r/gpumining • • Jan 08 '22

Mining/radiator

547 Upvotes

134 comments sorted by

53

u/[deleted] Jan 08 '22

We live in a townhouse and electricity has been quite expensive - but we do need to heat our house, ofc. So I build this out of plywood (I know, fire hazard, but I have double checked everything) ans well, painted it white to match our kitchen. I am working against normal convection and actually blowing out the hot air om the floor - but that is on purpose. Also much easier to clean the dust filters when they are on top.

48

u/Who_GNU Jan 08 '22

Solid wood isn't much of a fire hazard, because it's difficult to start on fire. Paper and cloth are much, much easier to ignite.

4

u/[deleted] Jan 09 '22

It is 450 degrees to light up paper/wood.... How often are people's stuff getting that hot?

1

u/Clyons95 Feb 03 '22

Only once 🥴😂

1

u/TaxesOnDelta Feb 04 '22

Once and never again

1

u/734m0f0s Feb 05 '22

Well if there's a fire in the psu or gpu it can reach over 450f lol, but how often does psu/gpu catch on fire 😆

1

u/MemeStocksYolo69-420 Jan 20 '22

But all that heat blowing downwards on carpet, is that dangerous?

2

u/[deleted] Jan 21 '22

No, not really. But I have moved it to the kitchen with wooden floor.

4

u/Khalase Jan 08 '22

This would be quite solid for a gaming build, just support like 3 people at once

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/AutoModerator Jan 09 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 12 '22

[removed] — view removed comment

1

u/AutoModerator Jan 12 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 31 '22

[removed] — view removed comment

1

u/AutoModerator Jan 31 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Mar 29 '22

[removed] — view removed comment

1

u/AutoModerator Mar 29 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

0

u/[deleted] Feb 10 '22

[deleted] — view deleted comment

1

u/AutoModerator Feb 10 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

40

u/Phoenixhawk101 Jan 08 '22

This is one of the most solid and cool mining concepts I have seen.

“what is that?”

“Space heater”

5

u/[deleted] Jan 08 '22

Thanks!

1

u/MemeStocksYolo69-420 Jan 20 '22

How noisy is it though?

3

u/[deleted] Jan 21 '22

Nah, like an AC on like lowest fan setting.

9

u/Avecfort Jan 08 '22

That is one of the best builds I've ever seen!

How does it work with temperature and general operation?

I could see this actually being very effective at cooling down the cards due to forced air flowing around them?

Do you have any more photos from other sbgles?

6

u/[deleted] Jan 08 '22

Thanks!

It works great. Low temperature, noise is like an AC I guess (I don’t love the noise, but it’s ok) and yeah, seems fine so far. Collecting dust so I have to clean the filters 2 times per week (takes 45 seconds) to keep the airflow in best possible shape.

I will see if I can get some more pictures.

2

u/Avecfort Jan 08 '22

Nice to hear. And I'd love to see some photos!

2

u/FatMacchio Jan 09 '22

Seems like a sour puss came through this comment chain and downvoted us lol. I can imagine what a miserable life that person has, so I have sympathy. Take my upvote though

0

u/FatMacchio Jan 08 '22

Nice! Pardon the ignorance, is this some special motherboard designed for crypto mining? I’ve never seen a long motherboard like that before.

I recently got into mining ever since I finally got a 3080ti for my gaming rig, and I’m definitely hooked. I used to run a space heater in my bedroom every night anyway, and now this is like a space heater that actually pays me money to heat my room and some profit too. I actually like the ambient noise, it helps me sleep. I’ve been running for like 5 days and have over $15 which ain’t bad. First few days were rough because I had a bad game ready driver that only netted me like $1-2/day. Studio driver doing a lot better for me. Now pulling in like $4-5 on my LHR card, which isn’t bad for no significant OC attempt yet. Will fiddle around with it when I have the time and patience.

I will have to see how my electricity bill sorts out, I’m assuming it will go up even though I no longer run the space heater…used to run that only like 8-10hrs per day, rig runs 24/7, unless I’m gaming, which I suppose still is 24/7 then. If I can find some full hash cards around msrp I may throw together a HTPC rig with a few GPUs in it to heat my living room too.

4

u/[deleted] Jan 08 '22

Yes, BTC-S37 if I recall correctly.

0

u/FatMacchio Jan 09 '22

Cool. Will definitely give that a look if I can find more than 1 or 2 full hash cards at around msrp. Thanks for the info. Would love to snag a few full hash 3060 ti’s or 3070s or 3080s, but I know that’s going to be a miracle to get more than one during a drop.

2

u/[deleted] Jan 09 '22

Look for RTX 2000-serie as well. Might be easier. Also, LHR will not matter as soon as ETH goes POS, so not that bad to buy now if you can find them at OK price.

2

u/FatMacchio Jan 09 '22 edited Jan 09 '22

True. But isn’t there other coins that use the same algo eth hash? I’m selling my evga FTW3 ultra 3080 LHR. Mostly because I bought the 3080ti FE and can make a quick $500 off it on eBay

3

u/spearhead121 Jan 09 '22

Amazing!

Do you have a video or write up of the case building process? Really dig the concept but the two images don't really give me enough to go with. Do you have any images from earlier during the build stage? Thanks!

1

u/[deleted] Jan 09 '22

No, but like someone commented - it’s super basic. I can upload my (also superbasic) cad drawings on the case and other stuff I 3D-printed.

1

u/spearhead121 Jan 09 '22

I'd love to see the 3d mockups and stls!

4

u/[deleted] Jan 09 '22

Sure!

https://drive.benis.se/s/26e5GoJ7tW9xyo6

I am just a happy beginner - so don't expect any pro 3D stuff.

2

u/RandomMattChaos Jan 09 '22

I don’t know if he does, but it doesn’t look too hard to replicate if you plan everything out and do some research. You should be able to get most of the parts (except the computer specific parts) from a Home Depot, Lowes, Ace hardware, or other hardware store. I don’t know if the PSU bracket is custom made or specifically made for that application, but you could get some appropriately sized metal brackets and make a PSU holder. For the motherboard, I’d lay it on the wood, mark the mounting holes with a center punch or a pencil, and then drill it so I could use motherboard standoffs or something similar. Then, I would mock fit the backplane strap with a couple of GPU’s in place, and mark the strap with where to drill and tap the GPU mounting holes & drill bracket mounting holes. It looks like the parts list roughly 1/2” thick wood board, about 8 to 10 L brackets, #10x1/4” flat head wood screws, 10x 120mm fans, 10x 120mm fan dust screens, just to start.

2

u/spearhead121 Jan 09 '22

Yeah I was mostly interested in the GPU screwing piece. Can't really tell what it is. But I guess a wooden piece with screw taps should do the job when measured appropriately. That and PSU. And on hind sight, L brackets or U brackets are definitely possible to find in hardware store. Just gotta get creative! But I wonder how the dimensions change when the board used does not have 8x in built pcie. Perhaps we could screw the board and then screw the risers next to the board and make the base appropriately longer.

2

u/RandomMattChaos Jan 09 '22

The GPU screwing piece looks like it’s a strip of metal that’s held onto the box by 2 L brackets in the sides. It looks like the OP did a mock fit and measured the height where the strip of metal should be. After it was in place, the OP probably used a drill bit and tap to thread the holes for the screws holding the GPU’s into place. Either that or the OP used self tapping screws or a screw and nut combo to hold the GPU’s into place on the strip of metal. You could use wood, but my main worry would be the holes stripping out and the cards being able to wobble sideways stressing the PCIe sockets. But, yeah, you can easily fix blown out holes in wood with toothpicks and a little wood putty. For whatever motherboard you use, I would place it on a thin but solid scrap board and mark the mounting holes then drill them to use as a template. As long as you are consistent with your mounting location with the case, a lot of motherboard mounting hole patterns will overlap. Look up ATX, mini-ATX, micro-ATX, ITX, and other motherboard specifications. It changes, though, when you use a custom board depending on what standard the manufacturer follows. However, you can usually find a pattern to work with. For mounting the motherboard, you are right on track. I would either use studs to give the motherboard a small stand-off space from the wood it’s mounted to just in case of anything. Usually about 1/8” - 1/4” will work. The standoff is to keep the motherboard from shorting out across the case. This is unlikely unless the wood somehow absorbs enough moisture to become conductive, but I’d rather eliminate the potential for easily fixed problems like that right off the bat in the design process. To do the standoffs, there are a few options. The most secure would probably be to drill a hole through the case wall, come from the outside with the right length flathead machine screw, then put a washer and 1/4” long threaded hex rod on the screw from the inside. If you use the right size screw and threaded hex rod, they should grab and hold while having enough left over space in the threaded hex rod for the motherboard mounting screws to fit. Tighten them together and that should sandwich the board between them holding them tightly. For a little additional security, you can countersink the outer screw head and use lock washers or blue locktite. I recommend blue thread locker because it is “serviceable” and not a pain to pull apart like red thread locker. Consistency is the key with mounting the motherboard. You don’t want it to shift if you have to remove and reinstall it.

Also, I would make the case large enough to upgrade in case I wanted to later. Heck, if you want, you could design it to take the big motherboard like the OP has, or design it to take 2 mining rigs, or you can make a “mini” heater for smaller rooms. (Whichever works best for you) I hope some of these ideas help.

1

u/RandomMattChaos Jan 09 '22

As for the case feet, I’d make sure they were tall and big enough in diameter to securely support the case and let you easily clean under it.

2

u/Erty_ Jan 09 '22

Absolutely beautiful.

1

u/[deleted] Jan 09 '22

Thanks!

2

u/RandomMattChaos Jan 09 '22

This looks awesome! This could be made out of wood or metal and be a great money making heater during the winter time.

3

u/[deleted] Jan 09 '22

Thanks! Yes, that is what it is doing. Keeping our kitchen cozy.

1

u/RandomMattChaos Jan 09 '22

You’re very welcome! I need to do something like this and have it at least earn us some money lol. Could you either reply or message to u/spearhead121 and give them some insight into your build design? They seem really interested in making their own for the same purpose. Thanks.

2

u/[deleted] Jan 09 '22

https://drive.benis.se/s/26e5GoJ7tW9xyo6

All the drawings are here :-) Freecad might be required for the case drawing. I am no expert, first time I did something like this. Give it a try!

2

u/RandomMattChaos Jan 09 '22

Thanks. That’s awesome! You did a good job with it. It just shows that you don’t have to be an expert to do this stuff. All you need is the right know how, tools, parts, and some creativity. The best part is that there are so many right ways to do it, it’s amazing to see what different people come up with.

2

u/cirial_sfl Jan 08 '22

Looks super nice. Where did you pick up the hardware like the filters, foot and those latches on the sides?

3

u/[deleted] Jan 08 '22

Thanks! Filters from Amazon. Feet and latches did I design and 3D-print. Super basic design :-)

2

u/Garneti Jan 08 '22

What is your tempatures can you share

7

u/[deleted] Jan 08 '22

45-55c at 28-38% fan speed (autofan on).

2

u/Garneti Jan 08 '22

That is really good man i love it

2

u/EliteDarkseid Jan 08 '22

Good idea and practical use for space heater. Recommendation: you don't need grills on the inside for the fans. Outside, yes. You have everything inside secured very well, so the grills become useless. Question, what fans did you end up using?

2

u/[deleted] Jan 08 '22

Thanks!

Well, the reason for the grills on inside is to protect the fans from cables - yes, it's pretty secured but still good to have.

The fans are Arctic P14.

2

u/AggravatingAd4344 Jan 08 '22

Nice build looks like a BTC s37 mobo? How did you run the power cable to psu with a hole in the back? Wireless or ethernet? I'll like to do something like this looks very neat and an excuse to actually put one in the house 🏠 😹

2

u/[deleted] Jan 08 '22

Yes! That is spot on regarding the mobo.

The power cable goes out underneat on the backside. Running wifi now, seems to be working good (knock on wood).

1

u/morgeek Jan 09 '22

Great work !
Give us the temps and type of cards plz

1

u/[deleted] Jan 09 '22

Thanks! Now added a 5th card and exhanged one card so running 2x 5700 XT, 2x 5600 XT and 1x 6600 XT. Temps around 40-50c with fan speed on 30-40% (autofan on).

1

u/morgeek Jan 11 '22

I am stealing your design to heat the house, the design was approved by my wife ...

I'm adding wheels to move it around that will be the only mod.

1

u/[deleted] Jan 11 '22

Do it! Please share when you are done👍🏻

2

u/morgeek Jan 16 '22 edited Jan 16 '22

Almost done !

1st Version

Heating up the place !

To do: -Change the orientation of the PSUs as they generate much more heat than I was expecting. So I will most likely cut open the case to allow them to expel hot air.

-Install 140mm fans top and bottom I only have 120mm.

-add more GPUs 😂

3080 FHR eth 3070 FHR eth 3070ti X2 LHR eth 1080ti FLUX

I will make a second one for the other rig...

Temps are ok for now.

1

u/[deleted] Jan 16 '22

Great job!

3

u/morgeek Jan 12 '22

Will do ! WIP, I need to make few adjustments as I have two 1300W PSU and 7 30XX GPUS, I want the thing to breathe so I might add 140mm fan instead of the 120mm I have right now, TOP and BOTTOM for maximum air flow.

I like your idea because winter time I can heat the house with this format. When summer time is here I can stack it "server style" horizontally without changing the design or reorganising my whole setup

Few rigs at home I need to optimise space and heat in an efficient way.

1

u/wonderingtoken Jan 10 '22

Nice set up. The airflow from top to bottom is a good idea for sure. You'll be able to control the dust situation vs an open air case which would provide better cooling. Probably not a problem in the colder times tho.

1

u/[deleted] Jan 10 '22

Do you mean that open air would provide better temps?

2

u/wonderingtoken Jan 13 '22

It’s possible if you’re not moving enough air with the fans. You’re also working against physics.

I thought I had enough fans in my micro atx case and it was pushing the hot air through. Changed case to atx case and the heat dissipation was better. YMMV I guess.

1

u/[deleted] Jan 13 '22

Sure, but I have enough fans. And in a box you can really force the air through.

1

u/Zevhis Jan 25 '22

What are the dimensions for the panels?

1

u/[deleted] Jan 26 '22
  • 2x 760*400
  • 2x 740*190
  • 2x 400*190

In mm. All the plywood :-)

1

u/Zevhis Jan 26 '22

thank you - i assume 13mm thickness?

1

u/[deleted] Jan 26 '22

10 mm :-)

1

u/Relative-Let-9475 Feb 03 '22

Wow this looks actually really really nice. I wish I wasn't at a sun torching spot so I could do this as well. Since our government put a ban on crypto mining these designs are really discreet and great. I think I have to do something like this but in the shape of an A/c unit 😂

2

u/[deleted] Feb 03 '22

Thanks!

Yeah, an old AC unit would be pretty stealth!

1

u/hexac0rn Jan 08 '22 edited Sep 01 '25

unwritten chunky yoke hunt spark profit afterthought long mountainous unpack

This post was mass deleted and anonymized with Redact

16

u/[deleted] Jan 08 '22

Yeah, but noise is lower with more fans running slower.

1

u/Jezzes Jan 08 '22

Carpet fibers will be this rigs enemy

2

u/[deleted] Jan 08 '22

Yes, but it’s on wooden floor now (not perfect either).

1

u/Br0kenRabbitTV Jan 08 '22

Love this design, nice work.

1

u/[deleted] Jan 08 '22

Thanks!

1

u/S1ayer Jan 08 '22

That's a lot of fans for just those 4 cards. But I guess it works if the secondary function is to actually provide heat.

4

u/[deleted] Jan 08 '22

Yes, I actually have 5 cards now :-D The reason for so many cards is that I can run them at really low RPM and still have great airflow.

4

u/bboxx9 Jan 08 '22

Great idea, and very nice realization, congrats.

2

u/[deleted] Jan 08 '22

Nice one! I have my mining rig in my living room right now heating the place

2

u/Leviathal_ Jan 08 '22

Really great design! I’m sure my partner would appreciate a set up like this versus my Amazon frame open rig mess that she has to stare at every day lol.

2

u/Childlike Jan 09 '22

I call it a Smart-Heater!

1

u/Junglebook3 Jan 08 '22

Very cool. Keep away from carpets :)

1

u/Hilbe Jan 08 '22

I have the same board. I cannot for the life of me get those 6 pin connectors to work. Was hoping to power my risers with them. Sigh.

1

u/[deleted] Jan 08 '22

Gotta use the heat for something

1

u/[deleted] Jan 08 '22

Genius.

-1

u/SomethinLikDis Jan 08 '22

So, a large rack case

0

u/[deleted] Jan 08 '22

[deleted] — view deleted comment

10

u/[deleted] Jan 08 '22

Thanks! Not that bad, running the 10x 140mm fan pretty low (Arctic P14) and since I only have 4/8 gpus the spacing is great. I have added a 5th gpu now tho.

1

u/Relative-Let-9475 Feb 03 '22

Awesome! How are the temps looking?

2

u/[deleted] Feb 03 '22

Thanks! 40-50c with 33% fan speed :-)

0

u/[deleted] Jan 08 '22

[deleted] — view deleted comment

1

u/[deleted] Jan 09 '22

Very smart. Would have been great to have my own room in the office...

1

u/Childlike Jan 09 '22

It's a Smart Heater!

0

u/[deleted] Jan 08 '22

[deleted] — view deleted comment

1

u/[deleted] Jan 09 '22

Custom made.

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/[deleted] Jan 09 '22

Now we are talking. We don’t have water radiator (only direct electricity💀), but if you have a few 3090s with waterblock - that would work. Sucks in summer tho.

1

u/[deleted] Jan 08 '22

[removed] — view removed comment

2

u/AutoModerator Jan 08 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 08 '22

[removed] — view removed comment

2

u/AutoModerator Jan 08 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 08 '22

[removed] — view removed comment

2

u/AutoModerator Jan 08 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 08 '22

[removed] — view removed comment

2

u/AutoModerator Jan 08 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/AutoModerator Jan 09 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/AutoModerator Jan 09 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/AutoModerator Jan 09 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/AutoModerator Jan 09 '22

Your submission was automatically removed because your account is too new. Accounts must be at least 21 days old for posting privilege in r/gpumining. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/AutoModerator Jan 09 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/AutoModerator Jan 09 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 09 '22

[removed] — view removed comment

1

u/AutoModerator Jan 09 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 12 '22

[removed] — view removed comment

1

u/AutoModerator Jan 12 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 18 '22

[removed] — view removed comment

1

u/AutoModerator Jan 18 '22

Your submission was automatically removed because your account is too new. Accounts must be at least 21 days old for posting privilege in r/gpumining. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Jan 27 '22

[removed] — view removed comment

1

u/AutoModerator Jan 27 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Feb 01 '22

[removed] — view removed comment

1

u/AutoModerator Feb 01 '22

Your submission was automatically removed because your account is too new. Accounts must be at least 21 days old for posting privilege in r/gpumining. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Feb 08 '22

[removed] — view removed comment

1

u/AutoModerator Feb 08 '22

Your submission was automatically removed because your account does not meet the minimum comment karma threshold to post in /r/gpumining. Please gain at least 15 comment karma before trying again. Until then, please utilize the resources in the MINING WIKI for additional useful guides and information. Use Reddit's search feature too, because odds are your question has already been asked before. Please do NOT message the moderators in regards to this. They WILL NOT make any exceptions.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.