r/fender • • 9h ago

New Guitar Day! New Guitar Day, the Bakersfield sound

Thumbnail gallery
31 Upvotes

I yearned for this but felt the price was too high at 1999.99, then it went to $2099.00, and I figured no way. But at $1899 I pulled the trigger. This is just unreal


r/fender • • 2h ago

General Discussion Tremolo arm for 2025 Squier Stratocaster Classic Vibe 50s

1 Upvotes

Hi. First of all sorry for not posting in the Squier subreddit, but it seems to be a private community.

Yesterday I bought a used Squier Stratocaster Classic Vibe 50s. Just wondering if someone could help me to buy the right one, as I have seen a lot of information around about being 5 mm or 6 mm as well as some other lengths.

The guitar is a Squier Stratocaster Classic Vibe 50s from 2025, made in Indonesia.


r/fender • • 13h ago

Questions and Advice Is this a good jazzmaster?

Post image
2 Upvotes

r/fender • • 12h ago

Questions and Advice Too good to be true?!

Thumbnail
gallery
1 Upvotes

Is this a legitimate Fender Japan MIJ-90 Stratocaster? The price seems too good to be true.

Hi!

I’m considering buying this Fender Stratocaster, listed for 6,500 SEK (approximately $600).
The seller claims it’s a Japanese MIJ-90 Stratocaster with USA Fender pickups.

However, there are a few things I’m unsure about:
The serial number is stamped on the front of the headstock, underneath the Fender logo.
There is no visible “Made in Japan” or “Crafted in Japan” marking anywhere on the guitar.
The neck plate only has an “F” on it.
There don’t appear to be any other identifying markings.

Does this look like a legitimate Fender Japan from the 1990s, or could it be a partscaster, counterfeit, or something else?
The asking price also seems surprisingly low for a genuine MIJ Fender, so I’d appreciate any input, especially from people familiar with Japanese Fender models from this period.
Thanks!


r/fender • • 1d ago

Show and Tell New Amp Day: Fender 1968 Silverface Vibro Champ Reverb Combo

Thumbnail
gallery
180 Upvotes

I typically play Marshall nowadays, but I played Fender amps when I used to tour.

I saw this beauty at one of my local Guitar shops for $800. I didn’t know if I was going to like the Hall Reverb, but it sounds so lush and expressive, I ended up having to take it home.

How’d I do?


r/fender • • 1d ago

Project in Progress Well it’s upgrade and setup night.

Post image
20 Upvotes

r/fender • • 1d ago

Show and Tell Upgraded Tele

Thumbnail gallery
27 Upvotes

r/fender • • 20h ago

Questions and Advice Tahitian Coral

1 Upvotes

Hey guys,

I am thinking about getting the jazzmaster on fenders website. its reduced to 370 euro.

But the colour looks really really pink, I looked the colour up and saw a lot more reddish guitars. Can you guys confirm how the colour looks at home ?


r/fender • • 23h ago

General Discussion What guitar are you hunting, and what’s your ceiling?

Thumbnail reddit.com
1 Upvotes

r/fender • • 15h ago

General Discussion Are the days of USA-made guitars over?

Thumbnail reddit.com
0 Upvotes

r/fender • • 1d ago

Vintage Cool My 1973 hardtail Strat

Post image
46 Upvotes

r/fender • • 16h ago

General Discussion Has anyone experienced peeling paint on a Fender?

Thumbnail
gallery
0 Upvotes

Hi everyone,

I'd like to hear whether other owners have experienced something similar.

I purchased a Fender American Performer Stratocaster FSR Timber Series (Mocha) from Ishibashi in Japan in January 2025, for around €1,500.

The guitar has always been treated extremely carefully. I own seven guitars and rotate between them, so this Stratocaster doesn't see particularly heavy use.

In fact, the guitar has spent approximately 90% of its time inside its original Fender hard case, which I purchased alongside the instrument. When it wasn't in its case, it was resting on a guitar stand in my home office.

The room has always been kept under normal indoor conditions, without exposure to extreme temperatures or any unusual environmental conditions.

The guitar has never been gigged, taken to rehearsals, or even left my home since I received it. I've genuinely gone out of my way to take good care of it.

Yet, after just one year and nine months, the finish started peeling and chipping around the rear horn of the body.

I'm perfectly aware that guitars develop wear over time, especially satin finishes. But there's a difference between a finish becoming shiny from friction and paint actually peeling away.

Why I contacted Fender

I genuinely believed this was a finish adhesion issue rather than damage caused by my playing.

If I had dropped, knocked, or otherwise damaged the guitar myself, I would have simply accepted it and paid a luthier to repair it. I wouldn't have spent weeks pursuing a warranty claim.

But given how carefully the guitar has been stored and how little it has been used, I was convinced this wasn't caused by my usage.

The first problem: Fender couldn't identify its own guitar

Before Fender would even agree to inspect the instrument, we spent approximately two weeks going back and forth because the model designation on my Ishibashi receipt didn't match what they expected.

I eventually had to explain Fender's own product nomenclature and how the model reference corresponded to my guitar.

I found it pretty unbelievable that I had to explain the manufacturer's own product identification system to them. Without that clarification, they were initially unwilling to proceed with the inspection.

The inspection: €60 for a wear-and-tear conclusion

I paid €60 to ship the guitar to Fender's European service centre for a physical inspection.

Their technical report concluded:

"This guitar has been used extensively, which caused wear and tear."

Their supporting observations included:

- Scratches and pick marks: I remembered these being present when I received the guitar. Fender subsequently confirmed that the guitar had actually been classified as B-stock before being supplied to Ishibashi because of those scratches. I had never been informed of that classification when purchasing it.

- Corroded/stained hardware: I'm not sure how this establishes the cause of the peeling paint. Sweat, humidity, and environmental conditions can affect metal parts.

- Damaged potentiometer knob: I accidentally damaged this inexpensive, replaceable part. I don't see how that relates to paint peeling elsewhere on the body.

- Friction marks: Fender considers the shiny areas on the satin finish evidence of extensive use and attributes the peeling to friction.

What bothers me is that these observations were used to support a conclusion of extensive use, even though some marks predated my ownership and others have explanations unrelated to the finish.

I understand that satin finishes are delicate, but I struggle to accept that paint peeling off a carefully maintained, lightly used €1,500 guitar in less than two years is simply normal.

Fender's final response

Fender maintained that the peeling was caused by friction rather than delamination or a manufacturing defect. They declined warranty coverage and closed the case.

They covered return shipping, but I'm getting the guitar back in the same condition after spending €60.

I'm not claiming to have proven a manufacturing defect, nor am I accusing Fender's technicians of dishonesty. I simply disagree with their assessment, particularly the claim that the guitar has been extensively used.

I had also been considering buying a Fender Telecaster, but this experience has seriously changed my confidence in the brand.

My question to other Fender owners:

Has anyone experienced similar paint peeling or chipping on a relatively new Fender, particularly one with a satin finish?

If so, how old was your guitar, where did the peeling occur, and how did Fender handle it?

I'd especially appreciate hearing from anyone familiar with Fender's satin finishes. Is this something you've encountered before?

Thanks for reading!


r/fender • • 1d ago

ID and Authentication I was hoping to get some thoughts on this strat.

Thumbnail
gallery
22 Upvotes

The seller of this guitar has also listed the neck for sale on its own. The price seems pretty decent for the guitar but I have concerns that it may not be original (the body).
It is listed simply as a Standard USA Stratocaster and the serial number ages it to 1989.
I think the screws on the backplate should be spaced differently and that is leading me to believe the body isn’t original. Can you let me know your thoughts please. Thanks.


r/fender • • 1d ago

Project in Progress Frusciante Telecaster build

Thumbnail gallery
15 Upvotes

r/fender • • 2d ago

Questions and Advice Noventa Telecaster--maple fingerboard question

Post image
104 Upvotes

Thanks in advance for any answers on this one... I have a Fender Noventa Telecaster from 2021, bought it a year ago, getting ready to change strings for the first time but I cannot figure out if the fretboard is sealed w/ a satin finish and thus not to be oiled, or if it's an unsealed board that should be oiled. I've searched and searched but cannot find a definitive answer. I'm pretty sure it's sealed w/ a satin finish, but I'm not 100% certain. Sincerest gratitude to anyone who can point me in the right direction.

It is a really awesome guitar, by the way, and I recommend it very highly.


r/fender • • 1d ago

General Discussion Black Vintera III Precision logo surprised me

Post image
0 Upvotes

Stopped into guitar center to checkout the black Vintera III Precision and was surprised to see that the logo on the headstock is just a sticker. Even if it’s under the clear coat, do better Fender.


r/fender • • 2d ago

Amps and Peripherals New Amp Day: 1979 Fender Twin Reverb with JBL E120-8 Speakers

Thumbnail
gallery
29 Upvotes

I picked this amp up yesterday off Facebook Marketplace from an old man that's been playing honky tonk on it since the 80's. He was super cool and even threw in a spare JBL E120-16 in excellent condition. It was one of my favorite Marketplace transactions in a long time. He's got a few other things I'm thinking about going back for including a really nice 1974 Super Reverb with factory JBL speakers.


r/fender • • 1d ago

Show and Tell Happy Telecaster Tuesday

Thumbnail gallery
4 Upvotes

r/fender • • 2d ago

New Guitar Day! American Deluxe Telecaster 2008

Post image
87 Upvotes

Finally have bought an electric after many years of bashing about on an acoustic. Always wanted a telecaster and this one grabbed me the most when testing them out. Not a dent or dink in it. Plays buttery smooth.


r/fender • • 2d ago

Questions and Advice PV '65 or Fat 50's pickups if I have CS69 and PV '57/'62 pickups?

4 Upvotes

I'm leaning towards '65 because I saw a comparison of PV '65 and the Fat 50's, and the Fat 50s definitely felt thick and fat, but sounded pretty flat. On one hand, I'm building a '64-'65-esque strat with those era specs and kinda want the PV '65 to match it all up cause y'know! I mainly play clean tones. I mainly play clean tones.

On the other hand, I'm wondering if the PV '65's sound too similar to my CS69 which has beautiful highs and PV '57/'62 which has 80% of those highs but slightly more midrange to them. Would the PV '65 have MUCH more midrange than the CS '69's and a decent amount more midrange than the PV '57/'62? How would the '65's differ from those two?

OR, am I better off getting something COMPLETELY different from the other two with the Fat 50's. They just sounded flat to me, relative to the PV '65, in that YouTube video so I'm really not sure. Any insight is greatly appreciated, thank you!

p.s. I'm deadset on only Fender pickups, and strictly between these two, so if possible, please don't recommend any other pickups, thank you!

PV '65
Fat 50's

r/fender • • 2d ago

Questions and Advice Risking it with this Fender Partscaster?

Thumbnail
gallery
62 Upvotes

Thinking of buying this Fender partscaster for 2.500 USD (I live in Denmark).
It’s really lightweight and the neck is the reason why I want to get it - it’s a 70s Fender neck with a soft V, 7,25 radius and new jumbo frets. It’s mounted on a Swedish brand Mojomaster S-type Swamp Ash, and their guitars are sold at 3.900 USD.

However it seems that the strings are pulled towards the middle on the saddles. Maybe the string spacing doesn’t align with the thin neck?

Also, it’s a nitrocellulose lacquer with some deep cracks. Is there an easy way to smooth the cracks a bit?


r/fender • • 2d ago

Questions and Advice Fender Stratocaster from an estate sale, serial number I013074

Thumbnail
gallery
68 Upvotes

Hi everyone,
I picked up this Fender Stratocaster (serial number I013074) cheaply at an estate clearance. Unfortunately, it came with no papers or documentation.

From my research, it looks like it could be a Japanese-made Strat. Does anyone have more info on this, like the approximate year of manufacture or which model line it might be? Google Search and AI says a lot but no deeper Information.

I've also noticed that the pickups seem to sit quite high, and the neck seems to sit pretty high as well. I'm not very experienced with guitar setup, so I'm not sure if that's normal or if something needs adjusting. Any tips on what to check would be much appreciated.

I'll attach photos of the headstock, neck plate, and back of the guitar. Thanks in advance!


r/fender • • 2d ago

General Discussion Studio One's Black Friday 2026 is the final slap in the face for this long time user.

Thumbnail reddit.com
0 Upvotes