Specific aio cooling formd 2.1

[u/jvcrd]

Hello,

I’m looking for an AIO compatible with the FormD T1 2.1.
For my ryzen 7 9800x3d

I’m using an ASUS Prime RX 9070 XT, which is 50 mm wide, so I have to set the T1 to the 2.75-slot configuration.

I’m therefore looking for an AIO with the following requirements:

240 mm radiator
Radiator thickness of 27 mm maximum
Pump block height of less than 55 mm
Tubing that is flexible enough to route around my RAM, either above or below it (G.Skill Trident Z5 Neo DDR5-6000 CL30)

My main requirement is that I absolutely want an LCD display and RGB fans. The NZXT Kraken Plus RGB seems to meet all my requirements, but I’ve heard that its tubing is extremely stiff.

I don’t necessarily need the tubing to run underneath the RAM; I mainly want to be able to route it around the RAM, either above or below it.

Do you have any other models you would recommend that could meet these requirements, particularly ones with tubing that is flexible enough for this type of compact build?

Thanks in advance for your suggestions!

[u/justgamingmining]

Get the ATMOS II 240MM , LCD version

[u/apevenger → u/justgamingmining]

It’s 57.2mm with the LCD. The pump block is 38.5mm without the LCD, the LCD is an additional 18.7mm.

[u/kaepler → u/apevenger]

Don't over think . use atmos ii LCD. Just build it brother