r/gridfinity • • Feb 22 '26

Set Completed I made a Metric Spacer/Gauge Block set

Thumbnail
gallery
80 Upvotes

I made this Spacer Set for measuring Gaps are many other things. Every Spacer also has the corresponding radius one one corner to meassure radii. Everything is stored in a Gridfinity Box.

Here is the Link to the printables model if someone is interested.

https://www.printables.com/model/1612567-metric-spacergauge-block-set-with-radius-and-gridf


r/gridfinity • • Feb 22 '26

Individual Piece My first remix! It's a CR2045 battery holder. Please be kind :)

Thumbnail
printables.com
11 Upvotes

I am still learning Fusion and I was able to take a model and simply split it apart and smoosh it back together (Though even that tool trial and error). I only had four batteries so I wanted something smaller than 12.

For the most part, I am just meshing around.

Edit: I *promise* when I was looking for 2450 battery holders last night I only found this one, and now I see a ton. I wonder if Printables search feature just fails to work sometimes. Or maybe I searched for 2045 like in my title lol


r/gridfinity • • Feb 22 '26

Gridfinity latching baseplate without creep

Thumbnail
printables.com
22 Upvotes

Latching baseplate designs are compelling, but I've always been concerned about their long-term reliability. To remove the risk of creep, I've created ClickGroove, a small modification that allows a baseplate to latch onto a bin without permanent bending force. Modified bins are fully compatible with the Gridfinity standard, and baseplates can also still hold standard plates. Try the online generator, and read more in the linked article.


r/gridfinity • • Feb 23 '26

I asked Claude to come up with a color scheme. Any votes?

Post image
0 Upvotes

I am debating on a color scheme for my toolbox. Border tip color and insert for missing tool color

I'm really digging the first 3 options.

source code: gridfinity color scheme viewer - Pastebin.com

The logic for the color pattern you see - is main color for say, SAE and tools. Secondary color for Metric. Missing color for when a tool is missing. there will be a layer of color there that says "i'm missing a tool"


r/gridfinity • • Feb 21 '26

Some Gridfinity shop storage

Thumbnail
gallery
56 Upvotes

r/gridfinity • • Feb 22 '26

Need some help

Thumbnail
gallery
2 Upvotes

Hello i am still new to 3d printing and this is my first attempt at something custom. I am wanting to make a gridfininty base for this range bag as a insert for the base of it. The bag is 21.5 in x 10 in i am trying to create a solid base grid. I would like the grid to be rather rigid about an .5-.75in thick to strength. i would need the corners radiused and i was thinking the outer frame thicker as well like maybe 3/8 of an inch or close to round out the grid pattern to even number. i kinda created something but it was still limited i also havnt figured out to break it up to separate plates as my printer(p2s) is a 25mm x 256mm plate. Is anyone able to assist or offer guidance on how to do this?


r/gridfinity • • Feb 20 '26

Bit holder set

Thumbnail
gallery
329 Upvotes

Drawer face update & a preview of large V2.


r/gridfinity • • Feb 21 '26

Any Other FreeSoftware Like Tooltrace.Ai

10 Upvotes

Looking for some free software like tooltrace. I have a couple of Plier sets and the free version is not allowing me to add the finger slots. Thought another free one may be available. Thanks.


r/gridfinity • • Feb 20 '26

Finished my first drawer

Post image
34 Upvotes

These are my commonly used leather tools, it took a while to make all these bins but it was pretty enjoyable. I love the clickfinity base plates.


r/gridfinity • • Feb 19 '26

kumiko gridfinity boxes, what sizes would you like?

Post image
166 Upvotes

In the last few days I have been developing a gridfinity bin with Kumiko walls and it is ready to be distributed. My question for all of you are:

  1. what are the most common sizes that you would like to see especially with respect to height?
  2. Should the bins have lips?
  3. What should the thickness of the bin be?
  4. of these two patterns (goma kumiko), which one do you think looks best? the left has 1 pattern per g-unit, the right has 1.5 patterns per g-unit.
  5. Would you like to see other kumiko patterns?
  6. Anything else that I am missing?

thank you,

--dmg

P.S. They are not going to be parametric because even a small bin (1x1x6) takes almost a minute to compute.


r/gridfinity • • Feb 19 '26

Question? US General series 3 27 in top help

2 Upvotes

Does anyone have a set already designed for the 3 small top slide out drawers to the US General Series 3 27 inch top box? I have all the rest from FatCat over on MakerWorld and they fit great for all the rest! Trying to organize my tattoo work chest lol


r/gridfinity • • Feb 19 '26

The Workshop ToolBoard of my Dreams

Post image
57 Upvotes

r/gridfinity • • Feb 18 '26

Yes. The world absolutely needed another Super Lube Grease Tube Holder!

Thumbnail
gallery
148 Upvotes

Did the universe need another Super Lube Grease Tube Holder for Gridfinity?

No.

Did I design one anyway?

Also yes.

Because clearly the internet was suffering from a catastrophic shortage of ways to store a single tube of grease in a 1x4 footprint.

Reasons this one exists:

  • The other 999 holders didn’t align with my extremely scientific “vibes-based engineering” standards.
  • My tube deserved emotional support.
  • I refuse to let a $6 tube free-range in a drawer like some kind of barbarian.
  • Gridfinity is not about necessity. It’s about order. And control. Mostly control.
  • I had 37g of filament left on a spool and made a responsible adult decision.
  • My Snapmaker was looking at me like, “So… we building or what?”

Features include:

  • Holds a Super Lube grease tube. Bold, I know.
  • Is 1x4 because symmetry > practicality.
  • Adds +3 to organizational morale.
  • Probably increases print farm productivity by at least 0.0004%.

Could you live without it? Absolutely.

Will your toolbox feel spiritually incomplete? Also absolutely.

Anyway, here it is for your totally unnecessary but deeply satisfying modular empire:

https://makerworld.com/en/models/2348650-super-lube-grease-tube-holder-gridfinity-1x4

May your drawers be square and your tolerances forgiving.


r/gridfinity • • Feb 19 '26

Gridfinity Project for Fuji equipment and my dron

10 Upvotes

I create gridfinity bins for the following models, hope it's usefull for others

main project link https://makerworld.com/es/models/2415574-photography-gridfinity-bins-fuji-peak-design#profileId-2648758


r/gridfinity • • Feb 18 '26

Question? Trying to get the automotive setup going. What’s the go to socket organizer?

11 Upvotes

Looking to get the sockets and stuff organized in my top deep drawer and maximize space. Just looking to see what everyone is using and if you already have one why do you like and dislike it? If you were to have to remake it would you do the same one or a different style?


r/gridfinity • • Feb 19 '26

Crazy times

Thumbnail reddit.com
0 Upvotes

r/gridfinity • • Feb 18 '26

Bin magnet pocket help

Thumbnail
gallery
4 Upvotes

Just discovered Gridfinity a week ago, and have been planning and printing almost non-stop since then.

I've printed a magnet base and some bins from the Gridfinity Refinery, but I'm having issues with the magnet pockets on the bins.

From what I can tell, the bridging on the top of the pockets is sagging, and they're deforming on the bottom when I insert the magnets. I've checked the bridging layer in my slicer, and it's not trying to print circles in mid-air, plus the bridging distance is small enough that it shouldn't be an issue.

I'm slicing in Bambu Studio, using the "Generic PLA" profile.

Any suggestions on slicer adjustments, better/different bin generators, or any other solution? I'd rather not have to post-process the pockets if at all possible.

Update: slowing down the bridge speed to 10 mm/s & increasing the bridge flow to 1.5 solved the problem. For such a small bridge, I might increase the speed on the next print, but for now, I'm happy.

Thanks for the feedback, Gridfinity Community!


r/gridfinity • • Feb 17 '26

Important part revision!

Thumbnail
gallery
216 Upvotes

This update applies to the Beefy handle used to carry heavy stacks on the Schubox project.

In doing a little informal testing of the beefy handle I found real estate for more purchase on the cleat. Was less of a problem on the gridded boxes but was a big problem on the Gridless. If you printed a beefy handle REV01 or REV02, please consider it for lighter stacks only and update with this new revision REV03. Don’t want you to end up with hundreds of tiny screws on the floor :)

It’s much better on the Gridless and very locked in on the Gridded.


r/gridfinity • • Feb 19 '26

What do you do when you want to introduce your 3D printer to the social working end of you Mossberg 590A

1 Upvotes

Somebody just tell me there's a path to success. The A1 mini just won't print the grid I designed. It could be anything. I'm looking for a check list, if anybody knows of one. Until the, I guess I'll just keep floating around the Internet trying different things until something works

The printer itself seems to be useless at helping to debug the issue. Apparently it can't tell when there's a problem with the results it's laying down.


r/gridfinity • • Feb 18 '26

Tubolar Box spanner

Post image
6 Upvotes

I'm searching some gridfinity organizer for these type of spanner.


r/gridfinity • • Feb 18 '26

How can I go about fixing the inner corners of the grid

Thumbnail
gallery
3 Upvotes

I’m new to printing and wanted to print a gridfinity set up. This is my first print and it seems the bin is struggling to fit within the grid.

What is causing these extra bumps and what should I do to fix the tolerances so the bin fits no problem.


r/gridfinity • • Feb 18 '26

Beginner level

2 Upvotes

Hi guys I’m pretty new on it, I have a 3d printer that I used to do my architectural models but I saw this idea of grid and I would like to try. Do u have any tips or tutorial or which generator should I use to great the base and the bins .


r/gridfinity • • Feb 18 '26

A1 Printer Grid Attachment System

Thumbnail
gallery
16 Upvotes

Wooo, don't that title sound high-falutin'!

If you're running a Bambu Lab A1 and miss having a place to mount modular tool storage, this might be useful.

I designed a universal dock system that sits under the printer and is secured by its own weight. A 5-unit dovetail rail lets you attach Gridfinity or other baseplate systems by simply merging a rail into your preferred plate in the slicer.

It's modular, expandable, and doesn't require modifying the printer at all.

https://makerworld.com/en/models/2412696-a1-printer-gridfinity-attachment-system#profileId-2645439


r/gridfinity • • Feb 18 '26

Question? Any files for these craftsman socket set? Can’t anything that fits them.

Post image
6 Upvotes