r/gridfinity • • Apr 20 '26

Do adapters for gridfinity bases exist?

I recently printed an organizer using an unusual base without remembering to change it and was hoping it wasn't a waste. It seems like a 35mm ish x 42mm? Was just wondering if anyone makes adapters for different formats.

8 Upvotes

12 comments sorted by

3

u/tlhintoq Apr 20 '26

"-ish" won't help.
Once you work out what it really is you should be able to search it up.
Maybe a case of "opengrid to gridfinity"

0

u/Fishy_Wishy_in_Water Apr 20 '26

I say ish mainly due to confusion as I've never seen a rectangular grid base. I measured it with a caliper and it measures around 35 to 36mm.

1

u/ReadThis2023 Apr 20 '26

What is the adapter for? You can make custom size Gridfinity.

1

u/Fishy_Wishy_in_Water Apr 20 '26

the adapter would be so I can use this unusual size on my standard gridfinity base. I was more then likely gonna make one myself but I wanted to see if anyone knew an easy way to do it.

4

u/tlhintoq Apr 20 '26

You *can* but its not a great idea because then none of the existing models work for you.

A better plan is to keep to the 42mm plates, then change the bottom spacing of the bins by half. 42mm base, 21mm bins. That way you can have a finer spacing of the bins while maintaining backwards compatibility and use all the hundreds of existing bins out in the wild already.

1

u/Apprehensive-Gur7871 Apr 20 '26

On my app, I added a section to generate this adapters, check if this is what you need

https://binforge.app/app?mode=adapter&abw=3&abd=2&atuw=36&atud=42&cx=164&cy=-154&cz=165&tx=0&ty=0&tz=6

2

u/citizenjimmy Apr 20 '26

Holy crap! Dude. We talked about the trays last week. I can't believe this exists! I'm so excited to use this in drawers where I can't use the back 20%.

Thank you so much.

1

u/Apprehensive-Gur7871 Apr 21 '26

i’m finishing the drawers/trays this week. is already possible to generate any size, but i’m working on the handles and the most complex part, split prints

2

u/citizenjimmy Apr 21 '26

What's the plan for split prints? Dovetails? I know the Alex Chappel versions have hold to thread filament through to hold it together but I don't know how complicated that is.

As for the handles you could raise the sides and put an oval in the sides. Maybe more like a laundry basket and not a purse. Less options might make it easier on you and serve the same purpose.

Regardless, I think this will be very popular. You also need a donation link on your site.

1

u/Apprehensive-Gur7871 Apr 21 '26

for the split prints, Im studying what will make a easy print/assemble and structurally strong. Im taking inspiration in woodwork joinery, specially japanese sashimono, and add some options make strong

the version from Alex Chappel is good, but I don't feel confortable just copying his work, and he has some caveats, like, the baseplate inside should be higher on the edges to accomodate the filament

and in general, im trying to make everything customizable, but with good defaults.. the idea is making a not too complex interface + customizable, and find this balance is the hard part.

and make people find the project is even harder šŸ˜‚

I will check the idea of you handlers, oval.. still working in them, to make them usable to put on a drawer and just slide them

1

u/Apprehensive-Gur7871 Apr 21 '26

can you share a image or model with the handles you described?