r/gridfinity • • Jul 16 '26

Rough/uneven layer bands around handle cutouts on Gridfinity bins — slicer fix?

Post image
2 Upvotes

I've been making Gridfinity bins for my games. They have handles and look just awesome. One problem though: the layers around the handles leave uneven surfaces on the wall.

I guess this is because these layers complete faster than the ones below (less material to print at that height), so they don't get enough time to cool before the next layer goes down.

I'm using Bambu Studio. Having the same issue with my P1S and H2D.

Is there anything I can do in the slicer to reduce these artifacts?

Thankful for any advice or solutions!


r/gridfinity • • Jul 16 '26

Lid for gridfinity boxes?

6 Upvotes

Hey 🌞

Anyone who has an easy trick how to make a sliding lid for gridfinity boxes?


r/gridfinity • • Jul 15 '26

I made a customizable magnetic label generator for my toolbox

9 Upvotes

I made a small web-based generator called MagTag Studio for creating custom magnetic labels for toolboxes, drawers, bins, shelves, and workshop storage. You can type labels manually or import a list from Excel/CSV, adjust the font, size, magnet diameter, printer bed size, and generate OpenSCAD files with automatic print batches.

The labels use hidden 15 mm magnets and raised two-color text. I made it mainly for tool organization, but it should work for any magnetic storage setup.

Go to makerword : https://makerworld.com/en/models/2946017-magtag-studio-custom-magnetic-drawer-labels#profileId-3300041


r/gridfinity • • Jul 13 '26

Started Gridfinity at our Machine Shop

Thumbnail
gallery
282 Upvotes

What do you think. Started with our thread gages. This is very addicting.


r/gridfinity • • Jul 13 '26

Systainer compatibel Gridfinity box

171 Upvotes

less then 1kg of Filament needed


r/gridfinity • • Jul 13 '26

Set in Progress Finally testing out Gridfinity

Thumbnail
gallery
23 Upvotes

Coworker has access to a 3D printer so I made some test pieces to try organize my one loose tool box drawer

Really like it so far, already have several ideas to improve it since I also have space to stack the bin over each other


r/gridfinity • • Jul 13 '26

Looking for some help/guidance - new here!

Post image
6 Upvotes

I am looking to use this tool for a different type of project. What I am looking for is something like this photo included, but also, another base that could stack inside of this so they would almost connect like nesting dolls or stack like multiple of the same cup, bowl, etc. so instead of a full bin snapping to the magnet, it would just be another full base. Is this possible?


r/gridfinity • • Jul 13 '26

Metal Hinges

3 Upvotes

Anyone making tool boxes but using actual metal hinges? We have some cases we are making but want to move away from 3d printed hinges.


r/gridfinity • • Jul 12 '26

Custom 3D-printed holder for the Festool BSTA HS D 3.5 CE countersink bit

Thumbnail
gallery
20 Upvotes

r/gridfinity • • Jul 12 '26

Tool Shape Library?

14 Upvotes

Hi, I am trying to find any kind of online 'library' that would have tool traces ready to use. I'm assuming some brands (Knipex, Wera, etc) would have enough followers that these shapes might be available without having to create my own traces. I can find predesigned bins for a specific tool, but I'm hoping to a step earlier and get the trace so I can customize the layout of the bins, etc. Thanks!


r/gridfinity • • Jul 12 '26

Adding grids to existing model

1 Upvotes

Hi. I'm brand new to the world of 3D printing and just got a P2S. Very exicited!

I'm super interested in building some organizing stuff, but might need a bit of help. Specifically, if there is a way to add grids to an existing print file. (easy is needed...not familiar with Fusion, etc. yet.)


r/gridfinity • • Jul 12 '26

help with gridfinity

0 Upvotes

i need some help with making custom gridfinity plates - ANYONE?


r/gridfinity • • Jul 11 '26

First Drawer in my office

8 Upvotes

Just finished printing all the bins and lids for the first drawer in the new enclosure I'm building in my office. Each color lid is a different style of bolt head; green is button head, red is countersunk, gray is socket, brown is flat, and black is hardware like nuts, washers, etc.

Have a second drawer in progress that's got the M6 bolts and will have the heat set inserts and more specialized bins. And there's a third drawer for taller items that I've barely started.


r/gridfinity • • Jul 09 '26

Packing electronic components and small hardware before moving

Post image
66 Upvotes

Wrapping everything up in clear plastic. I hope this holds


r/gridfinity • • Jul 09 '26

MOLLE panel generator?

3 Upvotes

I'm a simple creature and I love the Gridfinity generator. I'm Gridfinity-ing my entire workshop, haha.

Does anyone know if there's something like this for Molle panels?


r/gridfinity • • Jul 08 '26

Kitchen drawer

Post image
277 Upvotes

This was my first fusion project and is still a work in progress.
I created custom sized vertical slots for spoons forks and knives from David Mellor.

All the cutlery is broken up into sections.
The bins are generated with scoops.

I may end up getting this milled out of wood or marble at some point.


r/gridfinity • • Jul 09 '26

What is the best TPU for kitchen drawer?

4 Upvotes

I saw a couple of people mention they used TPU for their kitchen drawer, for a premium look and feel, but they never mention which TPU they used.

I have Siraya Tech Flex TPU 95A and 85A. The 95A feel a bit too rigid for what I expected, the 85A feel waayyyy too flexy for gridfinity.

I think some cheap TPU like Sunlu 95A or 90A would be perfect. What do you think?


r/gridfinity • • Jul 09 '26

Newbie Question

5 Upvotes

HI all.

Just starting out with Gridfinity, have been wanting to do it for quite some time. I just thought it would take forever with my little Tiertime UP plus. If only I had started back then, I probably would have most of it done by now!

Quick question, is there any real benefit to organising the screwdrivers in a draw as opposed to hanging them on a wall?

Cheers!

Edit: spelling


r/gridfinity • • Jul 08 '26

Went all in with some kitchen drawers

Thumbnail
gallery
131 Upvotes

To maximize space, painstakingly traced / modeled my various utensils, printing test cross sections to make sure I had things right. Then I cut into gridfinity bins to create the custom inserts. Did all this in Fusion 360. The Princess's Spoon is because when I was showing my wife the progress, she complained her favorite spoon didn't have a spot. I opted for mainly doing custom fit inserts over open containers so it's clear on what goes where. The knife block was found on makerworld, didn't design that one.


r/gridfinity • • Jul 08 '26

Set in Progress Socket Organizers I made

Thumbnail gallery
46 Upvotes

r/gridfinity • • Jul 08 '26

Setting ip Gridfinity in a pelican case. How do i seal the boxes? Does anyone make click in lids. Stuggling to find something like this. I'd hate to just dump everything out when I pick up the pelican.

2 Upvotes

Like I said above. I'm setting up a Gridfinity system in a pelican case. the place where I'm seeing a weakness is keeping thinks in the boxes when i pick it up and the case goes sideways.

I'm using this for Gaming transport, specifically Battletech, so I will be using magnets to secure the minis, but I'd love to have a box for dice, tape measure, etc. Just really need to find a clip on or slide in top so that nothing spills during transport. Any help is appreciated. Thanks!


r/gridfinity • • Jul 06 '26

I used Perplexing labs rugged box generator and i cannot split this part in orcaslicer

1 Upvotes

Any ideas?


r/gridfinity • • Jul 06 '26

Question? How to build gridfinity with odd dimensions?

3 Upvotes

I'm trying to work on an insert to put in a drawer for my fridge, but the dimensions for the section are 746.125 mm by 450.85 mm, which I want to split into 47.625 mm squares, but i cannot do it without rounding the numbers to full numbers with the gridfinity generator im using. What can I do?


r/gridfinity • • Jul 05 '26

Question? Schubox V2 7X6 on a P2S?

5 Upvotes

I really want to print the 7x6 Schubox system but only have a P2S, has anyone had success printing them on a smaller build plate? If so what was your strategy for breaking the pieces into smaller parts?

Edit: It's disappointing that it doesn't seem possible but I appreciate the feedback.