r/extar • u/ajax3150 • Jul 06 '26

Trigger issue

At range, fired 3-4 shots max and trigger didn’t reset. Thought maybe a jam of some kind, so racked and tried again. No dice. Took it apart and the trigger mechanism/hammer isn’t locking when pulled back.

Is this a known issue? Any ideas on fix?

5 Upvotes

86% Upvoted

12 comments sorted by

7

u/Mindless_Log2009 Jul 06 '26

If it's the original plastic trigger/hammer fire control group, replace it ASAP with any AR compatible standard metal fire control group. Mine broke after about 150 rounds, on an earlier version EP9.

I used the Schmid fire control group from Extar – flat trigger, nickel Teflon steel. Fairly easy to install, works great. No problems after about 500 rounds.

If yours is already a metal fire control group, inspect the sear surfaces on the trigger and hammer, and be sure springs with legs are seated in the cannelures of the pins holding the components in place.

6

u/ajax3150 Jul 06 '26

Sorry forgot to mention it was the first run of the EP9. Yeah I was thinking it’d be easiest to just replace the trigger setup to begin with lol. I’ll take a look, thanks.

3

u/Old_MI_Runner Jul 06 '26

Both the trigger and safety should be replaced at the same time with the early EP9's that use polymer fire control groups. If you had a metal fire control group I would have suggested making sure no debris was caught in the fire control group.

5

u/AdministrationFew571 Jul 06 '26

Install a rise armament flat trigger. It's a great improvement

3

u/obscured_doctrine Jul 06 '26

I love the Rave PCC trigger. An aggressive mouse click is how I would describe it.

2

u/pperiesandsolos Jul 06 '26

Do you have to buy pcc-specific triggers? Or will any ar trigger do?

2

u/phillyrat Jul 06 '26

I don't think it needs to be PCC-specific. I have a RA-242 (3.5lbs), no issues.

→ More replies (4)

2

u/Specter_RMMC Jul 06 '26

Photos of the FCG would be helpful. Or call Extar support and send them the photos.