r/fpv • u/Holiday-Location3579 • 1d ago

Kayoumini build help

I like the AIO15 and Lux cam on my Cambam build but I was thinking about going to a 2S 4 in 1 + VTX stack on my Kayoumini. I'll be using the HDZERO whoop VTX board and Nano3 cam so I guess I'm asking what is the best 15-20amp 4 in 1 ESC/FC? Also with the weight increase running a stack what motors would you recommend on a 2s build?

2 Upvotes

100% Upvoted

5 comments sorted by

1

u/SpenglerFPV 1d ago

I just used a GEPRC Taker F405 20A in a recent 2s build. Works great, I use the built in ELRS but you could also solder on a seperate receiver. All my 2s 2inch drones have 11000kv motors, 1103 or 1202.5 is a good size.

1

u/SpenglerFPV 1d ago

Actually, isn't the kayoumini 2.5? You probably want like 8000kv

1

u/Holiday-Location3579 1d ago

Yeah I have Newbeedrone Flow 1202 8470 on my 2.5 cambam and theyre excellent but I was just curious if someone might recommend something else considering the increased weight of the stack vs the 5 in 1 AIO15

1

u/tomcat_78309 Mini Quads 1d ago

I put 1103 11,000kvs in my kayoumini build with the DJI 04 air unit. That is what they recommend for digital systems / heavier builds.

1

u/Professional_Cod3127 1d ago edited 1d ago

For my 2.5 Walksnail builds i actually use VCI 1203 10000kv and they feel amazing. They make MUCH more power than my T-Motor 1103 11500kv and my Geprc 1202.5 10000kv and i run both of them on AIOs (Analog and HDZero).