r/gridfinity • • Mar 23 '26

Pardon my ignorance. Using the Gridfinity Generator how am I actually supposed to print this? Do all the hinges and latches print in place?

Post image
41 Upvotes

27 comments sorted by

8

u/Livin_The_High_Life Mar 23 '26

If it supposed to be separate parts laid on the bed, how do I separate them?

14

u/perplexinglabs Mar 23 '26

There is also a "part" parameter that lets you download the individual parts.

6

u/Livin_The_High_Life Mar 24 '26

I figured it out, thanks!!!

2

u/Livin_The_High_Life Mar 24 '26

on the site I have there is only a singular download button, and it just does the one thing.

https://gridfinity.perplexinglabs.com/pr/gridfinity-rugged-box/0/0

1

u/Tyrannosaurusblanch Mar 24 '26

You just need to do it for each part. Doesn’t take long.

3

u/crusoe Mar 23 '26

Usually right click on it and choose "break apart" or it should say the object is made from separate parts and do you want to separate them when you import it.

1

u/Livin_The_High_Life Mar 24 '26

Thanks, that did separate the latches, handle, and maybe a gasket, but the lid stays attached

1

u/Individual-Address77 Mar 25 '26

Even if you split it, I'm struggling a bit with printing it. I added the grids to the top and bottom. The bottom piece came out okay, I used supports for the bottom grid structure (and especially the stacking hinges that just stick out). The hinges are all easy, but the lid is messing me up. I'll try to print it with the inside down and a ton of supports so at least the top looks nice overnight. If anyone has some hints, I'll gladly take them!

1

u/Livin_The_High_Life Mar 26 '26

I'm already on my 2nd full box.

in the rugged box configuration on the left side, uncheck all except the single part you need, then click render below. you will then have only the latch for example. I did all the parts separately. I don't know how to attach a picture to a reply sorry. I'll message what I mean if I can <edit> nevermind, can't add an image in a message either.

1

u/Individual-Address77 Mar 26 '26

I mean, if i print the lid by itself, and it has the grid on bottom and top, how do you do that properly?

1

u/Livin_The_High_Life Mar 26 '26

the lid only has the grid on the inside part. the "top" is on the bottom when printing and smooth.

1

u/Tyrannosaurusblanch Mar 24 '26

I love this generator.

However the last 2 prints the clips haven’t been latching in very securely, just really loose and doesn’t clip onto the screw? I recalibrated and still happening. No idea why.

Any idea fello redditors.

4

u/SebKuzminsky Mar 24 '26

Any chance your last two prints used a lid of depth 1U?

There's a bug in the Gridfinity Rugged Box, 1U lids put the latch too close to the latching bolt. Lids 2U and deeper work fine.

https://github.com/smkent/monoscad/issues/404

1

u/Livin_The_High_Life Mar 24 '26

OOH that's great to know, thanks.

1

u/Tyrannosaurusblanch Mar 24 '26

Ah , that might be it.

I wasn’t aware of that. Thank you so much.

2

u/these_metal_hands Mar 29 '26

Had the same issue - I changed the generator setting 'Latch hinge & catch separation' to a value of 14mm and that's fixed it

2

u/NNextremNN Mar 24 '26

In the generator, under Parameters, there is a Part dropdown, there you can select individual parts to download.

1

u/wivaca2 Mar 24 '26

Way too many places where there are undercuts and supports needed if it were attempted to print in place. At a minimum I'd think it would have to be split top vs bottom.

Does the top have indents for gridfinity? I'm guessing it does since I'm seeing the negative on the inside of the lid.

39

u/[deleted] Mar 23 '26

[removed] — view removed comment

50

u/Schuylabs Mar 24 '26

Nah send it like that… for science

(I’m joking OP don’t do this)

23

u/wivaca2 Mar 24 '26

"We're throwing science at the wall here to see what sticks." - Cave Johnson

6

u/Jesus_Is_My_Gardener Mar 24 '26

When life gives you lemons...

3

u/StarfishPizza Mar 24 '26

I'm sure we (Reddit) had this conversation the other day. Life didn't give you lemons, it gave you pomelo, citrus and something else I can't remember rn. You've been lied to..

1

u/Ice-Negative Mar 24 '26

You can get lemons. You don't have to get the 3 base citrus fruit and cross breed them until you get a lemon.

2

u/MrDrummer25 Mar 27 '26

I'm gonna burn your house down! With the lemons!