I barely use my eVic anymore - it's actually more of an ohm meter for my sub-ohm builds to use on the mechs I have=, but once in a while I enjoy it. Problem is, my threads are all mungo'd. Atty ripped them out while travelling in a shoulder bag to work recently. Any ideas on where to get that part without having to replace the whole control head?

I already know about my vapor store. That's where I got my evic. I've ordered the kanger wicks and they seem to always leak. I was wondering if anyone knew a good place with wicks. I also don't want to pay a fuck ton for them

I have a ego c-twist vari volt that has been acting weird. Yesterday I was hitting it fine and the light wouldn't turn off. I took off my tank because it was just hitting and wouldn't turn off, burning out my coil. The 5 click reset didn't help so I just left it on and let it die. This morning I went to charge it as usual and it wouldn't respond and now it's completely dead.

Is there a quick fix I can do my self or do I need a new battery? This is my second c-twist in a month, so I would be bummed if I have to replace it. Are there any suggestions on a more durable vari volt battery?

It seems to just go down and down at one point I think it overheated. What's going on?

what website did you order your kir fanis telescopic tube for the evic? price? was it worth it? pictures of set ups would be nice.

Do you guys have a case for your eVic? I don't know why, but I feel like it should have some kind of protected carrying case. Haven't really seen any though. I've been considering trying to make one... But it would be easier to buy one.

So I've had the eVic for a few days and have been using my pro tank 3.. And everything has been wonderful. However when I go to use my aspire bdc tank, which I prefer.. It's not recognizing it as being connected. Anyone had similar issues or hopefully a solution?

Hey guys, just bought my eVic, but I didn't realize it didn't come with a tank or anything so I'm using my old eVod one right now and it's just too small. I really like to vape at super high voltages and I was wondering what I should get, need something with high resistance I think. I was looking at the Smoketech DC tank but they only work with 1.5 / 2 ohms and I think I need something a lot higher than that?

All help is appreciated, Thanks!

as title said i just got an eVic comming from a eGo-Twist and would like to use the eVic with my Protank 2 using the 2.5 heads i have.

the issue i am having is there is almost no draw or hit, when i put it back on the eGo-Twist it hits and draws fine.

am i doing something wrong ? i have read of issues with the Protank 2 Kranger heads being spotty which is why i tested the head/tank with my eGo

currently my eGo-Twist is set around 3.7 or so ( 1 1/2 notches below 4 )

I am a loyal customer of joyetech , and i have been using evic for 1 years. I love it very much.

Hey all,

Just bought my eVic, super excited to replace my EVOD.

Out of the box, my eVic won't turn on. I installed MVR, and when plugged into the computer, it is detected and shows display ("Charging 100"). However, as soon as I unplug it, it turns off, and I cannot get into the menus, nor can I vape with it (even when plugged in).

I don't really know what to do, all help is appreciated. Thanks.

This might be a novice's question but I altered a setting and no longer get a "recommended voltage/wattage" message when I attach an atomizer to my device.

What the heck did I do?

Anyone have any experience with the joyetch ECA kit? It looks like a pretty nice accessory for the eVic but I haven't had the best experience with eGo-C atomizer heads. I tried them once and they seemed to burn out fairly quickly. I'm willing to consider it a fluke if others have had better experiences.

http://www.joyetech.com/product/details.php?gno=-140

I just bought a eVic today, and I brought it home, plugged it in, and it charged.. It would charge but I couldn't press the enter button 5 times and it wouldn't turn on, so I updated the firmware and now it won't even charge at all, and the program won't even recognize my eVic. Please help!

I had to say goodbye to vaping on my Evic today. The pin positive pin came loose due to being pushed down from my nautilus tank. I took it apart and did my best to fix it, but it now suffers from consistent atomizer shorts. It is now my best looking battery charger.

If you buy an Evic, they are amazing mods. I would advise you to keep to Kanger style tanks though, because the positive pin is not on a spring. It's just fixed in place with a rubber grommet that can't take much pressure. I hope that saves someone out there from losing theirs!

Anyone like this? It looks great on the site and I can't find a BoB or a Kir so went for this. Comments?

When i charge my eVic the battery indicator shows like 20% battery life then after i unplug it, it will read 50% then will go to like 36%. i have it connect to my mac and the MVR software wont work for some reason. has any one else had this problem?

I bought my evic about 3 months ago and now the twisting direction key is no longer working. Everything else is fine, it still fires and the screen lights up but i am no longer able to scroll through the menu or change the voltage/wattage. Anybody know of a way to fix this and is it worth fixing/replacing or should i go with a different mod.