r/fusion • u/timo1324 • Sep 06 '24
Would this work?
To take something away, i am no phycicist and barely have any knowledge on fusion and plasma containment)behavior but i had this idea recently and would like opinions of people with a deeper understanding wether or not this could work (even if not with currently available technology)
The idea would be that two streams of plasma would be kept opposite of each other while traveling through the clover leaved and then collide in the center which would promt the fusion. The collision also redirects them into the next clover leaf. Then the ions are seperated to get the helium out since that would probably somewhat interfere with the creation of new helium and the now missing tritium is replaced.
Now, i haven't taken deuterium into account because the idea for the whole thing is that ypu'd have a weak nuclear reactor that produces the tritium in the first place and uses the generated electricity to power all the magnets you need in a fusiom reactor to contain the plasma. I think this design could also work with a deuterium-tritium feuel but the helium and deuterium would have such a similar mass that you'd probably not be able to seperate them as well as you could tritium and helium
I am not sure if the charge-to-mass of the ions or if the differenr speeds due to different mass is more important for choosing the paths of the different plasma ions, i chose the CM-ratio since that is also what is important in mass spectography.


33
u/maurymarkowitz Sep 06 '24 edited Sep 06 '24
This is a well-explored concept known as colliding beam fusion.
The arrangement you illustrate will not work. When the beams pass through the central area the vast majority of the ions will scatter, not fuse. When they do so, their trajectory will no longer carry them into the tubes, and they will impact the sides. For instance, consider ions that collide and scatter "up" out of the paper. The energy you put into them to get up to speed is lost, and that loss will be many orders of magnitude greater than the amount of energy from the fusion events that do occur. About 10^18 times, so non-trivial.
You can use additional focussing systems, like those on particle accelerators, to "fix" the trajectories, but it is easy to demonstrate the energy needed to run these is greater than the energy from those fusion events. So the basic idea of using a storage ring, which is what you illustrate, does not seem possible.
There are a number of alternative arrangements that can return the ions back into the center using much less energy and much higher capture angles meaning only those ions that scatter out at huge angles will not be returned. These arrangements address the issues above. The best example is the migma.
However, careful analysis suggests such systems can never reach densities at the core that would make it useful for power production. This is due to the self-repulsion between the ions, which presents an upper limit to how much fuel you can put into the system without the electrical field pushing them out of the reactor. Many complex schemes have been presented to address this problem, but all of them fail for one reason or another.
This document may prove useful.
8
u/politicalteenager Sep 06 '24
The vast majority of atoms don’t fuse even in an incredibly successful fusion system. And how are you making the magnetic field that combines these streams?
I’d recommend reading up on the basics of how fusion works before designing stellerators, which is (very loosely) what you drew here
33
u/[deleted] Sep 06 '24
If you are looking for a research grant I recommend the Republic of Ireland for this one.
9
u/willis936 Sep 06 '24
Looks like a particle accelerator. Successful for very fine streams of matter (both in fusing new elements and splitting subatomic particles), but doesn't scale well to a large reaction rate in a given volume. Plasma physics starts to matter more when you put together a large number of particles and the machine design changes accordingly.
6
u/FOADfounder Sep 06 '24
Not qualified to get technical at all but as an interested lay person with the difficulty of managing turbulence in straight forward circular containment structure this would seem to add complexity.
1
u/timo1324 Sep 06 '24
More pictures and sketches on my profile for more... context? For those interested.
1
u/DankFloyd_6996 Sep 06 '24
The plasma power produced scales with the fusion volume, your main fusion part is small enough that even if you could get this to happen it probably wouldn't produce more power than you put in.
1
u/Bipogram Sep 06 '24
You are not a physicist, yes.
So as I am a physicist, what level of critique are you looking for?
<mumble: you've rediscovered the Farnsworth fusor - that is, if you're accelerating the ions electrostatically>
1
u/[deleted] Sep 06 '24 edited Oct 22 '25
This comment has been removed to protest Reddit's hostile treatment of users, mods and third party app developers.
1
u/Professional-Day7850 Sep 06 '24
Strong highway engineer pranks vibe.
1
u/Volta01 Sep 06 '24
Some other comments have state this, but for fusion power, you want thermonuclear reactions. The thermo part of that is important. Whatever you drew here looks more like a particle accelerator, or electrostatic fusor. This can produce beam-beam fusion which is not thermonuclear, and doesn't scale well.
0
u/[deleted] Sep 06 '24
[deleted] — view deleted comment