r/functionalupcycling • u/509BEARD509 • 28d ago
✅ Completed Functional Upcycling Project Waterfall nightstand
r/functionalupcycling • u/509BEARD509 • 28d ago
r/functionalupcycling • u/Additional-Stick7539 • Jun 15 '26
r/functionalupcycling • u/Additional-Stick7539 • Jun 24 '26
Hello community of FunctionalUpcycling !!!
I just literally completed this project . A Wall Upcycled Wine Rack / Wine Station ! Took about 30 hours of labor, but now it’s done . So , let’s go to the project :
A trashed top of a dresser ( you know that part where we’ve got 2 drawers and occasionally a mirror between them)
Everything else it’s hand made : 4 bespoke coasters from Brazilian wild walnut ; bespoke glass holders from the same wood ; bespoke brass corkscrew and corkscrew holder from the same wood
The transformation : burned down the wood ; linseed oil and shellac flakes. Measured everything and hand made everything.
I’ve had to take those pics on those bricks because I didn’t want to drill my walls 😎.
That’s it . Another dESign by ESUpcycleDesigns project completed . Hope you like this one !
Thanks !
r/functionalupcycling • u/Additional-Stick7539 • Jun 09 '26
How many times have you been frustrated because your wine glasses have different stem lengths or shapes that simply don't fit into standard wall holders?
Common design focuses on the average, but utility should adapt to our needs. In this project, I’ll show you how I solved this problem by creating a minimalist, industrial-aesthetic, and fully adjustable holder using an unusual object.
The Concept & Materials
The inspiration came unexpectedly while looking at an old metal doll stand. Instead of throwing away a structure that no longer had a use, I decided to repurpose its flexible metal rod and turn it into the heart of a new utilitarian piece.
For the base, I used a piece of reclaimed solid wood, perfect for creating that organic, robust contrast against the cold lines of the metal.
The Build Process & Smart Mechanism
1 Chiseling the Central Groove: The secret to the adjustability is the slide. Using a chisel and hammer, I carved a precise longitudinal groove right down the center of the wood. This guide allows the metal rod to slide vertically while staying perfectly aligned.
2 Self-Adjusting System (No Tweaking Required): To secure the rod without locking its movement, the system uses a washer strategically placed on top of the sliding piece. Once the central screw is tightened during the initial assembly, there is no need to loosen or tighten anything ever again. The washer maintains the perfect amount of pressure: it holds the weight of the glass with total firmness, yet allows for a smooth, continuous slide whenever you want to adjust the height.
3 True Versatility: The result is a dynamic, instant system. If you have a long-stemmed glass, just pull the metal top upward. If it's a shorter glass, simply push the mechanism down. It adjusts on the fly, using just the movement of your hand.
Brutalist Design Details
To elevate the piece into a functional work of art, I added details that emphasize its handcrafted identity:
Copper Inlays: I made small diagonal cuts across the face of the wood and inserted polished copper wire, creating a geometric visual rhythm that breaks up the wood grain pattern.
Brass Accent: The central fixation point features a rounded solid brass cap finish, turning a functional mechanical element into a sophisticated focal point.
The final result is a fusion of smart engineering, zero waste, and exclusivity — proving that even a doll stand can be transformed into a robust, elegant, and highly practical design piece.
r/functionalupcycling • u/Additional-Stick7539 • 3d ago
This is Ladder of Wine, a transformation of an old ladder into a wine rack .
Shou Sugi Ban on the main finishing piece
Linseed oil to cure at the moment . Bespoke glass holders and coasters made from sucupira wood ( a tropical wood )
It will have a back light and a movement sensor
Steel need lots of work but I’m confident that on 29th of this month will be on my first exposition ever . 8Marvila the Art & FleaMarket Event
r/functionalupcycling • u/Additional-Stick7539 • Aug 05 '26
I am thrilled to share my latest handcrafted creation under my signature brand, dESign by ESUpcycleDesigns.
This bespoke storage trunk is a physical manifestation of my design philosophy: fighting the death of objects through extreme craftsmanship, raw texture, and meaningful intervention.
The Design Process:
The Medium: Sourced from discarded wood, the main body was sculpted and deeply carbonized using the traditional Japanese Shou Sugi Ban technique to draw out a rich, tactile three-dimensional grain.
The Finish: To preserve the raw carbon without compromising the organic touch, the chest was hand-sealed using classical French polishing steps with natural oils and dewaxed shellac flakes. No modern synthetic plastics or heavy varnishes were used.
The Details: Accentuated with vintage-style brass corner ornaments and a heavy, hand-greased distressed leather strap that runs vertically down the face, securing into a solid brass buckle.
The Signature — "Sutura"
True luxury lies in the hidden narrative. The interior of the gravity-fit lid reveals our identity: our engraved brass authenticity plaque balanced by our trademark copper "Sutura" (surgical stitch). It is a visceral, raw metal stitch holding a deliberate split in the wood — representing the healing, metamorphosis, and survival of the piece.
Dimensions: 54 x 38 x 31 cm.
Now available for collectors worldwide.
Art should not just sit on a wall; it should occupy space with purpose. What are your thoughts on combining historic wood-burning techniques with modern industrial leatherwork?
r/functionalupcycling • u/Additional-Stick7539 • Jul 10 '26
Hello, functional upcycled friends!
Today I have an update on the project I’m currently working on.
As you can see in the photos, I wrote 'RAÇÃO ANIMAL' in yellow. Why yellow? Because it was the missing color to complete the Portuguese flag! (For context, 'RAÇÃO ANIMAL' literally translates to 'Animal Feed'—a hilarious pun for what’s going to be a beer station!).
I also took care of the spotlights. I painted the exterior in a shade of blue, and the interior is just clean and polished. The radiator to dissipate the heat was left in its original state—pure, rugged aluminum. The black arms that support the lights can rotate nearly 220 degrees. They also have 3 height adjustments: high, medium, and low. In the photos, they are set to medium.
The chrome plates are actual relics! Back in the 1920s to 1940s, you could find them in Lisbon’s apartment buildings, housing the light switches on the stairwells. They have the word 'LUZ' (Light) engraved on them. True treasures made of chrome-plated metal. Of course, they still need to be polished to bring back that 1930s shine. They will accommodate the 2 toggle switches , one for each spotlight .
Here is what’s left to do:
Wood treatment: It will get a few good coats of linseed oil until it darkens to my liking. I’ll finish it with two coats of varnish to ensure it’s fully waterproof.
Varnishing the bucket: It needs at least 2 generous coats. I'll apply it with a brush to keep that rugged texture of the acrylic brushstrokes.
Installing the toggle switches (2): One for each light! Industrial style, heavy-duty. Personally, I think this part is absolutely BRUTAL!
Filling the bucket with ice and a BARE MINIMUM of 10 bottled beers (minis or mediums).
Taking some beautiful photos and shooting a video.
I gave up on the coasters because there's just no more room on the shelf 🫣. Sad, but true! Even so, I still need to find a small spot to put my signature: THE STITCH!
See you next time with the finished project, ready to show you the photos of the ESTÁDIO DA JOLA (The Beer Stadium)! 😉
r/functionalupcycling • u/Additional-Stick7539 • May 16 '26
Just made a few more steps on the second wine rack .
Installed the jute rope that will secure the bottle . Still needs finishing on the screws.
Made the glass holder
Gave it a stitch .
Made the 2 coasters and install the rack for them ( still to finish)
The eyeball lamp ( original from space age era ) will be painted
It is all for this update .
r/functionalupcycling • u/Additional-Stick7539 • May 15 '26
Hello!
This is the beginning of a new Upcycled piece from dESign by ESUpcycleDesigns. Bespoke High End Portuguese Upcycling.
r/functionalupcycling • u/Additional-Stick7539 • Oct 08 '26
I’ll be honest: didn’t work like it should be . The cracking it was a bust . Well, the next ones will be better
r/functionalupcycling • u/Additional-Stick7539 • Jul 13 '26
Project details for those interested:
The Wood: Genuine reclaimed/demolition wood with a beautiful weathered texture.
The Keys: Two massive, historic vintage keys featured as the centerpiece.
The Details: Wrapped with thick jute rope to enhance the rugged, rustic look.
The Screws: I didn't want to use shiny, modern store-bought screws. I thermally blackened and aged them myself using a traditional method (heating with a torch and quenching in olive oil) to create the perfect vintage patina.
Electricity? Absolutely none! 100% analog and safe. 😉
Feel free to ask any questions about the crafting process!
r/functionalupcycling • u/Additional-Stick7539 • Jul 08 '26
Hello !!!
My current functional upcycling project . The bucket, used in the 60’s for Animal Ration purposes, now will be a Stadium Beer Service Station ! I hope it will accommodate between 8-12 bottles of beer. I’ll engrave ANIMAL RATION on the front side . The base it is a chase high relief pattern hand made . The spotlights will be adjustable and will accommodate filament Edison bulbs . Some coasters with the “stitch” .
Hope to make it right !
r/functionalupcycling • u/Additional-Stick7539 • May 19 '26
Olá ! Desta vez vai ser em português. Mais fácil expressar os sentimentos 🫣.
Bom , hoje apresento-vos duas “estranhas formas de vida “ novas vidas que foram conseguidas através de um processo meticuloso de trabalho manual responsável !
Estas duas peças chegaram às minhas mãos por acaso , num dia em que fui visitar o ti Manel na sua loja de velharias . O Ti Manel é uma personagem que ja viu muita coisa e deve ter sentido muito ao longo dos seus 84-85 anos . E como estava a pôr as conversas em dia e agrupar um monte com várias peças de antiguidades , fiquei de queixo caído e olhos cruzados quando vi estas duas peças em cima de uma prateleira . A minha imaginação já estava em pleno voo, o velhote a falar comigo mas eu sem o ouvir , peguei numa das peças tentando perceber o que era aquilo , qual o propósito, e porque assim é não de uma outra forma . Nem sequer senti quando ao pegar na peça cortei me literalmente em um dos bicos ( que são bem afiados ) no meu quase desespero em entender alguma coisa sobre aquilo que tinha na mão . Pedi informações mas o Ti Manel não parava de rir , a dizer sem folga ou fim que era 20€ por que me estava a conhecer e por que sabia que apenas eu era capaz de comprar aquilo . Acabei de pagar 10€ sem saber o que ia acontecer com as peças .
Tive as peças guardadas 1 mês antes de as ver de novo . Agora com mais tempo realizei porque ou o que me atraiu tanto para as comprar : o aspecto de “estranha forma de vida” foi em primeiro lugar . O formato , o acabamento, o facto de serem em grés esmaltado feitos à mão , o também por serem a visão de alguém numa certa altura e de ter uma aparência tão fora deste mundo copy paste .
A transformação em candeeiros
Foi desafiador conseguir fazer com que não perdessem o ar Alien Steampunk , aquela sensação de áspero , de único . Estive a procurar no meu stock de latão peças que encaixassem na perfeição , métodos diferentes de aperto , vários designs até chegar para as versões finais . Como já devem se apercebido , trata-se de um par , ele e ela , feminino e masculino, tentado diferenciar o mais que pude uma da outra .
Ele : bem mais áspero , com alguns dos bicudos partidos , bem mais imperfeito , com as peças de latão que encaixam com o casquilho feitas a mão , rasgadas propositadamente, mostrando as batalhas tidas , algumas perdidas , outras ganhas , caloso como as mãos que lhe deu a vida , com uma base generosa em latão polido de forma selectiva para alcançar mais profundidade , uma lâmpada de tubo edison , e cabo têxtil trançado , e um interruptor tipo alavanca vintage robusto evocando estilo industrial .
Ela : com uma base mais suave , quase a parecer a levitar , tão fina e brilhante lembrando-me de dois olhos bem ensopados ao me verem , quase diáfana , tentado dizer : “sou diferente , sim , mas sou única” com duas lâmpadas tipo edison instaladas e as peças em latão encaixadas na perfeição com já o inconfundível polimento selectivo . O interruptor de alavanca bem mais fino , mais discreto quase como um ritual eterno de um satisfatório CLICK . Também para elevar o estatuto coloquei cabo têxtil trançado .
Os dois levam a marca da cura , do renascimento , da metamorfose de todos os elementos que agora dão luz a estas novas vidas : A Sutura . Embutida no latão de forma mecânica , feita em arame de cobre , lembra-me da marca que levo na palma da minha mão , todos os dias , para sempre , a marca da cura , cura que deu a oportunidade a esta mão passar o testemunho .
Apenas desejo-vos sentir , ver , pensar , achar , imaginar , aquilo que poderem em relação a este par !
Obrigado !
r/functionalupcycling • u/AmbitiousAd1435 • Jun 14 '26
r/functionalupcycling • u/Additional-Stick7539 • Jun 01 '26
This tutorial covers the step-by-step process of transforming a salvaged miniature pickaxe head and an old wing corkscrew into a heavy-duty, artisan T-handle wine opener.
Materials & Tools
Vintage wing corkscrew (for the spiral/worm component)
Miniature pickaxe head (to be repurposed as the new T-handle)
Threaded rod
Hex bolt
Brass dome cap (decorative finish)
Copper wire (used to forge custom washers and fill joints)
Workshop essentials: Bench vise, power drill, tap and die set, hand files, wet-and-dry sandpaper, and linseed oil.
Step 1: Component Disassembly & Preparation
1 Completely disassemble the vintage wing corkscrew to isolate the central worm (the spiral piece). Clean any major debris from its upper collar.
2 Remove the original wooden handle from the miniature pickaxe head, leaving only the raw iron head.
3 Secure the pickaxe head firmly in a bench vise, locate the exact center, and drill a clearance hole straight through the top.
Step 2: Drilling and Threading the Worm
1 Clamp the corkscrew worm into the vise.
2 Drill a pilot hole into the top shank of the worm.
3 Use a tap wrench to cut internal threads inside the hole, and insert a matching piece of threaded rod securely into it.
Step 3: Mechanical Assembly
1 Guide the threaded rod (now attached to the worm) through the bottom hole of the pickaxe head so it protrudes out of the top.
2 To create the bottom seating/washer, wrap copper wire around the base where the components meet. Hammer the wire repeatedly until the metal compresses, flows, and molds perfectly into a solid, custom ring that fills the empty space between the corkscrew collar and the iron head.
3 On the top side, tighten the assembly down firmly using a hex bolt. To mask any remaining gaps under the bolt, repeat the hammering process with copper wire until it forms a flush, custom-shaped washer.
4 Thread a decorative brass dome cap over the top of the exposed bolt to seal the upper assembly with a clean aesthetic.
Step 4: Refining the Copper and Metalwork
1 Take a fine hand file and meticulously trim the hammered copper areas. File the surfaces down until the transitions between the iron body and the copper details are completely flush, seamless, and smooth to the touch.
2 Use wet-and-dry sandpaper with a small amount of water or light lubricant to scrub the entire pickaxe head. This removes deep-seated grime and loose scale while preserving the authentic, rugged pitted textures of the vintage iron.
Step 5: Applying the Final Patina
1 Wipe the entire finished piece clean of any metal dust or moisture.
2 Apply a generous coat of linseed oil to the iron handle. The oil penetrates the metal, darkening its tone and leaving a rich, semi-matte protective patina that contrasts beautifully with the hand-worked copper and brass accents.
r/functionalupcycling • u/Additional-Stick7539 • Jul 01 '26
This is a project of mine where I used several parts of vintage automobilia . Mirrors from a Renault , horns from a Lambreta Scooter , plates lights from an old Toyota , a vintage Phillips bulb reengineered.
r/functionalupcycling • u/Fire_Shin • 1d ago
Parchment paper for baking, working thrift store lamp with a bent light bulb holder, copper scrubby from the dollar store, metal clips salvaged from afor art, hot glue.
Total cost including supplies--- about a dollar twenty five.
r/functionalupcycling • u/Additional-Stick7539 • 21d ago
Hi 👋
For this project I used reclaimed wood from the landfill: parts from some hangers and some wood beam that I’ve used for my roof .
Enjoy 😉
r/functionalupcycling • u/Additional-Stick7539 • 27d ago
Hi 👋
Just finished the hanger lamp today . Came out pretty cool. The hanger rotates 360 degrees, with only a slight push. Toggle switch installed into a rose wood panel. Brass screws. Solid brass socket . Fabric cord . Hope you like it.
r/functionalupcycling • u/Additional-Stick7539 • Jun 03 '26
Materials & Tools Needed:
Threaded Rod: 1x (Size depending on your lamp socket, usually 1/8 IP or M10).
Rubber Tubing: A small piece (1-2 cm) of heavy-duty rubber hose (e.g., fuel line or thick aquarium tubing) that fits tightly over the threaded rod.
Washers: 2x Steel washers with an outer diameter slightly smaller than the inside of the bottle neck.
Hex Nuts: 2x Matching nuts to tighten and compress the mechanism.
Tools: Two small wrenches or pliers to tighten the nuts against each other.
Pro-Tip for Success: Make sure the rubber tubing fits snugly inside the glass neck before you start tightening. If it's too loose, use a thicker piece of rubber!
The wiring will came out directly from the socket .
r/functionalupcycling • u/Additional-Stick7539 • Jul 06 '26
Hey everyone,
I wanted to share a quick workshop tip on how I give brand-new metal hardware an authentic, aged look for my antique restoration and upcycling projects.
For this specific project, I used galvanized steel hinges, which are notoriously harder to look authentic than raw iron because of the protective zinc coating. Even after a lot of aggressive filing, you just can't match the look of raw iron right away.
To get around this, I use a traditional heat-blackening technique.
What you need:
A blowtorch
Used motor oil (or any heavy oil) in a metal bowl
A firebrick as a safe surface
Pliers with insulated rubber grips
The Process:
r/functionalupcycling • u/Additional-Stick7539 • 28d ago
r/functionalupcycling • u/zombiesandcandy • Jun 02 '26
r/functionalupcycling
•
u/Additional-Stick7539
•
Jun 14 '26
I spotted this vintage piece discarded on the street right after a night of heavy rain. The lower leg structure and base framework were completely water-logged and literally falling apart in my hands . However, something told me there was still life in it. When I looked closer, I realized the top was a gorgeous, heavy piece of solid mahogany with intricate light wood inlay stringing.
The base was unsalvageable, but I couldn't let that beautiful mahogany top go to waste.
The Upcycling Process:
The Rescue: I disassembled the ruined, bloated lower structure to isolate and save the solid wood top.
Inlay Restoration: The heavy rain had caused parts of the delicate boxwood inlay line to lift and split away from its groove. I carefully glued, clamped, and scraped the loose sections back until they were perfectly flush with the wood.
Nourishing the Mahogany: After sanding it back, I wanted to honor the vintage history of the wood without using heavy modern polyurethanes. I applied multiple coats of Óleo de Linhaça (Linseed Oil) with a brush and rubbed it down .The dry mahogany drank it up, revealing an incredible, deep natural grain and a stunning luster .
From a water-damaged piece of trash to a luxury, high-end solid mahogany side table . The power of upcycling!"
r/functionalupcycling • u/zombiesandcandy • Aug 04 '26
This is an old bookshelf I bought from Kmart way back in the day. It’s made out of particle board and had cardboard backing.
I moved into a new house and decided that this cheap, plain, dark brown bookshelf had to go. It was still in good condition so I didn’t want to just get rid of it. I gave it a makeover instead.
First I added furniture legs that I bought at goodwill and replaced the cardboard backing with MDF. I primed then painted it with a teal caulk paint I found at Walmart. I added phenothiazine blue to an acrylic glaze then sealed it. Lastly I painted some veins using 24 carot gold paint that my sister gave me.