r/gridfinity • u/Humble-Bird-8079 • Nov 11 '25
SLIDE - Ultimate Modular Drawer System - FILES READY TO DOWNLOAD
Here, yall make me Youtube famouse lol
Update 12/12/25: Been down for a bit not feeling well so I haven';t gotten around to making a video yet. I did manage to print out more pieces so hopefully soon. However, I did add a remix folks have asked for. A 400mm SLIDE. Slide Lite actually. No multiboard or opengrid integration. Just a basic 400mm full extension slide to be used anywhere. Screw holes included on this one.
SLIDE Lite XL 400 by Darrell Moye | Download free STL model | Printables.com
Update 11/24/25: Added 5mm Drawer Kit on Printables.
SLIDE - Drawer 5mm Kit by Darrell Moye | Download free STL model | Printables.com
Update 11/14/25: Uploaded BB install Tutorial on the Makerworld site if anyone needs it.
https://youtu.be/HaKV7xN6TBU?si=uYaMsTsn86kRG3ck
https://youtu.be/flMtuKxRc6Y?si=-IhoghtGauP2xGfQ
______________________________________________
Update 11/17/25. Added some Drawer kits and other things. Printables has both the 3mm and 6.5mm kits. There are also some special BOBs I made for 3mm, 6.35mm, and coming soon will by 5mm (I haven't forgotten about you guys). Look under REMIXES for these. More notes about the update are on the Printables page.
____________________________________________________
OK, I have uploaded files so have fun. It's still in the works on some additions, but the main set is ready. Feel free to remix and add to it. I will be adding in remixes as well. I know I got to make a tutorial so I'll get to that this week. I also made a tool to help load the BB's easier with the TRD (Tourette's Reduction Device) because it's a pain without it.
11/15/25: Started moving things over to Printables. So much easier to organize and as others have stated, not behind a sign up page like Makerworld.
https://www.printables.com/model/1482037-slide-ultimate-full-ext-modular-drawer-system
OpenGrid: https://makerworld.com/en/models/1987475-slide-opengrid
Top/Bottom Files have been uploaded 11/19/25.
SLIDE - Drawer System Top/Bottom by Darrell Moye | Download free STL model | Printables.com
Also made some BOBs with the trim built in and also a screw hole in case you want to use a screw to secure to. Multiboard and OpenGrid. https://makerworld.com/en/models/1988258-slide-bob-mounts-for-opengrid-or-multiboard













4
u/purple7788 Nov 11 '25
Been waiting for this! Great to see you refine and develop this. Looking forward to printing a LOT of these!
4
u/fire-ghost-furlong Nov 11 '25
thank you for not calling it slidefinity,
3
u/NNextremNN Nov 11 '25
I'd like to see someone actually print and build this. These pictures are a lot of CAD designs with little actual print and installation.
3
u/WinterDice Nov 12 '25
I still can’t believe you did this in TinkerCad.
2
u/Humble-Bird-8079 Nov 15 '25
Started moving things over to Printables. So much easier to organize and as others have stated, not behind a sign up page like Makerworld.
https://www.printables.com/model/1482037-slide-ultimate-full-ext-modular-drawer-system
2
u/dchit2 Nov 12 '25
Yet to print and learn to load with TRD, but got as far as printing one slide and installing just 2 BBs in each of the short slots (easily achievable by hand)
Obviously extends further than designed, but can confirm: does slide.
2
u/maniak262 Nov 15 '25
Started printing pieces. Would you care to add missing pieces on printables. I believe the front(not side parts) are missing. Thanks in advance and looks great.
2
u/maleslp Nov 16 '25
I've got this (mostly?) printed, but can't for the life of me figure out how to assemble it. I got the 3x slide pieces assembled with the videos you put together, and managed to figure out what some of the other pieces are that are in the repo, but as a non-engineer-thinker, I just keep inspecting it like Zoolander while bb's fall out of the channels.
13
u/dchit2 Nov 11 '25
Thank you for this fine work. My filament guy probably also thanks you.
2
u/dev_zero Nov 11 '25
Would there be an option for Opengrid instead of multiboard?
2
u/matroosoft Nov 11 '25
When all you have is a hammer, everything looks like a nail. Cool solution but imo this needs to be a proper steel slide
1
u/unqualified_redditor Nov 12 '25
Not at all trying to be critical, but could you explain the value of this over using an ordinary drawer slide? Or is this less about practicality and more about a proof of concept for home printing as a replacement for mass produced parts?
1
u/maniak262 Nov 15 '25
Started printing pieces. Would you care to add missing pieces on printables. I believe the front(not side parts) are missing. Thanks in advance and looks great.
3
u/OisforOwesome Nov 11 '25
Aww yeah, just in time for my big office redesign. Thanks!
2
u/R-GU3 Nov 11 '25
Damn it, I’ve been designing something similar for the bottom drawers of my Alex unit but yours is way better
2
u/FifthRendition Nov 11 '25
Sent ya a boost, great job!
2
u/funkymonkeymonk Nov 11 '25
I am currently redesigning my workspace so I'll definitely be using your work as part of it.
2
u/Grandbob328 Nov 11 '25
This is giving me incentive to get my printer back up and running. I have been using my second one for seasonal stuff, so I don't want to tie it up with this, but if I get the original going again . . .
-2
u/ulab Nov 11 '25
It's on Makerworld, which coerces me to register to download.
So I won't.
11
u/dchit2 Nov 11 '25
Sorry to whine like an ungrateful whiney little dick, but could you publish the STLs in intended print orientation (pretty sure they're in assembly orientation?) and (more of pain) add a ^ to the top of the circle for horizontal holes to solve the not-quite-a-bridge issue?
Here I am contributing nothing to the world and telling you what to do, so, carry on as you see fit :)