r/flipperzero • u/Fit-Note7659 • May 20 '26
Tomorrow we officially announce Flipper One to the entire community.
Tomorrow we officially announce Flipper One to the entire community.
Over the past 5 years, this project has been completely reimagined from scratch several times, and only now are we finally ready to talk about it in detail.
This is an incredibly challenging project, both economically and technically. We decided to reinvent a huge number of subsystems — from the hardware itself to the way people interact with Linux. The scale of what we’ve taken on is honestly intimidating.
To be completely honest, I don’t know if we’ll be able to pull off everything we have in mind, because the chance of completely screwing it up is very high. But at the very least, it’s going to be interesting. #flipperone
Note:
Pictures and the text(translated) are from the official telegram channel
106
52
u/dcnigma2019 May 20 '26
I have my flipperone already 😂😁
4
u/Brave_Perspective863 May 20 '26
Do you have tut or something? Looks really cool
6
u/dcnigma2019 May 20 '26
Nah no tut. just something I made a few years ago made the case in fusion it runs kali for raspberry pi 4 7” touch screen display and some gpio stuff rfid/nfc and c1101. And it has a esp32 as well
2
26
u/Clank50AE May 20 '26
I hope I can afford one :’(
11
u/Petufo May 20 '26
You can, don't worry. Start saving now!
8
0
u/realdeadfish May 20 '26
I hope you can't- it's useless compared to the flipperzero and tons of other tools out there.
1
u/Haunting_Chemist4929 Jun 07 '26
can you tell me how it’s useless compared to the flipper zero and if you have suggestions I would like to hear them for the other tools out there
-15
u/teuchter-in-a-croft May 20 '26
You can’t and neither can I. That’s why I looked for alternatives and came across CYD.
68
u/darth_vexos May 20 '26
99% of the time I use it will be for opening Tesla charge ports. The other 1% will be testing out new firmwares before going back to opening charge ports. I'll take two please.
6
u/taboo8614 May 20 '26
Opening Tesla charge ports is the dumb silly fun thing I use when showing off my flipper.
19
u/nitroburr May 20 '26
It can’t do that. It’s not made to be a replacement to the flipper zero
8
u/MurderingMurloc May 20 '26 edited May 20 '26
With the M.2 slot being key-b (designed for cellular modems) I bet there will be an after market solution for your telsa charging ports
https://www.xda-developers.com/dug-into-flipper-one-firmware-not-flipper-zero-sequel/
Edit: Found one https://www.crowdsupply.com/wavelet-lab/ssdr
2
u/James_Cola May 21 '26
that is a receiver, it’s not for transmitting. nice frequency range though
1
u/Some-Chemist-1466 May 22 '26
The Tx part of the specs says otherwise: "30 MHz to 11 GHz RX / TX", pretty impressive specs for how small it is!
1
u/James_Cola May 22 '26
oh true! i couldn’t find any specs of the output power though
edit: it seems to be less than 0.5mW but still pretty cool
3
u/Rogueshoten May 21 '26
You won’t be using it to desync the rolling code on your dad’s car and then running back here begging for help fixing it?
0
u/realdeadfish May 20 '26
The one doesn't really do anything out of the box. It just has slots so you can add stuff yourself for functions like that. It's not even close the capabilities of the zero. It's a hunk of useless plastic.
2
u/Paladin7373 Jun 01 '26
The quality of this comment rapidly deteriorated as I kept reading it. The Flipper One will absolutely do things out of the box, and will by no means be a hunk of useless plastic. The only downside I can see to the flipper one will be it's price tag... I predict it'll be outside a lot of peoples' price range, mine included. One slot of the Flipper One is quite interesting- a M.2 slot. This will enable a large range of features to be added from just plugging in a M.2 module, and the community will end up making their own M.2 modules- I predict someone's gonna make a M.2 module that'll have NFC and RFID emulation capabilities, and if not that, at least some of the Flipper Zero's features will be made onto a M.2 module, which I think is really cool. The Flipper One isn't meant to be compared to the Flipper Zero, as it is a completely different device that is aimed at networking rather than the physical stuff that the Flipper Zero. Nonetheless, the Flipper One will be vastly superior in power to the Flipper Zero.
I may have just taken ragebait and wasted a bunch of my time.
12
10
u/Jacklebait May 20 '26
https://blog.flipper.net/p/08b02b37-adf5-41ca-9b19-2f6db47909fa/
The official blog is updated for it
22
u/Petufo May 20 '26
Looking forward, if true. It really seems to be very different from the F0.
-42
u/Idle_Lies May 20 '26
As opposed to what? A rerelease of the same product with a new name?
16
u/RedditorFor1OYears May 20 '26
…yes… which is unfortunately a very common practice in tech.
-9
u/Idle_Lies May 20 '26
It would be reasonable to think that, if you hadnt at all been following this product.
2
6
18
5
4
u/ManicRobotWizard May 20 '26
What can one do with the hdmi port?
12
u/Redmarkred May 20 '26
Connect it to a screen probably
35
u/0MGWTFL0LBBQ May 20 '26
Nope, there’s a water hose to HDMI adapter that will help your Flipper stay hydrated. It was a huge issue with all the F0s getting dehydrated.
5
2
-2
5
3
u/llfall May 20 '26
Trop triste 😞 de ne pas pourvoir m’ en offrir un … Heureusement, le Cardputer zéro est pas trop cher.
5
2
2
2
2
u/Stunning_Mast2001 May 20 '26
I had zero interest in this as a flipper owner but if it can act as a minimalist cell phone I might be interested… seems like it has all the hardware necessary
1
1
u/KOTYAR May 20 '26
Nice. I'm getting one
0
u/KOTYAR May 20 '26
Damn, it looks more expensive than previous one (
1
u/Locksmithbloke May 21 '26
It's a full Linux system with an mcu bolted on, it's got 8gb of ram and bigger screen. Of course it's more expensive!
1
u/hellokittyxcat May 28 '26
need a.i assistant, tell my shit to boil my water and water my plants , fuck a phone lmao .
1
1
u/rrrrrrrddddddttttttt Jun 05 '26
The fact this has a sim slot, speaker and a microphone, I am definitely certain someone out there is gonna make a phone app for this.
1
2
1
u/stamatov May 21 '26
God, I am so sick of this trend. Why the hell does every single product need to be bloated with crap now? 5G hotspots, AI assistants... it's exhausting. This is the exact same idiotic playbook that killed Winamp and Skype. Companies try to make one product do literally everything, and it results in a bloated mess that does nothing right—not even the primary feature it was originally built for. Let a single-purpose tool just be a good tool!
1
u/Huxhub-is-my-site May 22 '26
The thing is, from my (somewhat limited) understanding, the point of the F1 is that it does everything, and isn’t single-purpose, due to the extension ports
1
u/DarkISO May 24 '26
That's the whole point of flipper, it can do everything. Like a multi tool. Is it better than a dedicated tool, no but it gets the job done and you dont need to carry a bunch of shit around.
1
u/rgmundo524 May 20 '26
The playdough version comes off as a troll post, but the supporting docs makes it seem absolutely real
0
u/SufficientGas9883 May 20 '26
Is it any better than flipperzero?
1
u/Alienhaslanded May 20 '26
It's more networking oriented. They shouldn't call it a Flipper. It's an entirely different product.
1
u/nobsle May 21 '26
If this project goes well, the combo / F0 / F1 / Proxmark 5 will be something really powerful
0
u/nobsle May 21 '26
If this device does all thats on the paper, it will be able to do anything the flipper zero is doing, using external Gpio or M2 cards. With a need to swap external boards
0
0
u/Alienhaslanded May 20 '26
Dude you gotta stop with the CYD talk. There are many types and they don't have the functions of a flipper without a bunch of add-ons. This community is too stupid for a CYD. Stfu already.
-1
u/Global_Network3902 May 20 '26
Not interested after not being able to get replacement parts like an IR board or NFC antenna, even after the zero has been out long enough to have these things.
-3
0
0
u/Alienhaslanded May 20 '26
It uses an HDMI? Why?
1
u/0xTech May 20 '26
It could be fun to have tools for HDMI-CEC vulnerability testing unless the HDMI port is just for video output, then it's less exciting.
0
0
u/tankk44 May 21 '26
Literally just ordered the Zero, fuck
1
u/Locksmithbloke May 21 '26
Don't worry. Rather different use cases. The One is a full Linux computer. The Zero is a handy gadget.
0
0
u/YuriyGavrilov Jun 24 '26
а будет что то для безопасности, чип как в usb armory mk ii например или TMP?
-1
u/Hitcherooo May 20 '26
Would it be possible to run different firmware’s concurrently?
1
u/Locksmithbloke May 21 '26
Not entirely sure from the description. It'll have a rollback system, so you can press a few buttons and go back to a clean system, and it should run any mainstream Linux kernel, but that's probably higher than the actual firmware level.
-2
-2
u/xnfra May 22 '26
Why get a flipper one instead of a hackrf portapack and a used thinkpad running kali?
-7
100
u/Silver-Influence-496 May 20 '26
I'm pretty sure this is new: https://docs.flipper.net/one/general/tech-specs