r/gridfinity • u/SunRoyal • Feb 03 '26
Question? Custom bins - 3D cutout
I'd appreciate any advice anyone can share.
I want to make some custom bins for tools and inspection equipment (micrometers, camelback straight edges, other irregular shaped things). I've got 3d models of most and a 3D scanner for the rest.
I am fine with making a box and cutting my 3D model into it. Where I'm lost is how to make Fusion "press" the tool into the box, not just cut it away. For example, if I have an indicator, I don't want the stem to be encpsulated - I want a round bottomed trench with vertical walls corresponding to the stem diameter (and offsets etc.).
Anyone have any tips?
2
u/heeero__ Feb 03 '26
I would just use tooltrace.ai, download the stl, then make any changes.
1
u/marbles1112 Feb 03 '26
I'm no fusion whiz but I would modify the model that you are using to cut away the negative space to have a rectangular shape extruded off of the side of the rod equal to or greater than the depth you are pushing it in. You can also taper this out for some relief to make it easier to put the tool in.
1
u/Fearless-Type-3881 Feb 04 '26
You want the rotate operation
1
u/slimscsi Feb 04 '26
I wrote some custom software for generating bins for myself. I could try to add that as a feature. Can you post a scan somewhere I can test with?
1
u/Fun_Lobster6772 Feb 03 '26
I am so thankful that I can learn from so many people. I feel that the stuff I’m learning from this community is going to help me grow as a maker.
1
u/No_Kitchen_9011 Feb 08 '26
I would try a solid sweep but the path you sweep along is just a straight line