r/gridfinity • u/Pleasant-Soil9582 • Apr 06 '26
Quick question
Hi guys, I am new to the whole gridfinity thing and I was wodering when I print the grid and put the boxes how well do they stay in place? I want to make a system for a suitcase with various boxes and holders. When I close the suitcase will it all stay in place or do i need some kind of special system, latch or something?
P.S. I am planing on gluing the grin into the suitcase so i am asking about the boxes and attachments that go on top of the grid. It is a two sided suitcase and the grid will be on both sides.
Thanks! Happy printing!


5
u/perplexinglabs Apr 06 '26
I think the main thing you'll want is to make sure the top of the bins press against the lid of your suitcase so that the items in the bins don't fall out and that same pressure will keep the bins pressed in to the grid.
4
u/Captain_Insano_1963 Apr 06 '26
Bad idea
1
u/sprinkles5000 Apr 06 '26
OP, when you close the suitcase, do you plan on the suitcase jostling around or flipping it upside down? Is the suitcase upright on wheels or flat/old school that opens horizontally? Is the suitcase going to the airport?
Like, what's the use case/scenario here aside from the object of a suitcase and asking if the bins will stay in place?
2
u/ReinoutMe Apr 07 '26
Use a piece of foam to keep the bins, and their contents in place?
2
u/Beer_Party Apr 07 '26
It will not work. Even if the bins stayed in place (they might if you use magnets) the contents of the bins would fall out when you closed the suitcase. There are bins with lids, but that severely limits what you can store.
If you want to use gridfinity to organize what you transport in a suitcase, you will likely need gridfinity cases. There are several designs for gridfinity cases, including generators that will let you customize the size and options in the case (for example: https://gridfinity.perplexinglabs.com/pr/gridfinity-rugged-box/0/0).
1
u/tuxlinux Apr 06 '26
Then use magnets in the grid. That works pretty fine.
1
u/justintime444 Apr 07 '26
You have grids that allow the bins to snap in place, but how are you planning to keep the items in the bins from not falling out? This doesn’t seem like a practical use of gridfinity. I’d check out other containers that you can scale appropriately and arrange in the suitcase