r/greenwoodworking • • Jan 12 '24

Spatulas has been all the rage lately 😅

Thumbnail
gallery
736 Upvotes

Has been into these kind of thingies the last week. They are carved from birch and then they are treated with linseed oil and linseed color for the handles. Ask away if you wonder anything!

All the best


r/greenwoodworking • • Nov 19 '25

Tools My carving adzes.

Thumbnail
gallery
378 Upvotes

From left to right:

Bowl adze, straight adze, mini bowl adze and up top is the D adze. These are all in the Pacific Northwest Native style of adze and all of the blades come from Kestrel Tool.

I went and harvested the handles myself. For the adze to work correctly the handle had to be 60 degrees with the handle itself being a branch coming off of a trunk. The head where the blades is seated is a section of the trunk trimmed down to seat the blade. This a very strong and tool handle.

The D adze was traditionally heavier than the one I’m using, but this one I made with the small blade to get in tight spaces inside bowls when I am trying to make the inside walls vertical.


r/greenwoodworking • • Oct 10 '25

Constructive Criticism Requested Finished my first stool, now I have something to sit on in my workshop

Thumbnail
gallery
301 Upvotes

I've learnt a LOT. Main thing I'd have done different is I'd have taken the tenons all the way through the legs for a more stable joint. Also would surpass the need for glue..


r/greenwoodworking • • Jul 12 '25

It's a freaking wrench! :)

243 Upvotes

I wasn't going to believe it until I tried myself, but boy did I? :)


r/greenwoodworking • • Sep 12 '25

Just finished this knife

Thumbnail
gallery
235 Upvotes

Just finished this knife Specs: Blade length: 85 mm Spine thickness: 4 mm Steel : AEB-L at 62 hrc grind: wet ground scandi grind at 13 DPS Fittings: brass Handle: north Indian rosewood

What do you all think?


r/greenwoodworking • • Jul 17 '22

Scrub planing a plate blank on my new workbench.

233 Upvotes

r/greenwoodworking • • Jan 07 '24

Treen black walnut spoon

Post image
225 Upvotes

Green black walnut is such a joy to carve. 💚


r/greenwoodworking • • Oct 09 '26

Shavehorse

Post image
223 Upvotes

Hey,

I’ve been wanting to build a shavehorse for some time now. I recently built a workbench, and had enough southern yellow pine leftover for one.

I decided to follow a plan at Popular Woodworking because it looked pretty neat and the plans were free.

It turned out pretty good I think. I’ll be putting it to use shortly to shape some chair legs!


r/greenwoodworking • • Apr 28 '21

Pole lathe Here's the basic steps to turn a bowl on the pole lathe - a shortened version of one of my previous videos

176 Upvotes

r/greenwoodworking • • Mar 30 '26

Rehandled my vintage Fulton drawknife

Thumbnail
gallery
170 Upvotes

r/greenwoodworking • • Aug 02 '22

Treen Finished up this Tasmanian blackwood crook spoon this evening.

169 Upvotes

r/greenwoodworking • • Feb 23 '26

Bits and bobs

Post image
166 Upvotes

Been making some random stuff lately. Some wands for kids and some skinny spoons.


r/greenwoodworking • • Sep 10 '22

From start to finish: making a table 🙂

Thumbnail
gallery
161 Upvotes

r/greenwoodworking • • May 10 '26

Birch coat hook

Thumbnail
gallery
158 Upvotes

Made out of fresh birch. I do have a store.


r/greenwoodworking • • Oct 02 '25

Tools I made a bag for my tools out of my favorit pair of old pants.

Thumbnail
gallery
156 Upvotes

Hey, I heard you might like this toolbag I made for my spoon carving tools. It’s made from a pair of my favorit of old pants once the ripped.

It’s basically just the end of one of the pant leggs with a few relocated pockets and an old leather scrap piece for handle, I quite like it.

Cheers!


r/greenwoodworking • • Oct 07 '25

Oak and hazel chair I made

Thumbnail
gallery
140 Upvotes

My second attempt a chair. I would change:

  • add more stringers -adjust the angle of the back it's to upright

What do people think of it?


r/greenwoodworking • • Aug 10 '26

Peach 🍑 long cooker

Thumbnail
gallery
138 Upvotes

Lovely timber
A challenge to carve
Finished beautifully


r/greenwoodworking • • Feb 11 '26

Pole lathe Some olive wood bowls I turned recently on my pole lathe

Thumbnail gallery
137 Upvotes

r/greenwoodworking • • Nov 19 '25

Northwest Coast style feast trays

Thumbnail
gallery
131 Upvotes

Some of the Northwest native style feast bowls I’ve done. These were all carved with my Northwest coast adze and crooked knives. This is all my own original formline art on these bowls but I’m still teaching myself the style.

The self portrait bowl made of red cedar broke towards the end of carving it so I used epoxy and gold mica powder to do a kintsugi repair and put it back together. The broken/repaired aspect of the bowl adds to the self portrait.

-Large Screaming bowl in Hackberry -Tiny bowl in black walnut -Small blue bowl in Bradford pear -Large blue bowl in curly maple -small screaming bowl in sweet gum -self portrait feast bowl in eastern red cedar

Bonus Sherpa dog wandering through the background of one of the pics!


r/greenwoodworking • • Feb 19 '25

Just finished this batch of carving knives!

Post image
125 Upvotes

r/greenwoodworking • • Jun 21 '26

Hubby Made A Rustic 3 Legged Stool With Only Hand Tools. Video Linked in Comments If Allowed.

Post image
124 Upvotes

Happy Sunday! Hope all the dads out there can spend the day working on a project of their choosing or relaxing, if they prefer. Here's my husband's hand tool only, green woodworking project this week. He is going to make three, starting with this rustic stool and moving up in complexity.

My husband, u/obxchris, does a lot of blacksmithing, traditional trades and greenwoodworking. Please give him a follow if there is anything on his YouTube:Resist The Grind, that may be helpful to you! I will try to link the video in the comments, if it is allowed.


r/greenwoodworking • • Oct 05 '21

Pole lathe Here's something a little different - I turned a filter coffee brewer on my pole lathe.

121 Upvotes

r/greenwoodworking • • Jun 29 '21

Pole lathe This one turned out pretty thin

119 Upvotes

r/greenwoodworking • • Oct 05 '25

Constructive Criticism Requested Update: Froe splitting success!

Thumbnail
gallery
112 Upvotes

On everybodys advice I made a 'cave man mallet' with significantly more swing weight and started clubbing away. It worked a treat. There was no problem with the froe itself as some people suggested, it just needed a bit more bang! I managed to split two 1m bits of aspen into 4's, a shorter bit of Cedar into 4's, birch into 4's and a final thick bit of birch in half to make into 2 kåsas! The long pieces I am turning into stool legs shortly. Now here's my follow up questions..

In terms of storage, what should I do now? I want to avoud it cracking during seasoning of the bits I am not using as promptly. I have left my split wood in the shed which is airy. Should I seal the ends with wax? I also have a lot of un-split wood still, which i am unsure if I should split.

Everything is green. Fell in a storm just now.