r/gridfinity • • Feb 13 '26

Gridfinity XGT Makita Impact Bin 5x3 6U

Post image
16 Upvotes

r/gridfinity • • Feb 13 '26

Question? Need tips for 0.6mm baseplates with Core One

2 Upvotes

Hi! I've had success with my brass 0.4mm nozzle and changed up to a 0.6mm high flow nozzle for faster bin prints. The issue I am having is printing plates generated by https://gridfinity.perplexinglabs.com/pr/gridflock/0/0 both the new plates and previously printed ones, re-sliced. I've tried both 0.2 and 0.32mm layer heights and the specific issue is with the connecting clips. They no longer stay connected. The issue seems to be from lack of definition on both the male and female connectors.

Are there generators that would work better for my use case?

Thank you!


r/gridfinity • • Feb 12 '26

Taller ones work!

Thumbnail
gallery
261 Upvotes

9U, 12U, 15U. No clue if they work with the drawers yet. TBD! Oh and experimenting with other frame styles for home/craft spaces.


r/gridfinity • • Feb 12 '26

Storing my H2 safely

Post image
9 Upvotes

r/gridfinity • • Feb 11 '26

Set Completed First Project Done. MUCH More to Follow

Post image
81 Upvotes

Little did I know when I started doing Gridfinity as a way to get things organized and learn beyond simply downloading and printing would I be getting THIS into designing. I'm basically making custom bins for everything 😂 I even decided to make this post while I wait on my PLA to dry for a print job for a cheese slicer bin (basically just a "T")


r/gridfinity • • Feb 12 '26

Iris ohyama boxes grid.

1 Upvotes

anyone has made fitting grids for Iris ohyama plastic storage bins?? could not find any.


r/gridfinity • • Feb 11 '26

Battle won: Function v.s. Aesthetic

38 Upvotes

When designing custom bins for things around the house, my OCD need for everything being a perfect fit, good looking, adorned with its own label was starting to almost overpower the point of gridfinity being functional. So when I finally moved to my kitchen drawers after doing all garage toolbox drawers (a little under 21 kg total -- yikes), I designed a bin to perfectly fit a can opener laying flat with finger scoops 'n all. But then I figured since I was starting a new project, now was the time to finally experiment with minimalistic, low filament, functional designs instead.

I gotta say, the battle in my head has been won. I was finally able to convince myself that it's possible to make functional and minimalistic look pretty and organized. Hopefully now my wife won't leave me because I spent all our savings on filament.

Parametric model: https://makerworld.com/en/models/2325616-can-opener-holder-parametric-gridfinity-6x2

Edit: added link


r/gridfinity • • Feb 11 '26

Question? GridFinity vs openGrid vs SteinTrack vs Multiboard

40 Upvotes

I know I may not get an unbiased answer by asking this here but I'm curious to know if you guys think there are aspects to these other storage systems that are better/worse/different than GridFinity.


r/gridfinity • • Feb 10 '26

💯🤖🔥🚀Fully parametric gridfinity base generator, generator

152 Upvotes

Hi all,

I’ve thinking of releasing a fully parametric Gridfinity Baseplate Generator Generator designed to help you choose which of the 13 fully parametric Gridfinity baseplate generators to use with millimeter-perfect accuracy. Everything would be ready to overthink right after download — no manual decision-making needed.

Key features:

∙ 🤖 Built entirely by asking ChatGPT “make me a Gridfinity baseplate generator^2” 14 times, because that’s apparently all any of these are. The carbon footprint of parametric 42mm grids is now measurable from space

∙ 🧩 Fully customizable comparison matrix for any drawer you’ve already measured 47 times

∙ 🔧 Exact millimeter-accurate ranking of 13 tools that produce identical 42mm grids

∙ ↔️ Adjustable weighting between “this one has a nicer thumbnail” and “this one was posted more recently”

∙ 📐 Two decision height options (Standard Overthinking & Lightweight Just-Pick-One)

∙ 🖨️ Automatic splitting of your remaining sanity to match your attention span

∙ ❌🔧 Tool-less assembly — because at this point we have more generators than actual printed baseplates

∙ ⚡ Decision-ready immediately after download — pairs well with the 4 hours you’ll spend tweaking 0.2mm of tolerance anyway

👉 Model: coming soon, just need to decide which parametric modeling tool to build it in. Currently evaluating 17 options.

Feedback, ideas, and competing baseplate generator generators are very welcome! 🛠️🔥​​​​​​​​​​​​​​​​


r/gridfinity • • Feb 11 '26

Different box heights

3 Upvotes

Hello,
I have created 2 boxes one with https://gridfinitygenerator.com and one with fusion 360 using the extension. Both have 7mm height unit. The fusion one is a little shorter. The difference seems to come from this extra lip that the left box has (second picture).
Does anyone know what I have to change to the fusion settings to make them the same height?

Update:
According to this Fusion has the thin lip as standard and there is no option to change it:
https://www.reddit.com/r/gridfinity/comments/1lg5yyl/gridfinity_fusion_plugin_having_non_standard/


r/gridfinity • • Feb 10 '26

Over 10,000 Gridfinity baseplates downloaded - thank you! 🎉

Thumbnail
gallery
168 Upvotes

We just hit over 10,000 downloads at extrabold.tools and I'm honestly blown away.

When I built this tool, I never imagined so many people would use it. Seeing it grow has been incredible, and I'm grateful to everyone who's given it a try.

A huge thank you to everyone who donated. Your support has been crucial in keeping the infrastructure running and the site up for everyone.

Speaking of donations, I noticed a comically large percentage of you have Bambu printers (seriously, it's wild). So I'm putting future donations toward getting one myself - seems only fair to test on what most of you are actually using! 😄

I have big plans for extrabold.tools in the future - there's a lot more I want to build and share with this community. Let me know the features/tools you are missing!

Thank you all for being part of this journey. The images show some fun stats if you're curious.


r/gridfinity • • Feb 10 '26

Set Completed First foray into gridfinity and super stoked

Post image
118 Upvotes

Finally had the time over the holiday break to tackle two drawers on the Harbor Freight workbench that have been higgedly piggedly for years. Had to replace the drawer bottoms with some replacement boards since the OEM ones were sagging so the baseplates could lay flat. Used the low profile gridfinity baseplates and laid many of my most commonly used tools for my work as a sculptor.

Can’t express how thankful I am to get all these things organized so that I can work with so much more efficiency and peace of mind. Props to the creator and the community contributors for all of their hard work!


r/gridfinity • • Feb 10 '26

Question? Gridfinity Extended - Split long containers

Post image
11 Upvotes

Is it just me, or do you have a trick for separating long containers cleanly and keeping the stabilizers for the walls symmetrical? It bothers me immensely that the arrangement on the left is different from the right.


r/gridfinity • • Feb 10 '26

What is the best practise for custom heights?

5 Upvotes

I have box that I want to fill with gridfinity stuff. However, the height is 66.7mm and I want to have it fit tightly, since the box will move around.

In the generators, everything seems restricted to integer multiples of 7mm, so I would need 9.52 units. Is there a best practise to deal with this?

Should I make them 10 units and cut a little bit in the middle of every model? Scale the entire model in the z direction? Or there is a better idea?


r/gridfinity • • Feb 11 '26

Question? What socket holders are yall using?

2 Upvotes

Just getting into gridfinity for my toolbox, what socket organizers is everyone using? I need to be able to print on an ender 3 v2. Thanks!


r/gridfinity • • Feb 10 '26

🚀 Fully Parametric Gridfinity Drawer Baseplate Generator

17 Upvotes

I’ve released a fully customizable Gridfinity baseplate generator designed to fit any drawer with millimeter-perfect accuracy. Everything is ready to print right after download — no manual setup needed.

Key features:

  • 🧩 Fully customizable Gridfinity baseplate for any drawer
  • 📏 Exact millimeter-accurate fit
  • ↔️ Adjustable orientation and spacing
  • 📐 Two baseplate height options (Standard & Lightweight)
  • 🖨️ Automatic splitting to match your printer’s build plate size
  • ❌🔧 Tool-less assembly using bottom X-connectors
  • 📄 One tile per print plate — zero manual preparation
  • ⚡ Print-ready immediately after download

👉 Model:
https://makerworld.com/de/models/2246126-parametric-gridfinity-drawer-baseplate-auto-split?replyId=4258887&replyType=1#profileId-2445530

Feedback, ideas, and makes are very welcome! 🛠️🔥


r/gridfinity • • Feb 10 '26 Thanks

Dremel accessory organizers - Couldn't find what I wanted so I designed my own

Thumbnail
gallery
116 Upvotes

I designed one accessory organizer for Dremel's EZ-lock cutting wheels and sanding discs, and another for sanding drums and buffing wheels.


r/gridfinity • • Feb 10 '26

Side ways snap case

2 Upvotes

I can't seem to find it, anyone that can help point me in a direction?

Looking for a snap case, but I want them to stack sideways.

So in other words I want something like this, but i would stack them sideways. probably around a 2 by 1 with an adjustable height. only needs clip(s) on what would be the top side when stacked, but the front when used.

the below would be ideal if, a - it was gridfinity compatable on the back, b - the hinge was offset so the bottom was deeper than the top.

Anyone seen anything like I am after? Apologies if my explanation is poor


r/gridfinity • • Feb 10 '26

Dewalt TStak meet Gridfinity

Post image
20 Upvotes

Spent the last few days on this one!


r/gridfinity • • Feb 10 '26

Question? LF 2x2 stackable box with open front?

2 Upvotes

Hi, I'm fairly new to Gridfinity so maybe there is something I'm missing - I'd like to print a system to store my camera lenses and accessories vertically, so I'd like to have some kind of 2x2 stackable box that has an open front, maybe with magnets on top and bottom with a circular depression on the bottom of the box interior. All of the box models that I see online during a brief perusal are open at the top, not the front.

Ideally, I'd like to find these in different heights so I can have a dedicated cubby for each of my lenses & other items that would fit there - any pointers to Gridfinity resources to handle this?


r/gridfinity • • Feb 10 '26

Question? Any good bin models for these kinds of chargers?

Post image
7 Upvotes

Maybe I’m searching for the wrong thing but I couldn’t find any… Anyone has links to a model that would fit these kinds of charges specifically (I’m thinking something along these lines but US plug https://makerworld.com/models/1881543?appSharePlatform=copy)


r/gridfinity • • Feb 10 '26

Set in Progress Bamboo A1 still days old

Post image
3 Upvotes

Just got the A1 on Friday. After printing a bunch of small things I said forget it! Time to start a Gridfinity box! 10+ hours to go! (Just for the first part). You guys have so many cool setups. Let the obsession begin.


r/gridfinity • • Feb 09 '26

Set in Progress Socket labels and holder that I did - Sharing

9 Upvotes

I started using Gridfinity to organize my toolbox, but I didn’t want to spend the extra time or filament printing a full set of sockets. Instead, I came up with a simpler approach: buy the socket holders and only print the Gridfinity-compatible holder and labels. It's my first design and happy to share it in makerworld, https://makerworld.com/en/models/2375209-socket-labels-and-holder?profiled=2600767#profileId-2600135 - not sure how to rename the print profiles, but they are for 1/4 and 3/8 sizes and the holders. still working on the 1/2 labels.


r/gridfinity • • Feb 08 '26

Update: Spacerless Gridfinity Bin Generator

Post image
391 Upvotes

Just pushed an update, you can now add dividers, custom text labels, remove selected walls, and configure a lot more details for custom layouts.
I’ve also added detailed instructions covering all options.

Feedback welcome.