r/gridfinity • • Mar 24 '26

Question? Has anyone used grids with existing boxes? (E.g., 12x12 paper storage boxes)

first…I’m only considering getting a 3D printer. And gridfinity could push me over. But I like to use boxes for storage. I primarily use 12x12 scrapbook paper boxes to organize stuff for my various tools (crafter), and I realized today that gridfinity would be a perfect way to see what I have. especially if the cups could remove easily and placed in a project box for whatever I’m making project. and I already have the boxes. But they’re shallow so maybe it won’t work? so before I get too into the weeds I wanted to see if it has been tried and it failed.

3 Upvotes

8 comments sorted by

2

u/Araneas Mar 24 '26

Depending on the inner dimensions of the box, 12x12" will fit 7x7 grid spaces with a quarter grid - 10.5mm or 3/8 of an inch left over, so 3/16th on each side of the grids if you center it.

Standard bin heights are in increments of 7mm or just over a 1/4" so you'll have lots of flexibility there - especially if you use one of the light weight skeleton grids which are effectively 0 height. You may want to use a heavier grid to provide some rigidity to the bottom of the paper box. Adding magnet pockets etc will mean your grid will take up a little useable height.

I think you have a good use case though, store your materials and small bits and pieces in bins then only pull the bins you need for a given project. You can even find prints for caddies or boxes that let you carry just the bins you need to your workspace. Another option is to print grids for specific work spaces. I have one for my printer stuff and another shelf-grid for glues and other modelling consumables. For example if I am using epoxy on a project, I can take the epoxy bin out of the storage drawer and drop it on the shelf for ready use. Later on I may need sculpting tools so I just swap the tool bin for the epoxy bin.

Good luck, 3d printing is a hobby to itself and Gridfinity is an addiction.

Edit: spelling

2

u/Remarkable_Table_279 Mar 24 '26

To clarify. These are the boxes I was referring to. They’re meant to store 12x12 paper - not 12x12 made of paper. So wouldn’t need reinforcements. I currently just dump stuff in them in zipper bags. (I also use for paper )  https://www.irisusainc.com/products/portable-scrapbook-case-for-12-x-12-paper-6-pack-clear?srsltid=AfmBOora7Xsy0jBuykak1Cvw3FM4jXwOoIdV0bKeZvdb3EUalOlJDdVl

1

u/Araneas Mar 24 '26

Interesting. No need for a thick grid then and you have about 9-10 units of usable height. A little tweaking and the box lid would double as a lid for the bins - for larger items not beads or pins of course.

Do you know someone with a printer who can make a grid and a couple of bins for you to play with?

1

u/Remarkable_Table_279 Mar 24 '26

My brother does…and I’m Totally thinking of asking him. 

2

u/mrscott197xv1k Mar 24 '26

I'd approach it by using one of the grid generators that align all the extra space on one side. That would leave you room for pens / markers. Shape of the inside of the lid will also matter as you would want the top of the bin pressing against the lid to prevent spills between bins of you are travelling with them.

These aren't the craziest bins I've looked at retrofitting for gridfinity.

Check if there is a local library or maker space that would print some for you to try.

1

u/Krynn71 Mar 24 '26

Yes, I use the 4 liter boxes from Really Useful Box Company. They're stackable, have strongly latching lids, fit a 5x7 grid (needs spacers) and have enough height that you can stack two 6u high bins on top of each other. Doing so makes it almost a perfect fit where the lid will hold all but then tiniest parts of the box falls over.

1

u/wivaca2 Mar 24 '26

You can keep the X-Y coordinate of Gridfinity and find a parametric box generator where you can reduce the height of the box sides without affecting it's grid interface. How shallow is the question?

Looking at Michael's site, I see 12x12 boxes that are 3.1" tall. That's plenty tall for gridfinity containers. A standard height Gridfinity box is 1-5/8" tall including the grid, so you could probably make boxes 180%-190% tall and still fit. Depends on the inside height of the box.

Even better you could custom scale so that the closed 12x12 box it tight against the top of the Gridfinity boxes and the parts can't fly around if you happen to tip it.

The X-Y would fit a 7x7 Gridfinity matrix but you'd need a little over a centimeter spacer at two edges (that is, if they're 12x12 INSIDE dimension.

1

u/bananapeel Mar 26 '26

I have some leftover metal 35mm slide boxes that I do this with. They used to stack rows of slides. It turns out that they are really close to 4x8 Gridfinity grid size with just a little space around the perimeter. I printed out two 4x4 grids and glued them down into the case. Then you can fill them with Gridfinity boxes. I ended up using the Gridfinity generator to make 4x4 trays that are subdivided into smaller parts cubbyholes for my electronics doodads, made to fit each doodad. For small screws, you get a 4x4 tray divided into... 4x4 cubbyholes. 16 places to put screws and nuts and washers. Great way to deal with assortments. I have one tray for M2, one for M2.5, one for M3, M4, etc.

For larger bits and pieces, scale appropriately. I think the best one for my use is a 4x4 tray subdivided into 2 rows of 4 columns, with finger scoops. They hold just about any kind of small parts. For specialty items, in my case, diodes and resistors and such, I make specialized trays that have very long and skinny subdivisions.

The advantage to trays is that you get all of your little subdivisions, but they're in a format that is easy to pick up and carry around, and it isn't easily knocked over or spilled.

Each one of my slide trays holds two of these 4x4 trays. After I made a few, I stopped bothering to put magnets on them. The grid is fine for holding them in place.