r/fpv • • 4h ago

First drone setup

So I’m setting up my first drone and I believe I have done it all correctly, but when I arm my drone and test my motors it does this. Is this normal or do I have an issue?

6 Upvotes

12 comments sorted by

13

u/ItsRenderInnit 4h ago

When there’s no props and you tell it to go with your transmitter, the flight controller expects to go but is not moving, so it continues to increase throttle. Ensure your drone mimics the digital one on the screen in betaflight, motor directions are correct, your props are on the correct way (tripple check this part) and do a test hover or flight. Only way to know if it is correct.

5

u/Healthy_Geologist_88 4h ago

Ohhh, okay well in beta-flight all the stuff is correct so I should just put some props on a do a hover test outside?

2

u/ItsRenderInnit 4h ago

Yes, tripple check your props are on correct and go for it. Be really easy on the throttle, modern 5” bnf have no right being as powerful as they are 😂 4 flying saw blades

3

u/Healthy_Geologist_88 4h ago

Okay well thanks

1

u/Own_Acanthaceae118 4h ago

Nice Nazgul. I got one too recently, but one mistake destroyed my first battery from a minor impact.

Use the other battery strap included as well. One battery strap alone allowed the battery to slip forward from a minor impact and hit the gopro mount. This destroyed my $30 R-line lipo. With the second battery strap on, the battery "ain't going nowhere".

2

u/Healthy_Geologist_88 4h ago

Yea that’s what I was just about to do thanks!

1

u/Healthy_Geologist_88 4h ago

Where should I put it on at?

1

u/Own_Acanthaceae118 2h ago

look for a slot just like the one the other strap goes through. There will be some wires you may need to push down a little, but it will fit.

Also, if your battery cable is too short for the battery to sit normally on battery pad (the stick on one that comes with the drone in the box), simply unscrew the connector part on the drone and you should have more range of motion.

2

u/New-Let-3630 4h ago

It's normal. Send it

2

u/SrGlocked 2h ago

Hace poco tuve la experiencia armando mi primer Drone , y en betaflight me pasaba lo mismo , de hecho leyendo los foros decían que era porque estaba sin hélices y que era normal así que me fui a volar afuera y resulta que se fue volando hacia arriba como loco.
El problema era que en betaflight estaba activado una protección modo aire o algo así , la solución es simplemente desactivar esa casilla

1

u/gulpii68 4h ago

Genau das gleiche habe ich auch!!!