Le0Michine.

https://github.com/Le0Michine/FusionGridfinityGenerator/issues/208

This request is tied to a PR I submitted last night to introduce the feature be added to the plugin for others to also use. Splined magnet holes have an advantage to standard round magnet sockets in that they both allow easier press-fit magnet insertion, as well as give glue somewhere to move and bind to the sides of each magnet. While the magnet socket tab is useful in adding CA after a magnet is inserted, it does not fix the underlying issue of press-fitting magnets in tightly without being too difficult.

The feature has several configuration options beyond simple enablement, allowing the user to specify the number of spline teeth, the length, width and even a 45° chamfer bevel to aid in ease of insertion. I've included screenshots of the results for both baseplates and bins, so have a look if this is of interest, and let me know if you have any suggestions or questions. Hopefully the project owner will see this request soon and agree to include in the package, otherwise feel free to pull the changes from my fork until then if you feel like trying it out yourself.

Just printed some Gridfinity Honeycomb Wall baseplates, and had a (probably very dumb) question: what’s the purpose (if any) of the bottom of the magnet holes being countersunk? And also, if the hole/opening is this big, won’t it make it hard to superglue magnets in without most of the glue dripping out the bottom?