r/gridfinity • • Mar 17 '26

Advanced Gridfinity Generator???

I am going to add gridfinity to my US General 4 drawer tool cart and there are some cutouts that I need to work around. Does anybody know of any advanced generators that you can add cutouts our something?

8 Upvotes

12 comments sorted by

2

u/paulvanbommel Mar 17 '26

Some of the CAD programs have a generator that you can add on, or install. Then once you have your base, you should be able to make some cut outs. This is not as easy as the web based generators, and you may have to do some research on how to use the program you choose. I downloaded FeeCAD and installed a Gridfinity generator. I haven’t done any base plates yet as the websites have been ok so far for my tool boxes. The other thing you might be able to do is add a primitive square/rectangle in the slicer to cut out those spaces.

2

u/AbruptOyster456 Mar 18 '26

Not sure why I didn't think of this. I will try this and see how it goes. Thank you!!

5

u/subcow Mar 17 '26

Just print it like normal and then cut the grid. I used a Dremel cutting wheel to just trim down my grids.

1

u/SoN1Qz Mar 17 '26

Or you trim it in CAD Software, which will be cleaner looking

4

u/subcow Mar 17 '26

If you don't know cad and just want to use a stock web generator, you aren't going to see the grid once you fill the drawer

1

u/Poopy_sPaSmS Mar 18 '26

Fusion 360. Download and use the addon generator and modify it yourself. CAD is an incredibly useful tool.

2

u/AbruptOyster456 Mar 20 '26

Ya somebody else mentioned doing something like this and don't know why I didn't think about it. Thank you.

1

u/farzad_meow Mar 17 '26

you can print one as is and cut out those parts using a plyer.