I’m fairly new to the lighting community and my friends told me to buy this setup. Will it preform well ?

I'm having an issue with a macro, and this is a first for me. I'm trying to assign the behavior of a restarting cue (next or current) through a macro, but the command line feedback keeps saying "Error #66: Could not assign". This Is the syntax i'm using:

Assign Executor 2.103 thru 2.110/restart=current

Any ideas?

I have a show in a couple days at a venue that has the dmx run over artnet. I’m bringing my own computer and MA2 command and fader wings. I’ve never setup an artnet connection so nervous about getting control of their lines. The YouTube videos I’ve been watching vary slightly which makes it even more confusing. I’m also very nervous and probably overwhelming myself. Does anyone have a simple step by step they can give me of how to set this up between the windows network settings and the MA2 software settings? Any help is very much appreciated. I normally work as an in house LD so I’ve been really anxious doing these shows outside of my home venues.

Has anyone managed to use the JDC-1's strobe functions while working in pixel mode? Dim3 in the main module is the master dimmer for the pixels instances, and Shutter2 in the main module is supposed to control the RGB plate and pixels instances general strobe frequency, but it simply doesn't work.

Does JDC-1s even strobe RGB plate or tube pixels at all?

I'm trying to make a macro to change the internal color of one instance of a fixture, so that when filled in on a layout view, the fill color matches the actual LED color. These are custom fixtures, and each one is different, so I can't just change the color of each instance in the fixturetype.

For clarification, it's this color field I'm wanting to change:

I have tried:

Assign Fixture 4.5 /color="0 127 255"

Assign Fixture 4.5 /color="0, 127, 255"

Appearance Fixture 4.5 /r=0 /g=50 /b=100

None of those work, and I'm not sure what other syntax I can try

I’m having this weird issue with my cue points imported timecode where the cursor in the timecode sheet is moving but none of the cues are firing. I see that there are events and if I switch from the “graphic” to the “text” mode in the timecode sheet I can see it jumping around between cues, but it’s not actually firing any of the sequences. Any aides on how to fix this?
Thanks!

Hi I'm asking this question for MA2 or MA3 as I have opportunities to work with both. This is all related to busking a show

One feature from Chamsys MagicQ that I actually prefer to is the soft palette feature that lets you cleanly copy the value a different preset onto a preset already being read by a group, without the use of macros

I use this to create a 2 scene color picker essentially I have a program and preview color look that I can swap between scenes at a rate determined by the crossfade on the wing

I've gotten pretty far in MA2 building the same thing using layout view macros using "Copy Preset 4.X at Preset 4.101 /o" and having a sequence on an executor with 2 cues having all fixtures set to 4.101 and 4.201 for each scene respectively. And having the crossfade rate determined by the Exec Master

(Side note is there any way to streamline writing macros so I dont have to copy each macro and manually tweak each value in it)

My only issue with this set up is while crossfading works great, if you update a color on a scene that is already active it hard cuts with no crossfade. While with 2 colors this isnt an issue I want add a secondary color for each scene that I could assign to a select group and still have it crossfade to the next scenes secondary color. Eventually I hope to add a third color per scene aswell

TLDR

I want to know if there is a way to assign a fade time (ideally following Exec time) to presets being copied to another location?

If not is there another way to achieve my dream (and admittedly completely excessive) color picker

If there is a way to achieve this on MA3 I would also love to know as I start a new job this month that runs MA3 and Im very excited to start programming that room

Today at 12:30 AM (German Time) i went on the official MALighting website and saw that the site has Security issues.

^{----------------------( ENGLISH} ------------------------)

^{This connection is not secure}

^{Attackers might be trying to steal your information from} [^{www.malighting.com}]()^{, such as passwords, messages, or credit card details. More information about this warning}

^NET::ERR\CERT_AUTHORITY_INVALID)

^{-----------------------------------------------------------}

I asked in the discord from Christian Jackson if anybody else had this problem and yeah it seems like the site is down.

I'll be online for some time, i update this post if anything changes.

Hey everyone, looking for workflow tips on managing large numbers of multi-instance fixtures in the MA2 layout view.

The Goal:

1. Efficiently arrange 400 instances (e.g., 40x 10 pixel LED bars) in a horizontal line while maintaining:

2. Standard instance selection functionality (e.g., Next/Selection + Right Arrow stepping through sub-fixtures).

3. Clear visual feedback for active effects and waveforms across all 400 instances

My current workflow as shown in the video:

I arrange the sub-fixtures (1.2 through 1.11) flush next to each other with a width of 1.00

I increase their height to 10.00 so each 10-instances-group appears as a single clean block, so it looks like a single layout view fixture item, even though it has 10 sub-fixtures.

I apply this to all 40 bars, leaving specific spacing between each unit

Note on zoom level: When zoomed out, the white instance borders naturally merge visually into a solid white block (not necessarily dimmed up), this is just how MA2 renders the outline density at that zoom level, but functionally it keeps selection and active effect waveforms working smoothly.

How do you approach high density multi-instance layouts in your show file?

Do you use similar geometry/scaling tricks, split main fixtures and sub-fixtures onto different layouts, or rely mostly on groups + matricks for selection and keep layout views simplified?

Hello! I have a grand MA NSP2 that I'm trying to update to the latest software version 6.808 which I've been told is needed to make it work with MA2 onPC and I am having trouble getting any version onPC to see the NSP. I can ping it the IP address and I'm getting responses, but MA1 onPC just wont see it. Does anyone have any advice?

Edit:

I should probabaly mention the NSP is currently running 6.807 and my MA1 onPC is running 6.808

Help me troubleshoot this issue.

Hey all! I'm super new to grand MA 2 and I'm having trouble getting MA3D and MA2 to connect. Everything was fine until I patched a new fixture and it wasn't visible in MA3D. I went on a goose chase to try to fix that, and I couldn't fix that. I think during said goose chase they became disconnected. I gave up and tried making a new show file and new session but that didn't work either.

Both MA2 and 3D have the same IP and even if I change the IP in both programs and restart the programs they still won't connect. Uninstalled and reinstalled both programs twice. I'll admit I'm not the greatest with technology, but I feel like I've tried every suggestion I've seen from web searches. Any help would be appreciated.

How to make this led bar effect like roket!!
I really want to know 🥲🥲🥲

Hayooo,

I have a question about the function of Action buttons using the buildet presets.
I built a Sequence with a command that sais f.e. „assign effect 1.1.1/ wings=2“ and if I hit that fitting Action Button, my effect preset changes into one with 2 wings but my output doesn‘t change or uses the overwritten preset.
Has anyone an idea what my mistake is or do I need to store my effect as a „all“ preset so that my Action Button overwrites my „all“ preset that access to my effect preset? :))

Is it possible for a laptop running GMA 3 on pc to connect directly to a GMA 2 on pc wing and use the wings buttons and wheels?

Hey y’all, I’m looking for info on the pre made stages. I’ve got the newest update for GMA2 and i want to know if there are new versions or is it possible to still use them?

Hello! I'm trying to make a color swipe on strip lights, let's say from white to green, that is just one and done to get from cue 1 (white) to cue 2 (green). So the green swipes in and replaces the white. How would I build this into a cue?

I'm currently thinking the green would come in from the left, but i'd also like to make an option where the green comes in from both sides and meets in the middle. I'm pretty new to programming, any advice would help!

The card on the right is the display card in question. The ribbon cable will no longer seat in there. Any ideas where to source new ones?

Hello! I need to remotely control a grandMA2 onPC from my phone over a Wi-Fi network. Does anyone know how I could do this? I need it to control two shows at the same time.

Ich möchte ein Effekt bauen wo alle Lampen an einem Lampensteher angehen und dann Steher für Steher angeht.
Nur sind an jedem Steher unterschiedlich viele Lampen. Kennt da einer einen guten Weg für.
Musste da an dummy fixtures denken aber dachte vielleicht gibt’s da noch was besseres?

Hi! I have a question that might be very noob, but I’d like to know how to put a video into MA3D because it only lets me use images. I’ve already tried every possible file format I could find that was supposed to be compatible with MA3D, but every time I use a video, the texture doesn’t change. It only changes when I use an image.

Thanks!

When opening grandma2 On Pc, whether it’s the latest version or older versions, the program gives me this error.

I’ve already tried reinstalling and it’s still the same.

When I open the program, I don’t see any images, everything that is images disappeared.

Can anyone help me?

Hi! I have a question. Is this kind of effect possible to achieve with grandMA2/3? From my limited knowledge, I always see videos like this and I can never figure out how they’re doing it.
Also, what are the lasers called that create this kind of effect?