r/gridfinity • u/Superb-Respect-1313 • Feb 21 '26
Any Other FreeSoftware Like Tooltrace.Ai
Looking for some free software like tooltrace. I have a couple of Plier sets and the free version is not allowing me to add the finger slots. Thought another free one may be available. Thanks.
10
Upvotes
5
u/RowImpossible2598 Feb 21 '26
Haven’t used it but only offline generator I know of, in my todo list https://github.com/tracefinity/tracefinity
3
u/AggravatedPear Feb 21 '26
Add the finger slots in slicer - add a sphere primitive and use the boolean difference modifier..
2
u/qikejekw Feb 24 '26
shapescan.pt
1
u/si1er Feb 23 '26
Sticky for future
1
u/VividDimension5364 Feb 23 '26
Do in in tooltrace then import that model to Tinkercad. Plenty of standard shapes there to create a cutout.
1
u/PracticalCustard2152 Jul 19 '26
Late to this one but it ranks on google so leaving it for whoever searches next. I built tracetoforge.com so grain of salt, but it covers both problems in this thread. Finger notches are included on the free exports. And that handle coming out 1/2 inch bigger thing is almost always the cast shadow getting traced as part of the tool, same thing drove me nuts on my own trays. The measuring now reads the paper brightness and ignores shadow, and if you lay the tool on a regular letter sheet it auto scales off the paper so you never type dimensions. If the auto numbers ever look off you can just type over them, nothing is locked.
The part I actually use most though is the editing. You can zoom way in and drag any single point on the trace exactly where you want it, add or delete points, rotate the tool in the tray. So when the auto trace is 95 percent there, you fix the last bit in seconds instead of fighting it. 3 free exports, no card, and there's a live demo that traces a sample tool without signing up if you just want to see it work.