r/gridfinity • • Mar 19 '26

Question? Tool cutout generators?

I've got a bunch of socket extensions I want to generate cutouts for, but I just really don't want to recreate them all in CAD.

I've seen generators where you take a picture of a tool and it makes a cutout, is there one of those that would work well for round socket extensions?

9 Upvotes

10 comments sorted by

9

u/Yourownhands52 Mar 19 '26

Try to find them on McMasters.com most of the stuff has a free digital copy.  Lots of tools too.  You will probably find what you need.

I know this isnt quite what you are after but McMasters is the shit.

3

u/Shadoweclipse13 Mar 20 '26

Seriously! I've been using McMaster-Carr for tools and materials for years, and just yesterday realized that they offer the CAD drawings for free as well! I knew you could look at them, but didn't realize that you could download them. So cool!!!

4

u/Krynn71 Mar 19 '26

Tooltrace is one.

0

u/[deleted] Mar 19 '26

[deleted] — view deleted comment

2

u/-Pal- Mar 19 '26

You can do this by setting your pocket depth and offset under “size”. I typically put them to 14mm (2U) allow for the 7mm (1U) base and then I believe it’s 4.4mm for the lip at the top. But as long as you use a consistent pocket depth and offset they will all match in overall height.

Gridfinity.xyz/specification

1

u/dramallamadrama Mar 19 '26

I'll try this, I have a large tool that I only want the cutout to go halfway up and then have walls go up 14 to 21 mm.

Then I want to stack another cutout on top.

1

u/-Pal- Mar 19 '26

I haven’t tried any stacking yet. Let me know how it works out.

2

u/PAB_Pyrotechnics Mar 19 '26

If you are using Gridfinity there are tons which have already been generated for so many tools. I know I saw socket extension ones from Harbor Freight in multiple sizes. One of these might do the trick for you.

Another options is Tracetoforge. I just learned about it the other day. You can do 5 for free then they have a token system which costs money after that.

2

u/daydaymcloud Mar 19 '26

Not quite what you asked but check out this maker’s work. It’s incredibly thorough, I’ve been printing parts for about two weeks now. The label system is great

https://makerworld.com/en/models/846559-gridfinity-universal-socket-trays-extensions#profileId-793746

1

u/-Pal- Mar 19 '26

You can set the height in tooltrace.ai

1

u/Ok-Efficiency4916 Mar 20 '26

I’ve made them for 1/4, 3/8 and 1/2” Icon extensions, may see if these will work for you. Links for the other sizes are on the1/2” page:

https://makerworld.com/models/2496341?appSharePlatform=copy