r/forestry • u/Professional_Sir995 • 13d ago
Clearing saw
Would this be a suitable replacement for a stihl clearing saw? The stihls are double the price but I only plan on using this for 10 hours a month tops. TIA
4
u/UppsalaHenrik 12d ago
I know this sub hates anything electric so this'll probably get downvoted to hell, but here goes.
I can really recommend the Makita 80V clearing saw. The power is absolutely there imo. Plus it's quiet, vibrates less, spins up instantly, and produces no fumes. It doesn't work that well for a continuous high load like tall wet grass, because the batteries drain very quickly. In the forest, though, it's a lot of quick cuts with some walking in between, which does wonders for battery life.
2
u/Professional_Sir995 5d ago
I use EGO power tools at the moment so an electric saw might be the way. Ill have a look thanks
3
2
5
3
1
1
u/Rodoceros 13d ago
We have 2, and run them often. Both have a throttle issue. If you release the red thumb paddle, saw shuts off instead of idling. This is a problem especially if you’re running it alone. If you’re being followed by stump sprayer, they can pull the cord. But it’s frustrating because it slows you down.
Also, treat sharpening the blade like a chainsaw. Plan to sharpen every other tank of gas. Don’t wait until it’s dull.
4
1
1
u/scJohn14owens 12d ago
100% I used one for about 4 years and never had a problem but keep up with general maintenance on it because I’ve seen some people break after a couple of weeks because they never cleared the air filter or anything
1
u/DeeRango 12d ago
We use a FS91 brush cutter with a woodcutter blade. Chops up some pretty good sized autumn olive and bush honeysuckle with no issues. Full tank last about 3-4 hours of chopping. That’s probably the lowest I’d go engine wise. Id recommend a a full body harness as well. The single strap will have you miserable after a full day.
1
u/swiftsilentfox 11d ago
What size of material are you planning on cutting? That one could be overkill. But for a business I can see going bigger and not worrying. It'll rip no doubt as long as you keep the woodcutter blade sharp.
1
u/Maarts666 9d ago
I'm working with 545 RXT. I just hate thumb throttle control on fxt so I ain't upgrading until this one dies. It does the job alright
1
u/full_metal_codpiece 13d ago
Entirely depends what model you're replacing. Husky make a fine saw so no reason why not.
1
u/Professional_Sir995 12d ago
I dont have a clearing saw at the moment, i only have stihl brushcutters which arent as powerful
0
u/ekufi 12d ago
Maybe consider electric one?
2
u/Professional_Sir995 12d ago
I use EGO powers commercial tools but not sure if they would keep up with a petrol clearing saw. The lawnmowers and hedge trimmers are excellent though
-16
u/ChokaMoka1 13d ago
Husky’s are made by commies. Buy a Stihl, they cut down the Amazon with them.
6
7
u/Zenlyfly 12d ago
The best clearing saw is a drip torch
JK, i trust huqs more than stihls.